SWD.de/+ Hersteller +/Opto 22 Corp./OPT-OPTO 22 SNAP family of modular controllersArtikel

OPT-B300 425,00 �

Thu, 04 Apr 2013 19:22:31 +0200

OPTO 22 SNAP Analog/Digital Brain, Mistic/Optomux Protocoll

OPT-B300-B 425,00 �

Thu, 04 Apr 2013 19:22:31 +0200

OPTO 22 SNAP Analog/Digital Brain, Mistic Protocoll

OPT-B300-HA 550,00 �

Thu, 04 Apr 2013 19:22:31 +0200

OPTO 22 SNAP Arcnet 32-channel Analog/Digital Brain, obsolete

OPT-OPTOTERMINAL-G20 215,00 �

Thu, 04 Apr 2013 19:22:46 +0200

OPTOTERMINAL-G20 OptoTerminal-G20 for SNAP 32-Channel Digital Modules

OptoTerminal-G20 operator interface terminal is used for commissioning and troubleshooting SNAP high-density digital
(HDD) modules that include a diagnostic port. The OptoTerminal-G20 displays the status of an HDD module’s points on a
two-line LCD display and can also be used to turn output points on and off.

The terminal can be used with the following HDD modules:
SNAP-IDC-32
SNAP-ODC-32-SRC
SNAP-ODC-32-SNK
SNAP-IDC-16
SNAP-IAC-16
SNAP-IAC-A-16

OPT-RTCBATT 24,50 �

Thu, 04 Apr 2013 19:22:48 +0200

RTCBATT Replacement backup battery for SNAP-ENET-RTC brain

The SNAP-ENET-RTC Ethernet brain contains a battery-backed real-time clock. RTCBATT is the replacement backup
battery for the brain.

OPT-SNAP-AIARMS 195,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AIARMS SNAP 2-Ch 0-10 amp RMS Analog Input Module

The SNAP-AIARMS provides two channels of 0-10 amp RMS AC/DC input. An ideal input is the 5-amp secondary of a
standard current transformer used to monitor AC line current.

Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated
from other modules and devices.

For a similar module with two isolated channels, see SNAP-AIARMS-i.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

Input Range	0 to 10 amp RMS AC/DC
Input Over-Range	To 11 amps
Input Resistance	0.005 ohms
Maximum Input	11 amps AC/DC
Accuracy (AC)	±8 mA and ±0.2% reading
Resolution	400 microamps
DC Reversal	±16 mA (0.16%)
Input Response Time (Step Change)	5% (12.5 V) in 100 mS 63.2% (158 V) in 200 mS 99% (248 V) in 1200 mS
Data Freshness (Max)	32.3 ms
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB at 60 Hz
Maximum Operating Common Mode Voltage	250 V
Isolation	1500 V
Power Requirements	5 VDC (±0.15 V) at 170 mA
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	UL, FM, CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AIARMS-i 265,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AIARMS-i SNAP Isolated 2-Ch 0-10 amp RMS Analog Input Module

The SNAP-AIARMS-i module provides two isolated channels with an input range of 0 to 10 amps RMS AC/DC. An ideal
input is the 5-amp secondary of a standard current transformer used to monitor AC line current. The module may also be
used to monitor AC current to greater than a 100-amp range, using a current transformer of suitable ratio.

The two channels are isolated from each other; they do not share any field connection. The SNAP-AIARMS-i module is an
excellent choice for differential current measurements.

If you need Factory Mutual approval, choose the SNAP-AIARMS-i-FM instead.

If you do not need channel-to-channel isolation, see SNAP-AIARMS.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

Input Range	0 to 10 amp RMS AC/DC
Input Over-Range	To 11 amps
Input Resistance	0.005 ohms
Maximum Input	11 amps AC/DC
Accuracy (AC)	±8 mA and ±0.2% reading
Resolution	400 µA
DC Reversal	±16 mA (0.16%)
Input Response Time (Step Change)	63.2% (6.32 A) in 50 mS 99% (9.92 A) in 75 mS
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB at 60 Hz
Maximum Operating Voltage Between Channels Common Mode Voltage	250 V 250 V
Isolation: Optical	4000 V
Isolation: Transformer	1500 V
Isolation: Channel to Channel	250 V continuous (1500 V transient)
Power Requirements	5 VDC (±0.15 V) at 200 mA
Ambient Temperature: Operating Storage	0 °C to 70 °C -25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	CE, RoHS, DFARS FM (SNAP-AIARMS-FM only)
Warranty	Lifetime

OPT-SNAP-AIARMS-i-FM 305,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SBTA Single Brick Terminal Adapter

No specifications for this product.

