SWD.de/+ Manufacturer +/Danpex Corp./DAN-Fast Ethernet Fiber Adapters products

DAN-AFC1500SC 144,00 �

Thu, 04 Apr 2013 19:14:07 +0200

32-Bit CardBus 100Base-FX Multi-Mode Network Card

DEVICE DRIVERS

Microsoft Windows 98/98SE/ME/2000/XP
Novell NetWare Client DOS ODI
Linus kernel 2.4 & 2.6 (Redhat 9.x & Fedora Core 2)
[ NO TECHNICAL SUPPORT PROVIDED! ]
Card Enabler

TECHNICAL SPECIFICATIONS

Model: AFC1500SC / AFC1500ST / AFC1500MT
Standards: IEEE 802.3u 100Bas-FX, PCMCIA Type II CardBus PC Card
Bus Architecture: 32-Bit CardBus
Connector:
AFC1500SC — Multi-Mode Duplex-SC, 1310nm
AFC1500ST — Multi-Mode Duplex-ST, 1310nm
AFC1500MT — Multi-Mode MT-RJ, 1310nm
dBm [ Min TX, Max TX, Sensitivity, Power Budget ]:
AFC1500SC [ -19dBm, -14dBm, -30dBm, 11dB ]
AFC1500ST [ -20dBm, -14dBm, -32dBm, 12dB ]
AFC1500MT [ n/a, n/a, n/a, n/a ]
Data Transfer Rate: 100Mbps
Duplex Mode: Full
Cable: 50/125, 62.5/125, 100/140µm Multi-Mode fiber
Maximum Cable Distance: 2 km
LEDs: Link, Activity
Power Requirement: 0.5A@+3.3V, 0.5A@+5V
Operating Temperature: 0° to 50° C
Humidity: 5% to 90%
Dimension: 16 x 54 x 140mm (H x W x D)
Safety: FCC Class B, CE Mark Approval, RoHS Compliance

DAN-AFC1500ST 144,00 �

Thu, 04 Apr 2013 19:14:07 +0200

32-bit CardBus 100Base-FX Multi-Mode ST Ethernet network adapter 100Mbps

DAN-AFP1150SC 108,00 �

Thu, 04 Apr 2013 19:14:07 +0200

32-Bit PCI 100Base-FX (Single-/Multi-Mode) Low-/Standard-Profile Network Card

DEVICE DRIVERS

Microsoft Windows 95/95OSR2/98/98SE/ME/NT4/2000/XP
Novell NetWare Server 3.12/4.0/4.11/4.12/5.0/5.1/6.0
Novell NetWare DOS ODI Client
Linux kernel v2.2.x & 2.4.x ONLY (No technical support provided)

TECHNICAL SPECIFICATIONS

Model:
AFP1150SC / AFP1150ST / AFP1150MT
AFP1150SC20 / AFP1150SC60 / AFP1150DB3.20 / AFP1150DB5.20
AFP1150LSC / AFP1150LST / AFP1150LMT
AFP1150LSC20 / AFP1150LSC60 / AFP1150LDB3.20 / AFP1150LDB5.20
Standards: IEEE 802.3u 100Base-FX
Bus Architecture: 32-Bit PCI Bus Master
Connector:
AFP1150SC/LSC — Multi-Mode Duplex-SC, 1310nm
AFP1150ST/LST — Multi-Mode Duplex-ST, 1310nm
AFP1150MT/LMT — Multi-Mode MT-RJ, 1310nm
AFP1150SC20/LSC20 — Single-Mode Duplex-SC/20km,
AFP1150SC60/LSC60 — Single-Mode Duplex-SC/60km,
AFP1150DB3.20/LDB3.20 — Single-Mode Simplex-SC/20km, TX 1310nm
AFP1150DB5.20/LDB5.20 — Single-Mode Simplex-SC/20km, TX 1550nm
Supports PXE ROM (P/N# PXEROM1X50, which comes with MBA Utility)
Data Transfer Rate: 100Mbps
Duplex Mode: Full or Half
Cable:
50/125, 62.5/125, 100/140µm Multi-Mode fiber, up to 2km
9/125µm Single-Mode fiber, from 20 to 60km (model dependent)
LEDs: LNK/ACT (Link/Activity), FDX (Full-Duplex)
Power Requirement: 1.0A@+5V
Operating Temperature: 0° to 50° C
Humidity: 5% to 90%
Dimension: 120 x 56mm (H x W)
Bracket:
AFP1150SC/ST/MT/SC20/SC60/DB3.20/DB5.20 — Standard Profile bracket
AFP1150LSC/LST/LMT/LSC20/LSC60/LDB3.20/LDB5.20 — Low Profile bracket
Safety: FCC Class A, CE Mark Approval, RoHS Compliance

