SWD.de/+ Manufacturer +/B&E Technologies/BET-Switches and Media Converter QNX4, former Corman Tech products

BET-FEC-050C 288,00 �

Thu, 04 Apr 2013 19:14:02 +0200

B&E Technologies FE-050C

100FX Fiber Fast Ethernet Adapter for PCI Bus

The 10/100BASE-TX to 100BASE-FX media converter series provides a media conversion allowing high-speed integration of fiber optic and twisted pair segments. With 10BASE-T and 100BASE-TX support, the converters provide seamless translation between Ethernet and Fast Ethernet networks. A complete set of LEDs allows for quick status verification.
Converter Features
Convert speed and media type
Support full wire speed conversion
Support 10Mbps and 100Mbps speed on TP connections
Auto MDI/MDI-X detection function on the TP port
Auto-negotiation function on the TP port
Link fault pass through function
Provide manual configuration settings for TP port to support connection to non-auto negotiation devices
Transparent to 802.1Q VLAN tagged packets
Far End Fault function on FX port
Provide LED status display for remote TP port monitoring
Provide Loop Back Test function for installation diagnostics
Support wide range of fiber options on the FX port
Low power consumption

Operating Environment
Operating Input Voltages:	+4.75V ~ +12.6V
Power consumption:	2W max. (0.27A@+7.5V)
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-20°C to 85°C
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Warranty	2 years

BET-FEC-050T 288,00 �

Thu, 04 Apr 2013 19:14:02 +0200

B&E Technologies FE-050T

100FX Fiber Fast Ethernet Adapter for PCI Bus

The 10/100BASE-TX to 100BASE-FX media converter series provides a media conversion allowing high-speed integration of fiber optic and twisted pair segments. With 10BASE-T and 100BASE-TX support, the converters provide seamless translation between Ethernet and Fast Ethernet networks. A complete set of LEDs allows for quick status verification.
Converter Features
Convert speed and media type
Support full wire speed conversion
Support 10Mbps and 100Mbps speed on TP connections
Auto MDI/MDI-X detection function on the TP port
Auto-negotiation function on the TP port
Link fault pass through function
Provide manual configuration settings for TP port to support connection to non-auto negotiation devices
Transparent to 802.1Q VLAN tagged packets
Far End Fault function on FX port
Provide LED status display for remote TP port monitoring
Provide Loop Back Test function for installation diagnostics
Support wide range of fiber options on the FX port
Low power consumption

Operating Environment
Operating Input Voltages:	+4.75V ~ +12.6V
Power consumption:	2W max. (0.27A@+7.5V)
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-20°C to 85°C
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Warranty	2 years

BET-FES-505C 374,00 �

Thu, 04 Apr 2013 19:14:02 +0200

B&E Technologies FES-505C

Fast Ethernet Switches with one Fiber Connection

This 5-port Fast Ethernet switch series provides four 10/100 TP ports and one 100BASE-FX fiber port, each capable of transmitting or receiving information simultaneously at full wire speed to control and allocate the network bandwidth. These devices are intended for use with multimode fiber optic cabling, and operate at a wavelength of 1300nm.
Switch Features
Providing 4 10/100Mbps Fast Ethernet Switch ports and 1 100Base-FX port
Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
For the 100Base-FX fiber port, the switch can be ordered with ST or SC connectors (model FES-505T or FES-505C, respectively).
Support duplex mode selector for the 100BASE-FX fiber port.
Self learning for active MAC addresses and address aging
Store-and-forward switching to ensure only good packets are forwarded
Forwarding and filtering at full wire speed
Supports IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half-duplex mode
Comprehensive LED indicators provide quick, easy to read port and switch information

Operating Environment
DC IN Voltage:	+6.0V ~ +12.6VDC (Device DC Input)
Consumption:	DC input power consumption 3.9W @+7.5V
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-40°C to 70°C
Operating Humidity:	10% to 90% (non-condensing)

Physical Specifications
LED indicators: Power status, Per port : Speed, Link, Activity, Duplex, Collision status
Dimensions: 144 mm x 104.5 mm x 26 mm (WxDxH) (5.67 x 4.11 x 1.02 inch)

Warranty	2 years

BET-FES-505T 374,00 �

Thu, 04 Apr 2013 19:14:03 +0200

B&E Technologies FES-505T

Fast Ethernet Switches with one Fiber Connection

This 5-port Fast Ethernet switch series provides four 10/100 TP ports and one 100BASE-FX fiber port, each capable of transmitting or receiving information simultaneously at full wire speed to control and allocate the network bandwidth. These devices are intended for use with multimode fiber optic cabling, and operate at a wavelength of 1300nm.
Switch Features
Providing 4 10/100Mbps Fast Ethernet Switch ports and 1 100Base-FX port
Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
For the 100Base-FX fiber port, the switch can be ordered with ST or SC connectors (model FES-505T or FES-505C, respectively).
Support duplex mode selector for the 100BASE-FX fiber port.
Self learning for active MAC addresses and address aging
Store-and-forward switching to ensure only good packets are forwarded
Forwarding and filtering at full wire speed
Supports IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half-duplex mode
Comprehensive LED indicators provide quick, easy to read port and switch information