OPT-SNAP-AICTD 182,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AICTD SNAP 2-Ch Analog Temperature Input Module - ICTD

The SNAP-AICTD provides two channels of analog temperature input from any industry-standard Integrated Circuit
Temperature Device (ICTD). Simple two-wire connections are made to the pluggable terminal strip on top of the module.
Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated
from other modules and devices.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

Input Range with ICTD Probe	-40 °C to +100 °C
Module Input Range Zero Scale Full Scale	-273 °C +150 °C
Resolution	0.017 °C
Accuracy with ICTD Probe	±0.8 °C
Sensitivity	1.0 microamps/ °C
Data Freshness (Max)	167 ms (2-channel module) 355 ms (4-channel module)
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Operating Common Mode Voltage	250 V
Isolation	1500 V
Power Requirements	5 VDC (± .015 ) @ 150 mA
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	UL, FM, CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AICTD-4 245,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AICTD-4 SNAP 4-Ch Analog Temperature Input Module - ICTD

The SNAP-AICTD-4 provides four channels of analog temperature input from any industry-standard Integrated Circuit
Temperature Device (ICTD). Simple two-wire connections are made to the pluggable terminal strip on top of the module.
Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated
from other modules and devices.

This module can be used with SNAP PAC brains and R-series controllers.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. It can also be used with legacy SNAP Ethernet-based brains. Analog, digital, and serial I/O modules can all be
on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an
Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.

Input Range with ICTD Probe	-40 °C to +100 °C
Module Input Range Zero Scale Full Scale	-273 °C +150 °C
Resolution	0.017 °C
Accuracy with ICTD Probe	±0.8 °C
Sensitivity	1.0 microamps/ °C
Data Freshness (Max)	167 ms (2-channel module) 355 ms (4-channel module)
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Operating Common Mode Voltage	250 V
Isolation	1500 V
Power Requirements	5 VDC (± .015 ) @ 150 mA
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	UL, FM, CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AICTD-8 425,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AICTD-8 SNAP 8-Ch Analog Temperature Input Module - ICTD

The SNAP-AICTD-8 provides four channels of analog temperature input from any industry-standard Integrated Circuit
Temperature Device (ICTD). Simple two-wire connections are made to the pluggable terminal strip on top of the module.
Although the eight channels are not isolated from each other, the module is transformer isolated and optically isolated
from other modules and devices.

This module can be used with SNAP PAC brains and R-series controllers.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. (This module cannot be used with legacy SNAP brains.) Analog, digital, and serial I/O modules can all be on
the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-
Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.

Input Range with ICTD Probe	-40 °C to +100 °C
Module Input Range Zero Scale Full Scale	-273 °C +150 °C
Data Freshness (Max)	0.28 seconds
Resolution	0.017 °C
Accuracy with ICTD Probe	±0.8 °C
Sensitivity	1.0 mA/ °C
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Operating Common Mode Voltage	250 V
Isolation	1500 V
Power Requirements	5 VDC (± .015 ) @ 170 mA
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	1.7 in-lb (0.19 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AILC 275,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AILC SNAP Load Cell Input Module, 10 VDC Excitation, 2 or 3 mV/V Input Sensitivity

The SNAP-AILC input module works with 2 mV/V and 3 mV/V load cells as a load cell front end. Using a separate 24 VDC
power source (purchased separately), the module provides isolated 10 VDC bridge excitation for up to four 350 ohm or
415 ohm load cells.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

NOTE: In addtion to SNAP PAC brains and R-series controllers, this module also works with the following legacy brains, if
they have firmware version R6.1c or newer: SNAP-B3000-ENET, SNAP-ENET-S64, SNAP-UP1-ADS, and SNAP-UP1-M64.