DAN-AFP1150ST 108,00 �

Thu, 04 Apr 2013 19:14:07 +0200

Fast Ethernet PCI 32-Bit 100Mbps Fiber multimode ST

DAN-AFP2100LSC 114,00 �

Thu, 04 Apr 2013 19:14:07 +0200

Low Profile Fast Ethernet PCI 32-Bit 10/100Mbps RJ-45 & 10Mbps Fiber multimode SC

DAN-AFP2100LST 114,00 �

Thu, 04 Apr 2013 19:14:07 +0200

Low Profile Fast Ethernet PCI 32-Bit 10/100Mbps RJ-45 & 10Mbps Fiber multimode ST

DAN-AFP2100SC 114,00 �

Thu, 04 Apr 2013 19:14:07 +0200

32-Bit PCI 10/100-TP & 100-FX Dual-Media Low-/Standard-Profile Network Card

DEVICE DRIVERS

Microsoft Windows 95OSR2/98/98SE/ME/NT4.0/2000/XP
Novell NetWare Server 3.12/4.0/4.0/4.1x/5.0
Novell NetWare DOS ODI Client
Packet Driver
Linux (No technical support provided)

TECHNICAL SPECIFICATIONS

Model:
AFP2100SC / AFP2100ST / AFP2100MT
AFP2100SC20 / AFP2100SC60 / AFP2100BD3.20 / AFP2100BD5.20
AFP2100LSC / AFP2100LST / AFP2100LMT
AFP2100LSC20 / AFP2100LSC60 / AFP2100LBD3.20 / AFP2100LBD5.20
Standards: IEEE 802.3u 100Base-FX/TX, IEEE 802.3 10Base-T
Bus Architecture: 32-Bit PCI
Connectors:
AFP2100SC/LSC — Multi-Mode Duplex-SC, 1310nm & RJ-45
AFP2100ST/LST — Multi-Mode Duplex-ST, 1310nm & RJ-45
AFP2100MT/LMT — Multi-Mode MT-RJ, 1310nm & RJ-45
AFP2100SC20/LSC20 — Single-Mode Duplex-SC/20km, & RJ-45
AFP2100SC60/LSC60 — Single-Mode Duplex-SC/60km, & RJ-45
AFP2100BD3.20/LBD3.20 — Single-Mode Simplex-SC/20km, TX 1310nm & RJ-45
AFP2100BD5.20/LBD5.20 — Single-Mode Simplex-SC/20km, TX 1550nm & RJ-45
* Note: Fiber port and TP port CANNOT BE USED SIMULTANEOUSLY, i.e. use one connector at a time. Best way to switch between them is to power down your system first, then select the desired connector.
Data Transfer Rate: 100Mbps for FX, 10/100Mbps (auto-negotiation) for TX
Duplex Mode:
Full or Half (device driver selectable) for FX
Full or Half (auto-sense) for TX
Cable / Max Distance:
50/125, 62.5/125, 100/140µm Multi-Mode fiber, up to 2km
9/125µm Single-Mode fiber, from 20 to 60km (model dependent)
Category 5 or up UTP cable for 100Mbps, up to 100m
Category 3 or up UTP cable for 10Mbps, up to 100m
LEDs: LinK/ACT, FDX
Power Requirement: 1.0A@+5V
Operating Temperature: 0° to 50° C
Humidity: 5% to 90%
Dimension: 62 x 147mm (H x W)
Bracket:
AFP2100SC/ST/MT/SC20/SC60/BD3.20/BD5.20 — Standard Profile bracket
AFP2100LSC/LST/LMT/LSC20/LSC60/LBD3.20/LBD5.20 — Low Profile bracket
Safety: FCC Class A, CE Mark Approval, RoHS Compliance