Operating Environment
DC IN Voltage:	+6.0V ~ +12.6VDC (Device DC Input)
Consumption:	DC input power consumption 3.9W @+7.5V
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-40°C to 70°C
Operating Humidity:	10% to 90% (non-condensing)

Physical Specifications
LED indicators: Power status, Per port : Speed, Link, Activity, Duplex, Collision status
Dimensions: 144 mm x 104.5 mm x 26 mm (WxDxH) (5.67 x 4.11 x 1.02 inch)

Warranty	2 years

BET-FES-517 239,00 �

Thu, 04 Apr 2013 19:14:03 +0200

B&E Technologies FES-517

10/100 Fast Ethernet Switch 16TX/1FX with Management

The FE-517 is the latest in our family of Fast Ethernet switches. It is a 16 port switch with a port for an optional 2km fiber optic link. Automatic cable detection on each port allows all ports to select 10Mbps or 100Mbps and MDI (crossover) or MDI-X (straightthrough) cabling. The built in management interface allows VLAN, QoS, trunking and port configuration. The CT-FE517 remains an affordable solution for your network and includes a full two year warranty.
Switch Features
10 or 100Mbps transmission rate
Full or half duplex (full duplex required for maximum transmission distances on the fiber optic port)
Switch Type: Store and Forward
Filtering Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
Forwarding Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
QoS: 4 queues per port
Filtering Address: Multicast/Broadcast/Unicast address 2K MAC addresses per unit
VLAN: up to 15 VLAN groups
Supports trunking, which allows the connection of multiple ports to other switches to increase bandwidth between switches:
-Two-port trunks: Up to 2 trunks
-Bandwidth: 400 Mbps full duplex per trunk
Management / configuration via built-in RJ-45 serial port (cable provided) and a standard terminal emulator

Operating Environment
Power:	100-240VAC, 50/60Hz,15W max
Operating Temperature:	0ºC to 50ºC
Storage Temperature:	-40ºC to 70ºC
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 95% (non-condensing)

Available Fiber Modules
FESM-517-MT Multi-mode with ST connector
FESM-517-MC Multi-mode with SC connector
FESM-517-SC Single-mode with SC connector

Physical Specifications
Rack or Table mountable chassis
LED indicator for power and for each port
Link/Act.:	Indicates the link status with a connected device as well as the connection speed between the UTP port and the connected device.
FDX/Col.:	Indicates the duplex mode and collision occurrences.
Dimensions:	430mm x 105mm x 44mm (WxDxH) (16.9" x 4.13" x 1.73")

Conforms to the Following Standards
LAN:	IEEE 802.3u 100base-TX
	IEEE 802.3u 100base-FX
	IEEE 802.3 10base-T
EMC:	EN55022 IEC1000-4-2
	EN60555-2 IEC1000-4-3
	EN60555-3 IEC1000-4-4
Products are marked as certified to the CE and FCC standards.

Installation Considerations
100FX FAST ETHERNET
Fiber Optic Cable	62.5/125µm 1300nm multimode fiber optic cable is recommended
	50/125µm, 85/125µm or 100/140µm 1300nm multimode fiber optic cable can also be used
	Modules available in multimode dual ST connectors (CT-FE052T) or multimode dual SC connectors (CT-FE052C)
	Distance from port to port: 2km (1.25 miles)

100TX FAST ETHERNET
Twisted Pair Cable	Category 5 unshielded twisted pair
	RJ-45 connector
	Distance from port to port: 100m (325 ft)

10base-T ETHERNET
Twisted Pair Cable	Category 3, 4 or 5 unshielded twisted pair
	RJ-45 connector
	Distance from port to port: 100m (325 ft)

Warranty	2 years

BET-FESM-517-MC 186,00 �

Thu, 04 Apr 2013 19:14:04 +0200

Fiber module for FES-517, multi mode, SC connector

BET-FESM-517-MT 186,00 �

Thu, 04 Apr 2013 19:14:04 +0200

Fiber module for FES-517, multi mode, ST connector

BET-FESM-517-SC 330,00 �

Thu, 04 Apr 2013 19:14:05 +0200

Fiber module for FES-517, single mode, SC connector