SWD.de/+ Manufacturer +/+ + Additional manufacturers + +/Corman Technologies Ltd./CorNet 100base-TX Ethernet Adapters products

COR-CT-FE002 48,00 �

Thu, 04 Apr 2013 19:24:29 +0200

CorNet 100TX Fast-Ethernet-Boot ROM(CT-FE120)

COR-CT-FE003 53,00 �

Thu, 04 Apr 2013 19:24:29 +0200

CorNet CT-FE003 100FX Fast-Ethernet BOOT-ROM QNX4 for FE130C/T, see also BET-FE-003

COR-CT-FE004 48,00 �

Thu, 04 Apr 2013 19:24:29 +0200

CorNet 100TX Fast-Ethernet-Boot ROM(CT-FE122)

COR-CT-FE120 116,00 �

Wed, 01 Jul 2020 01:36:14 +0200

CT-FE120

CorNet 100TX Fast Ethernet Adapter PCI

Supports:
100Mbps 100base-TX Fast Ethernet (IEEE 802.3u)
10Mbps 10base-T Ethernet (IEEE 802.3)
32 bit bus mastering
Supports boot ROM
Fully software configurable
Drivers for QNX, Netware, Windows, etc.
Diagnostic link LEDs
Auto-negotiation for 100Mbps or 10Mbps operation on single RJ-45 network connector
+5VDC, 0.5A typical

Uses 2 pairs of unshielded twisted pair cabling (category 5 for 100base-TX Fast Ethernet or category 3 for 10base-T Ethernet)

This 100Mbit extension to the Ethernet standard allows significantly increased network throughput over 2 pairs of category 5 twisted pair wiring. The CorNet Fast Ethernet products are guaranteed to work with QNX.

DESCRIPTION

This is a 32-bit Bus Mastering Fast Ethernet Adapter for the PCI bus. It supports both 100Mbps Fast Ethernet and 10Mbps Ethernet connections to allow a gradual upgrade to a network. If appropriate cabling is present, simply attach the cable to a 100TX Hub on the network. The adapter will switch automatically to whatever network it is attached. It supports jumperless Plug and Play configuration.

OPERATING ENVIRONMENT

Power: +5V DC @ 0.5A max
Operating Temperature: 0 to 40�C
Storage Temperature: 40 to 70�C
Operating Humidity: 10% to 90% (non-condensing)
Storage Humidity: 5% to 90% (non-condensing)

LAN INTERFACE

32-bit bus mastering PCI 2.0 bus
100 or 10Mbps transmission rate
I/0 mapped (set by PCI BIOS)
Interrupts (set by PCI BIOS)
ROM: Optional Boot ROM
PnP jumperless configuration by PCI bus
Autodetect 100 or 10 Mbps network
Drivers for most popular networking operating systems

PHYSICAL SPECIFICATIONS

PCB mounted low profile RJ45 connector
LED indicator for link, green - indicates link is operating normally, yellow - indicates node activity
Standard PCI adapter: 125mmx80mm (4.92"x3.15")

WARRANTY

5 years

INSTALLATION CONSIDERATIONS

ETHERNET

Twisted Pair Cable Type

Category 3 or better unshielded twisted pair

Twisted Pair Distances

From node to hub: 100m (325 ft)
Total network span: 500m (1320 ft)
Based on recommended maximum of 5 links and 4 repeaters between nodes.

FAST ETHERNET

Twisted Pair Cable type

Category 3 or better unshielded twisted pair

Twisted Pair Distances

From node to hub: 100m (325 ft)
Total network span: 205m (670 ft)

CONFORMS TO THE FOLLOWING STANDARDS

100TX: IEEE 802.3u 100base-TX
Ethernet: IEEE 802.3 10base-T
EMC:

EN55022:1994, CISPR 22 Class A
EN50082-1

IEC 801-2, 8KV Air
IEC 801-3, 3V/m
IEC 801-4, 0.5KV Signal line, 1KV Power line

European CE compliance

COR-CT-FE122 114,00 �

Thu, 04 Apr 2013 19:24:29 +0200

CT-FE122

CorNet 10/100TX Fast Ethernet Adapter PCI

Supports:
100Mbps 100base-TX Fast Ethernet (IEEE 802.3u)
10Mbps 10base-T Ethernet (IEEE 802.3)
32 bit bus mastering
Supports boot ROM
Fully software configurable
Drivers for QNX, Netware, Windows, etc.
Diagnostic link LEDs
Auto-negotiation for 100Mbps or 10Mbps operation on single RJ-45 network connector
+3.3VDC, 0.378A max.
Uses 2 pairs of unshielded twisted pair cabling (category 5 for 100base-TX Fast Ethernet or category 3 for 10base-T Ethernet)