Input Range Sensitivity: SNAP-AILC SNAP-AILC-2	2 mV/V or 3 mV/V (Over range ± 2.2 mV or ± 3.3 mV) 3 mV/V or 4 mV/V (Over range ± 3.3 mV or ± 4.4 mV)
Input Resistance	100 Megohms differential
Resolution: Analog Scale Points	>22 bits + sign (± 6,400,000 counts = ± 100% of scale)
Response Time, Data Freshness	See the following table
DC Reversal (Input)	0.015% (±1000 counts of reading @ 6,400,000 F.S.)
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB at 60 Hz
Maximum Survivable Input	± 15 volts across module load cell connector
Maximum Operating Common Mode Voltage	250 V
Accuracy (% Full Scale): Offset Gain	± 0.05% (= 3,200 counts out of 6,400,000, out of box) ± 0.05% (= 3,200 counts out of 6,400,000, out of box)
Usable Resolution at Default Configuration (Fast)	38 nV - sign and 19 bits (±524,288 counts @ channel 2) At filter weight 64, settles to 99.9% of final reading in 3.9 s.
DRIFT: Gain Offset	40 PPM / °C 10 PPM / °C
Isolation: Optical	4000 V
Isolation: Transformer	1500 V
Rack Power Requirements	5.00 VDC to 5.20 VDC @ 120 mA
24V Bridge Supply: Input Voltage Input Current Output Fault Current	24 VDC nominal (22 V min. to 30 V max.) 40 mA for one load cell or 115 mA for four load cells 124 mA typical (field fault—shorted bridge)
Ambient Temperature: Operating Storage	0 to 70 °C -25 to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AILC-2 275,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AILC-2 SNAP Load Cell Input Module, 10 VDC Excitation, 3 or 4 mV/V Input Sensitivity

The SNAP-AILC-2 input module works with 3 mV/V and 4 mV/V load cells as a load cell front end. Using a separate 24
VDC power source (purchased separately), the module provides isolated 10 VDC bridge excitation for up to four 350 ohm
or 415 ohm load cells.

The SNAP-AILC-2 is primarily used with high-quality 4 mV/V load cells to gather data from force measurement testing.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

NOTE: In addtion to SNAP PAC brains and R-series controllers, this module also works with the following legacy brains, if
they have firmware version R6.1c or newer: SNAP-B3000-ENET, SNAP-ENET-S64, SNAP-UP1-ADS, and SNAP-UP1-M64.

Input Range Sensitivity: SNAP-AILC SNAP-AILC-2	2 mV/V or 3 mV/V (Over range ± 2.2 mV or ± 3.3 mV) 3 mV/V or 4 mV/V (Over range ± 3.3 mV or ± 4.4 mV)
Input Resistance	100 Megohms differential
Resolution: Analog Scale Points	>22 bits + sign (± 6,400,000 counts = ± 100% of scale)
Response Time, Data Freshness	See the following table
DC Reversal (Input)	0.015% (±1000 counts of reading @ 6,400,000 F.S.)
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB at 60 Hz
Maximum Survivable Input	± 15 volts across module load cell connector
Maximum Operating Common Mode Voltage	250 V
Accuracy (% Full Scale): Offset Gain	± 0.05% (= 3,200 counts out of 6,400,000, out of box) ± 0.05% (= 3,200 counts out of 6,400,000, out of box)
Usable Resolution at Default Configuration (Fast)	38 nV - sign and 19 bits (±524,288 counts @ channel 2) At filter weight 64, settles to 99.9% of final reading in 3.9 s.
DRIFT: Gain Offset	40 PPM / °C 10 PPM / °C
Isolation: Optical	4000 V
Isolation: Transformer	1500 V
Rack Power Requirements	5.00 VDC to 5.20 VDC @ 120 mA
24V Bridge Supply: Input Voltage Input Current Output Fault Current	24 VDC nominal (22 V min. to 30 V max.) 40 mA for one load cell or 115 mA for four load cells 124 mA typical (field fault—shorted bridge)
Ambient Temperature: Operating Storage	0 to 70 °C -25 to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AIMA2-i 265,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AIMA2-i SNAP 2-Ch Isolated -1 mA to +1 mA Analog Current Input Module

The SNAP-AIMA2-i module provides two isolated channels with an input range of -1 mA to +1 mA. This module does not
supply loop excitation current.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

