SWD.de/+ Manufacturer +/B&E Technologies/BET-Network Ethernet Adapters and BOOT ROMS 10/100/1000Mbps QNX4, former Corman Tech products

BET-FE-003 60,00 �

Wed, 26 Jun 2013 11:10:51 +0200

FE-003
100FX FAST ETHERNET BOOT ROM QNX 4
Works with FE-130T & FE-130C - 100FX Fast Ethernet Adapter PCI

BET-E-001 60,00 �

Thu, 04 Apr 2013 19:13:58 +0200

QNX4 Network BOOT ROM for E-104

BET-E005 60,00 �

Wed, 26 Jun 2013 11:05:20 +0200

E005
ETHERNET BOOT ROM QNX 4
Works with E-112 - 10Base Ethernet Adapter PCI

BET-E-104 99,00 �

Thu, 04 Apr 2013 19:13:59 +0200

E-104, 10base Ethernet Adapter ISA (successor for CT-E104, Corman Tech) opt:BOOT-ROM E-001, product is EOL, ask

BET-E-104TP 82,00 �

Tue, 05 Jan 2016 14:35:40 +0100

B&E Technologies E-104TP

10base-T Ethernet Adapter for ISA Bus

This is a 16-bit Ethernet NE2000 compatible Adapter for the ISA bus. It supports jumper-less configuration with an easy to use configuration program. It also supports Plug and Play configuration. A single jack connects to unshielded twisted pair (UTP) network cabling. The adapter is supplied with a QNX network driver. A QNX network boot ROM is also available.
LAN Interface
8/16 bit ISA bus
10Mbps transmission rate
NE2000 compatible
Full or half duplex auto negotiation
I/0 mapped (Can be set in the range from 200 to 3E0 in increments of 20)
Interrupts (2, 3, 4, 5, 10, 11, 12, 15)
ROM: Optional Boot ROM
RAM: 16KB packet buffer
Jumper-less NE2000 configuration
Configuration via PnP BIOS or supplied QNX setup programs
Uses NE2000 drivers

Operating Environment
Power:	+5V DC @ 0.5A max.
Operating Temperature:	0ºC to 55ºC
Storage Temperature:	-40ºC to 70ºC
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Physical Specifications
PCB mounted low profile RJ-45
LED indicator for link status: indicates link is operating normally
Dimensions: 157mm x 60mm (6.18” x 2.36”)

Warranty	2 years

Cabling	Category 3 or better unshielded twisted pair
	Distance from node to hub: 100m (325 ft)

ALSO AVAILABLE
CT-E001 QNX Boot ROM

BET-E-112 82,00 �

Thu, 04 Apr 2013 19:14:00 +0200

B&E Technologies E-112

10base Ethernet Adapter for PCI Bus

This is a 32-bit Ethernet Adapter for the PCI bus. It supports jumperless PCI Plug and Play configuration. It has jacks for unshielded twisted pair or coax connections to the network. The adapter is supplied with a QNX network driver, along with drivers for most other popular operating systems. A QNX network boot ROM is also available.
LAN Interface
PCI bus (PCI specifications revision 2.1)
10Mbps transmission rate
NE2000 compatible
Full or half duplex auto negotiation
I/0 mapped (Set from PCI system BIOS)
Interrupts (Set from PCI system BIOS)
ROM: Optional Boot ROM
Jumperless configuration via PCI system BIOS
Autodetect BNC or UTP interface
Drivers for most popular networking operating systems

Operating Environment
Power:	+3.3VDC @ 758mA max
Operating Temperature:	0ºC to 55ºC
Storage Temperature:	-40ºC to 70ºC
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Physical Specifications
PCB mounted low profile RJ-11 and BNC Connectors
LED indicator for link status
Dimensions: 120mm x 60mm (4.72” x 2.36”)

Warranty	2 years

Installation Considerations
ETHERNET
Twisted Pair Cable	Category 3 or better unshielded twisted pair
Distance from node to hub: 100m (325 ft) Based on recommended maximum of 5 links and 4 repeaters between nodes.
Coax Cable	Thin coaxial cable: RG-58A/U 50 ohm coaxial cable (0.2 inch diameter)
	Maximum Segment length: 185m (600 ft)
	Minimum Segment length: 0.5m (1.6 ft)
	Maximum number of coax segments between nodes: 5
	Maximum number of nodes per coax segment: 30
	BNC 50 ohm terminator required at each end of trunk and one must be grounded

Conforms to the Following Standards
Ethernet:	IEEE 802.3 10base-T and 10base-2
EMC:	EN55022:1994 CISPR 22
	EN61000-3-2:
	EN61000-3-3:1995
	EN50024:1998

Products are marked as certified to the CE standards.

ALSO AVAILABLE	CT-E005 QNX Boot ROM

BET-FE-005 60,00 �

Mon, 31 Oct 2016 19:25:53 +0100

FE-005

10/100TX FAST ETHERNET BOOT ROM PCI QNX 4
Works with FE-124 - 100TX Fast Ethernet Adapter PCI

BET-FE-124 111,00 �

Thu, 25 Nov 2021 12:48:16 +0100

B&E Technologies FE-124

Fast Ethernet Adapter for PCI Bus

The FE-124 100TX Fast Ethernet Adapter CPI is a 32-bit LAN adapter for use in personal computers with a Peripheral Component Interconnect (PCI) computer bus. This adapter is a dual-speed adapter and features a single connector for either a 10magabits per second (10Mbps) or a 100 megabits per second (100Mbps) IEEE 802.3u Ethernet network connection over unshielded twisted-pair (UTP) cable. The adapter can automatically negotiate the connection type and switch to either 10 Mbps or 100 Mbps, full or half duplex.
Adapter Features
High performance bus master operation with low processor utilization
Boot ROM socket (QNX 4 Boot ROM available)
Automatically senses 10 Mbps or 100 Mbps connection and configures the speed accordingly
PCI revision 2.1 compliance, 32-bit PCI half-card
Status LED indicates link up
100base-TX connection with UTP Category 5 cabling
10base-T connection with UTP Category 3,4, 5 cabling
Auto negotiation or software configurable to operate in full-duplex mode, increasing aggregate bandwidth up to 20 Mbps and 200 Mbps
QNX 4 network driver on the adapter driver diskette

