SWD.de/+ Manufacturer +/CommFront Ltd./CFR-SERIAL and TCP/IP SOFTWARE/CFR-ADVANCED SERIAL PROTOCOL ANALYZER products

CFR-232ANALYZER-UP3 182,75 �

Fri, 13 Apr 2018 16:26:26 +0200

232ANALYZER-UP3 Advanced Serial-Protocol Analyzer (Upgrading: Multi to Site-License)

The 232Analyzer is an award-winning, easy-to-use, advanced RS232 / RS485 / RS422 / TTL (CMOS) analyzer software that allows users to control, monitor, and analyze serial port activities in any data format (ASCII, hexadecimal, decimal, octal, or binary), and it comes with powerful features including Programmable Buttons, Automated Responses and Macros. The 232Analyzer supports all major Windows Operating Systems including Windows 10, 8, 7, Vista, and XP, both 32 and 64 bits.

License Type (Unlimited-Site-License): By upgrading from multi to unlimited-site-license, the software may now be installed on any number of computers within your organization at the same physical location, license is freely transferrable from one computer to another.

CFR-232ANALYZER-UP2 361,25 �

Fri, 13 Apr 2018 16:34:04 +0200

232ANALYZER-UP2 Advanced Serial-Protocol Analyzer (Upgrading: Single to Site-License)

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER-UP1 178,50 �

Fri, 13 Apr 2018 16:20:08 +0200

232ANALYZER-UP1 Advanced Serial-Protocol Analyzer (Upgrading: Single to Multi-License)

License Type (Company-Multi-License): By upgrading from single to multi-license, the software may now be installed on up to 5 computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER-UL 420,70 �

Fri, 13 Apr 2018 16:01:01 +0200

232ANALYZER-UL Advanced Serial-Protocol Analyzer (Unlimited-Site-License)

License Type (Unlimited-Site-License): The software may be installed on any number of computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER-SL 67,95 �

Mon, 21 Jan 2019 19:02:50 +0100

232ANALYZER-SL Advanced Serial-Protocol Analyzer (Single-License)

License Type (Single-License): The software may be installed on a single computer, license is not transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER-ML 237,95 �

Fri, 13 Apr 2018 18:13:26 +0200

232ANALYZER-ML Advanced Serial-Protocol Analyzer (Multi-License)

License Type (Company-Multi-License): The software may be installed on up to 5 computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232Analyzer-CD 12,70 �

Thu, 12 Apr 2018 14:35:21 +0200

232Analyzer-CD

larger image

232Analyzer Backup CD

€14.95

Part Number: CD-232-1

Model: CD-232-1
Shipping Weight: 0.1lbs
In Stock

CFR-232ANALYZER BUNDLE-U3 1.460,25 �

Fri, 13 Apr 2018 17:00:08 +0200

232ANALYZER BUNDLE-U3 Advanced Serial Protocol Analyzer (Bundle #U3)

The 232Analyzer Bundle #U3 (Unlimited-Site-License Bundle 3) allows users to perform RS-232 / RS-485 / RS-422 / TTL monitoring and simulation tasks. It allows users to monitor full-duplex RS-232, half-duplex RS-485, full-duplex RS-422 / 485, and full-duplex TTL communications with direction indication and timestamps.

Licensing Information: The software may be installed on any number of computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-U2 1.189,95 �

Fri, 13 Apr 2018 17:47:46 +0200

232ANALYZER BUNDLE-U2 Advanced Serial Protokoll Analyzer (Bundle # U2)

The 232Analyzer Bundle #U2 (Unlimited-Site-License Bundle 2) allows users to perform RS-232 / RS-485 / RS-422 monitoring and simulation tasks. It allows users to monitor full-duplex RS-232, half-duplex RS-485, and full-duplex RS-422 / 485 communications with direction indication and timestamps.

Licensing Information: The software may be installed on any number of computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-U1 679,95 �

Fri, 13 Apr 2018 16:53:21 +0200

232ANALYZER BUNDLE-U1 Advanced Serial Protocol Analyzer (Bundle #U1)

The 232Analyzer Bundle #U1 (Unlimited-Site-License Bundle 1) allows users to perform RS-232 monitoring and simulation tasks. It allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Licensing Information: The software may be installed on any number of computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-S3 288,95 �

Fri, 13 Apr 2018 16:47:15 +0200

232ANALYZER BUNDLE-S3 Advanced Serial Protocol Analyzer (Bundle #S3)

The 232Analyzer Bundle #S3 (Single-License Bundle 3) allows users to perform RS-232 / RS-485 / RS-422 / TTL monitoring and simulation tasks. It allows users to monitor full-duplex RS-232, half-duplex RS-485, full-duplex RS-422 / 485, and full-duplex TTL communications with direction indication and timestamps.

Licensing Information: The software may be installed on a single computer, license is not transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-S2 237,95 �

Mon, 02 Sep 2019 17:26:13 +0200

232ANALYZER BUNDLE-S2 Advanced Serial Protocol Analyzer (Bundle #S2)

The 232Analyzer Bundle #S2 (Single-License Bundle 2) allows users to perform RS-232 / RS-485 / RS-422 monitoring and simulation tasks. It allows users to monitor full-duplex RS-232, half-duplex RS-485, and full-duplex RS-422 / 485 communications with direction indication and timestamps.