Input Range	-1 mA to +1mA
Maximum Over Range	± 10% (= ± 27500 counts)
Resolution	0.04 µA
Input Response Time (% of span/delta I/delta time)	99.9 %/19.9 µA/10 ms
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Survivable Input	11 mA or 28 VDC
Maximum Operating Common Mode Voltage	250 V
Accuracy	0.05% (0.05 µA)
DRIFT: Gain Temperature Coefficient	30 PPM/ °C
DRIFT: Offset Temperature Coefficient	15 PPM/ °C
Isolation: Optical	4000 V
Isolation: Transformer	1500 V
Isolation: Channel to Channel	250 V continuous (1500 V transient)
Power Requirements	5 VDC (±0.15 ) @ 200 mA
Input Resistance	5 K ohms (each channel)
Ambient Temperature: Operating Storage	0 °C to 70 °C -25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AIMA-32 995,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AIMA-32 SNAP 32-Ch -20mA to +20mA Analog Current Input Module

The SNAP-AIMA-32 provides 32 channels of -20 mA to +20 mA analog current input. The module does not supply loop
excitation current. Although the 32 channels are not isolated from each other, the module is transformer isolated and
optically isolated from other modules and devices.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for
PC-based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

CAUTION: We strongly recommend that you use the SNAP-AIMA-HDB breakout rack and SNAP-HD-BF6 wiring harness
with this module. Miswiring of any point on the module can cause severe damage; the breakout rack protects the
module from many wiring errors.

Compatibility: This module can be used only with SNAP PAC brains and R-series controllers. See SNAP-AIMA for a two-
channel module that can also be used with legacy SNAP Ethernet and serial brains.

If you need Factory Mutual approval, see the SNAP-AIMA-32-FM.

For a similar module that provides two isolated channels, see SNAP-AIMA-i.

For a module that provides two isolated channels and supplies loop excitation, see SNAP-AIMA-iSRC.

Input Range	-20 mA to +20 mA
Over-Range Limits	From -22 to +22 mA (+/-20 mA range)
Resolution	0.8 microamps
Input Filtering	-3 dB @ 31 Hz
Data Freshness (Max)	1.15 s
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Survivable Input	36 mA or 9 VDC
Maximum Operating Common Mode Voltage	250 V
Accuracy	0.1% (20 microamps)
DRIFT: Gain Temperature Coefficient	30 PPM/ °C
DRIFT: Offset Temperature Coefficient	15 PPM/ °C
Isolation	1500 V, field to logic
Power Requirements	5 VDC (±0.15 ) @ 150 mA
Input Resistance - Single Ended	100 ohms (each channel)
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	SNAP-AIMA-32: UL, CE, RoHS, DFARS. SNAP-AIMA-32-FM: CE, FM, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AIMA-32-FM 1.145,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AIMA-8 SNAP 8-Ch -20mA to +20mA Analog Current Input Module

The SNAP-AIMA-8 provides eight channels of -20 mA to +20 mA current input. The module does not supply loop
excitation current. Although the eight channels are not isolated from each other, the module is transformer isolated and
optically isolated from other modules and devices.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for
PC-based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

Compatibility: This module can be used only with SNAP PAC R-series controllers, SNAP PAC EB-series Ethernet brains,
and SNAP PAC SB-series serial brains.

NOTE: This module does not provide channel-to-channel isolation. If you need an isolated module, see the two-channel
SNAP-AIMA-i module.

Input Range	-20 mA to +20 mA
Over-Range Limits	From -22 to +22 mA (+/-20 mA range)
Resolution	0.8 microamps
Data Freshness (Max)	0.28 seconds
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Survivable Input	36 mA or 9 VDC
Maximum Operating Common Mode Voltage	250 V
Accuracy	0.05% (10 microamps)
DRIFT: Gain Temperature Coefficient	30 PPM/ °C
DRIFT: Offset Temperature Coefficient	15 PPM/ °C
Isolation	1500 V
Power Requirements	5 VDC (±0.15 ) @ 170 mA
Input Resistance - Single Ended	100 ohms (all channels share the same reference point)
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	1.7 in-lb (0.19 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AIMA-4 245,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AIMA-4 SNAP 4-Ch -20mA to +20mA Analog Current Input Module

The SNAP-AIMA-4 provides four channels of -20 mA to +20 mA analog current input. The module does not supply loop
excitation current. Although the four channels are not isolated from each other, the module is transformer isolated and
optically isolated from other modules and devices.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for
PC-based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.