DESCRIPTION

This is a 32-bit Bus Mastering Fast Ethernet Adapter for the PCI bus. It supports both 100Mbps Fast Ethernet and 10Mbps Ethernet connections to allow a gradual upgrade to a network. If appropriate cabling is present, simply attach the cable to a 100TX Hub or switch on the network. The adapter will switch automatically to the highest speed supported by the hub or switch. It supports jumperless Plug and Play configuration and Wake On LAN for ACPI compliant motherboards and operating systems.

OPERATING ENVIRONMENT

Power: +3.3V DC @ 0.378A max
Operating Temperature: 0 to 40�C
Storage Temperature: -40 to 70�C
Operating Humidity: 10% to 90% (non-condensing)
Storage Humidity: 5% to 90% (non-condensing)

LAN INTERFACE

32-bit bus mastering PCI 2.1 bus
100 or 10Mbps transmission rate
I/0 mapped (set by PCI BIOS)
Interrupts (set by PCI BIOS)
ROM: Optional Boot ROM
PnP jumperless configuration by PCI bus BIOS
Wake On LAN for ACPI compliant equipment and operating system
Autodetect 100 or 10 Mbps network
Drivers for most popular networking operating systems

PHYSICAL SPECIFICATIONS

PCB mounted low profile RJ45 connector
LED indicator for link, Yellow or green - indicates speed (10/100), 2nd Green - indicates node activity
Standard PCI adapter: 59mmx130mm (2.32"x5.12")

WARRANTY

2 years

INSTALLATION CONSIDERATIONS

ETHERNET

Twisted Pair Cable Type

Category 3 or better unshielded twisted pair
Distances From node to hub: 100m (325 ft)
Total network span: 500m (1320 ft)
Based on recommended maximum of 5 links and 4 repeaters between nodes.

FAST ETHERNET

Twisted Pair Cable type

Category 5 unshielded twisted pair
Distances from node to hub: 100m (325 ft)
Total network span: 205m (670 ft)

WAKE ON LAN

3-pin Wake On LAN connector with cable, ACPI compliant, Magic packet compatible
Adapter to Motherboard cable included

CONFORMS TO THE FOLLOWING STANDARDS

100TX: IEEE 802.3u 100base-TX
Ethernet: IEEE 802.3 10base-T
EMC:
- EN50081-1:1992, CISPR 22 Class A
  - EN55022/1998
  - EN61000-3-2/1995
  - EN61000-3-3/1995
- EN55024:1998
- IEC61000-4-2/1995
  - IEC 61000-4-2/1995
  - IEC 61000-4-3/1995
  - IEC 61000-4-4/1995
  - IEC 61000-4-5/1995
  - IEC 61000-4-6/1996
  - IEC 61000-4-8/1993
  - IEC 61000-4-11/1994

Products are marked as certified to the CE standards

COR-CT-FE130C 354,00 �

Thu, 04 Apr 2013 19:24:29 +0200

CT-Fe130C

CorNet 100FX Fast Ethernet Adapter PCI SC

Multimode SC 1300nm fiber connector
Supports 32-bit bus master operation
Low CPU utilization
Supports boot ROM
Supports full duplex operation for up to 200 Mbps data transfer rate
Also available in 1300nm single mode SC

COR-CT-FE130T 354,00 �

Thu, 04 Apr 2013 19:24:29 +0200

CT-Fe130T

CorNet 100FX Fast Ethernet Adapter PCI ST

Multimode ST 1300nm fiber connector
Supports 32-bit bus master operation
Low CPU utilization
Supports boot ROM
Supports full duplex operation for up to 200 Mbps data transfer rate

COR-CT-VG001 30,00 �

Thu, 04 Apr 2013 19:24:30 +0200

CorNet 100VG-AnyLAN BOOT ROM ISA QNX4

COR-CT-VG002 30,00 �

Thu, 04 Apr 2013 19:24:30 +0200

CorNet 100VG-AnyLAN BOOT ROM PCI QNX4

COR-CT-VG101 100,00 �

Thu, 04 Apr 2013 19:24:30 +0200

CorNet 100VG-AnyLAN Network card ISA

COR-CT-VG112 150,00 �

Thu, 04 Apr 2013 19:24:30 +0200

CorNet 100VG-AnyLAN Network card PCI