Operating Environment
Power:	+3.3VDC @ 378mA max.
Operating Temperature:	0ºC to 50ºC
Storage Temperature:	-25ºC to 70ºC
Operating Humidity:	10% to 70% (non-condensing)
Storage Humidity:	10% to 90% (non-condensing)

Physical Specifications
PCB mounted low profile RJ-45 connector
LED indicator: link status
Dimensions: 120mm x 58mm (4.72" x 2.28")

Warranty	2 years

ETHERNET
Twisted Pair Cable	Category 3 or better unshielded twisted pair
	Distance from node to hub: 100m (325 ft)
	Total network span: 500m (1320 ft) Based on recommended maximum of 5 links and 4 repeaters between nodes.

FAST ETHERNET
Twisted Pair Cable	Category 5 unshielded twisted pair
	Distance from node to hub: 100m (325 ft)
	Total network span: 205m (670 ft)

BET-FE-130C 400,00 �

Thu, 04 Apr 2013 19:14:01 +0200

B&E Technologies FE-130C

100FX Fiber Fast Ethernet Adapter for PCI Bus

This is a 32-bit Bus Mastering Fiber Optic Fast Ethernet Adapters for the PCI bus. It supports 100Mbps Fast Ethernet connections over distances of up to 2 km and jumperless Plug and Play configuration. The adapter is supplied with a QNX 4 network driver. A QNX network boot ROM is also available. This adapter has got SC connectors.
Adapter Features
32-bit bus mastering PCI 2.0 bus
100Mbps transmission rate
Full or half duplex
I/O Mapped (set by PCI BIOS)
Interrupts (set by PCI BIOS)
ROM: Optional Boot ROM
PnP jumperless configuration by PCI bus
QNX 4 network driver on the adapter driver diskette

Operating Environment
Power:	+5V DC @ 500mA max
Operating Temperature:	0ºC to 40ºC
Storage Temperature:	-40ºC to 70ºC
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Warranty	2 years

Rev 07/10

BET-FE-130T 475,00 �

Thu, 04 Apr 2013 19:14:02 +0200

B&E Technologies FE-130T

100FX Fiber Fast Ethernet Adapter for PCI Bus

This is a 32-bit Bus Mastering Fiber Optic Fast Ethernet Adapter for the PCI bus. It supports 100Mbps Fast Ethernet connections over distances of up to 2 km and jumperless Plug and Play configuration. The adapter is supplied with a QNX 4 network driver. A QNX network boot ROM is also available. This adapter has got ST connectors.
Adapter Features
32-bit bus mastering PCI 2.0 bus
100Mbps transmission rate
Full or half duplex
I/O Mapped (set by PCI BIOS)
Interrupts (set by PCI BIOS)
ROM: Optional Boot ROM
PnP jumperless configuration by PCI bus
QNX 4 network driver on the adapter driver diskette

Operating Environment
Power:	+5V DC @ 500mA max
Operating Temperature:	0ºC to 40ºC
Storage Temperature:	-40ºC to 70ºC
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Warranty	2 years

BET-GE-001 70,00 �

Wed, 30 Jul 2014 19:25:24 +0200

QNX4 Network BOOT ROM for GE-100

BET-GE-100 123,00 �

Thu, 25 Nov 2021 12:48:07 +0100

B&E Technologies GE-100

Gigabit Ethernet Adapter for PCI Bus

The GE-100 Gigabit Ethernet Adapter PCI is a 32-bit LAN adapter for use in personal computers with a Peripheral Component Interconnect (PCI revision 2.2 or later) computer bus. This adapter is a Tri-speed adapter that features a single RJ45 connector for either a 10 Mbps (megabits per second) IEEE 802.3 or 100Mbps IEEE 802.3u or 1000Mbps IEEE 802.3ab Ethernet network connection over unshielded twistedpair (UTP) cable. The adapter can automatically negotiate 10/100/1000 Mbps, full or half duplex.
Adapter Features
High performance bus master operation with low processor utilization
Boot ROM socket (QNX 4 Boot ROM available)
QNX 4 network driver and boot ROM configuration program supplied on the adapter driver diskette
Automatically senses 10/100/1000 Mbps (10base-T/100base-T/1000base-T) connection and configures the speed accordingly
Auto negotiation or software configurable to operate in full-duplex mode, increasing aggregate bandwidth up to 2000 Mbps
Status LED’s indicates link up, link speed and network activity
Automatic crossover support for crossover or regular cabling
UTP Category 5 cabling

Operating Environment
Power:	+3.3VDC @ 378mA max.
Operating Temperature:	0ºC to 50ºC
Storage Temperature:	-25ºC to 70ºC
Operating Humidity:	10% to 70% (non-condensing)
Storage Humidity:	10% to 90% (non-condensing)

Physical Specifications
PCB mounted low profile RJ-45 connector
LED indicators for: link status, speed, network activity
Dimensions: 120mm x 58mm (4.72" x 2.0")

Warranty	2 years
Cabling	Category 5 unshielded twisted pair
	Maximum cable length 100m (325 ft)