Licensing Information: The software may be installed on a single computer, license is not transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-S1 127,45 �

Fri, 05 Feb 2021 17:59:37 +0100

232ANALYZER BUNDLE-S1 Advanced Serial Protocol Analyzer (Bundle #S1)

The 232Analyzer Bundle #S1 (Single-License Bundle 1) allows users to perform RS-232 monitoring and simulation tasks. It allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Licensing Information: The software may be installed on a single computer, license is not transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-M3 662,95 �

Wed, 10 Apr 2019 14:26:32 +0200

232ANALYZER BUNDLE-M3 Advanced Serial Protocol Analyzer (Bundle # M3)

The 232Analyzer Bundle #M3 (Multi-License Bundle 3) allows users to perform RS-232 / RS-485 / RS-422 / TTL monitoring and simulation tasks. It allows users to monitor full-duplex RS-232, half-duplex RS-485, full-duplex RS-422 / 485, and full-duplex TTL communications with direction indication and timestamps.

Licensing Information: The software may be installed on up to 5 computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

TTL

Monitoring
The 232Analyzer allows users to monitor full-duplex TTL communications with direction indication and timestamps. Not only is the data flowing in between the TTL devices captured, but the directions from which the data is coming are also recorded with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
TTL is widely used in electronic circuitry and devices. The 232Analyzer turns your computer into a portable analyzer for developing and debugging your TTL communication protocols. With powerful features such as the send-command pane, programmable buttons, automated responses, and macros, the 232Analyzer allows you develop your TTL communication systems in the shortest possible time!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-M2 552,45 �

Wed, 10 Apr 2019 14:29:48 +0200

232ANALYZER BUNDLE-M2 Advanced Serial Protocol Analyzer (Bundle #M2)

The 232Analyzer Bundle #M2 (Multi-License Bundle 2) allows users to perform RS-232 / RS-485 / RS-422 monitoring and simulation tasks. It allows users to monitor full-duplex RS-232, half-duplex RS-485, and full-duplex RS-422 / 485 communications with direction indication and timestamps.

Licensing Information: The software may be installed on up to 5 computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats

RS-485

Monitoring
Data from both the master and slave units on a 2-wire half-duplex RS-485 system runs on the same single-pair cable. Unlike other analyzers on the market, the 232Analyzer not only monitors the data owing in between the RS-485 devices, but also captures the directions from which the data is coming, and with timestamps in milliseconds. This is very important because it allows users to know exactly when and what commands the master and slaves are sending and responding.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
With powerful tools such as the protocol checksum calculator, send-command pane, programmable buttons, automated responses, and macros, simulating / controlling RS-485 devices and networks has never been easier. The 232Analyzer is capable of simulating both the RS-485 master and slave units. Not limited to the RS-485 devices alone, the 232Analyzer helps you analyze and develop the entire RS-485 communication system!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

RS-422

Monitoring
The 4-wire RS-422 / RS-485 systems run on two twisted-pair cables, the 232Analyzer is not only capable of capturing data owing simultaneously in between the RS-422 / RS-485 devices, but also records the directions that the data is coming from, with timestamps.

Key Features:
Data with direction indication
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
A typical RS-422 / RS-485 network consists of one master and many slave units, whereas the 232Analyzer can perform both tasks – as a master or as a slave unit. With powerful features such as programmable buttons, automated responses, and macros, the 232Analyzer allows you to control and simulate the master or addressable slave units in the system. This is very helpful not only for debugging your RS-422 / RS-485 devices but also in building your RS-422 / RS-485 network!

Key Features:
Advanced and powerful data simulation
Customizable color-coded logging window
Supports all data formats

CFR-232ANALYZER BUNDLE-M1 339,95 �

Fri, 29 Nov 2019 12:47:25 +0100

232ANALYZER BUNDLE-M1 Erweiterter serieller Protokollanalysator (Bundle # M1)

The 232Analyzer Bundle #M1 (Multi-License Bundle 1) allows users to perform RS-232 monitoring and simulation tasks. It allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Licensing Information: The software may be installed on up to 5 computers within your organization at the same physical location, license is freely transferrable from one computer to another.

RS-232

Monitoring
The 232Analyzer allows users to monitor full-duplex RS-232 communications with direction indication and timestamps. Not only is the data from both directions captured; the RS-232’s signals (handshake line states) are also recorded in the logging window.

Key Features:
Data + full signal monitoring
Timestamps in milliseconds
Long-hour recording
Customizable color-coded logging window
Supports all data formats
Simulation
The 232Analyzer comes with many useful features, such as virtual LEDs for monitoring / controlling handshake line states, programmable automated responses for responding to incoming commands or line state changes, and macros for simulating a sophisticated communication scenario – at the click of a button!

Key Features:
Advanced data + full signal simulation
Customizable color-coded logging window
Supports all data formats