NOTE: This module can be used with SNAP Ethernet-based brains and on-the-rack controllers. See SNAP-AIMA for a
two-channel module that can also be used with legacy SNAP serial brains.

For a similar module with 32 channels, see the SNAP-AIMA-32 (requires a SNAP PAC brain or R-series controller).

For a similar module that provides two isolated channels, see SNAP-AIMA-i.

For a module that provides two isolated channels and supplies loop excitation, see SNAP-AIMA-iSRC.

Input Range	-20 mA to +20 mA
Over-Range Limits	From -22 to +22 mA (+/-20 mA range)
Resolution	0.8 microamps
Input Response Time (% of span/ delta I/delta tme)	99.9% / 19.9 mA / 10 ms
Data Freshness (Max)	SNAP-AIMA: 11.5 ms SNAP-AIMA-4: 23 ms
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Survivable Input	36 mA or 9 VDC
Maximum Operating Common Mode Voltage	250 V
Accuracy	0.05% (10 microamps)
DRIFT: Gain Temperature Coefficient	30 PPM/ °C
DRIFT: Offset Temperature Coefficient	15 PPM/ °C
Power Requirements	5 VDC (±0.15 ) @ 170 mA
Input Resistance - Single Ended	200 ohms (each channel)
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	UL, FM, CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AIMA-8 425,00 �

Thu, 04 Apr 2013 19:22:48 +0200

SNAP-AIMA-8 SNAP 8-Ch -20mA to +20mA Analog Current Input Module

Input Range	-20 mA to +20 mA
Over-Range Limits	From -22 to +22 mA (+/-20 mA range)
Resolution	0.8 microamps
Data Freshness (Max)	0.28 seconds
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Survivable Input	36 mA or 9 VDC
Maximum Operating Common Mode Voltage	250 V
Accuracy	0.05% (10 microamps)
DRIFT: Gain Temperature Coefficient	30 PPM/ °C
DRIFT: Offset Temperature Coefficient	15 PPM/ °C
Isolation	1500 V
Power Requirements	5 VDC (±0.15 ) @ 170 mA
Input Resistance - Single Ended	100 ohms (all channels share the same reference point)
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	1.7 in-lb (0.19 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	Lifetime

OPT-SNAP-AIMA-HDB 250,00 �

Thu, 04 Apr 2013 19:22:49 +0200

SNAP-AIMA-HDB Breakout Board for SNAP-AIMA-32 Analog Input Module

The SNAP-AIMA-HDB is a convenient breakout board for wiring field devices to a 32-channel SNAP-AIMA-32 analog
input module. This breakout board is strongly recommended for use with the SNAP-AIMA-32, because miswiring of any
point on the module can cause severe out-of-warranty damage. The breakout rack protects the module from many
wiring errors.

Use the SNAP-HD-BF6 cable to connect the module to the breakout board.

NOTE: If you need a Factory Mutual-approved board, see the SNAP-AIMA-HDB-FM instead.

OPT-SNAP-AIMA-HDB-FM 290,00 �

Thu, 04 Apr 2013 19:22:49 +0200

SNAP-AIMA-32 SNAP 32-Ch -20mA to +20mA Analog Current Input Module

Input Range	-20 mA to +20 mA
Over-Range Limits	From -22 to +22 mA (+/-20 mA range)
Resolution	0.8 microamps
Input Filtering	-3 dB @ 31 Hz
Data Freshness (Max)	1.15 s
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Survivable Input	36 mA or 9 VDC
Maximum Operating Common Mode Voltage	250 V
Accuracy	0.1% (20 microamps)
DRIFT: Gain Temperature Coefficient	30 PPM/ °C
DRIFT: Offset Temperature Coefficient	15 PPM/ °C
Isolation	1500 V, field to logic
Power Requirements	5 VDC (±0.15 ) @ 150 mA
Input Resistance - Single Ended	100 ohms (each channel)
Operating Temperature	0 °C to 70 °C
Storage Temperature	-25 °C to 85 °C
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	SNAP-AIMA-32: UL, CE, RoHS, DFARS. SNAP-AIMA-32-FM: CE, FM, RoHS, DFARS
Warranty	Lifetime