DAN-AFP2100ST 114,00 �

Thu, 04 Apr 2013 19:14:07 +0200

Fast Ethernet PCI 32-Bit 10/100Mbps RJ-45 & 10Mbps Fiber multimode ST

DAN-EN-2900SC 200,00 �

Thu, 04 Apr 2013 19:14:09 +0200

Ethernet Fiber Card, SC Model No.: EN-2900SC

EN-2900SC 32-bit PCI Bus Ethernet LAN cards, are in full compliance with PCI Revision 2.x and IEEE 802.3 Ethernet 10Base-FL standards.

FEATURES
EN-2900SC 32-bit PCI Bus Ethernet LAN cards, are in full compliance with PCI Revision 2.x and IEEE 802.3 Ethernet 10Base-FL standards. Utilizing Realtek high-throughput PCI bus single-chip Ethernet controller, EN-2900SC features PnP (Plug and Play) auto-configuration function and driver fully compatible with Novell NE2000. With high-throughput PCI bus and on-board 8K x 8 remote Boot ROM built-in, EN-2900SC is perfect for both server and diskless workstation configuration. EN-2900SC is equipped with SC connectors(Tx, Rx). Campus network can be established via using EN-2900SC on the server or workstation for 10Mbps data rate with multimode fiber optic cable. The node to node distance can be up to 2Km by applying EN-2900SC. LED indicators are available for network monitoring and diagnosis.

Item	SPECIFICATIONS
Standards	IEEE 802.3 Ethernet 10Base-FL/FOIRL
Connector	SC(multi-mode) connectors Tx/Rx
Cable	Fiber : 50/125, 62.5/125, 100/140�m multi-mode
Maximum Wire Length	Node to Node : 2Km Node to Hub : 2Km
Data Transfer Mode/Speed	PCI bus 10Mbps speed Half duplex mode
Diagnostic LEDs	Link and Activity
NOS Supported	NetWare, IntraNetWare, Windows NT, Windows 95,Windows for Workgroups, IBM LAN Server,Lantastic/AI, SCO Unix
Power Requirement	2.0A @ + 5V
Ambient Temperature	0�C to 50�C
Humidity	5% to 90%
Dimensions	123mm(L) x 61mm(H)
Apporval	FCC Part 15 Class A & CE

DAN-EN-2900ST 200,00 �

Thu, 04 Apr 2013 19:14:10 +0200

Ethernet Fiber Card, ST Model No.: EN-2900ST

EN-2900ST 32-bit PCI Bus Ethernet LAN cards, are in full compliance with PCI Revision 2.x and IEEE 802.3 Ethernet 10Base-FL standards.

FEATURES
EN-2900ST 32-bit PCI Bus Ethernet LAN cards, are in full compliance with PCI Revision 2.x and IEEE 802.3 Ethernet 10Base-FL standards. Utilizing Realtek high-throughput PCI bus single-chip Ethernet controller, EN-2900SC features PnP (Plug and Play) auto-configuration function and driver fully compatible with Novell NE2000. With high-throughput PCI bus and on-board 8K x 8 remote Boot ROM built-in, EN-2900ST is perfect for both server and diskless workstation configuration. EN-2900ST is equipped with ST connectors(Tx, Rx). Campus network can be established via using EN-2900ST on the server or workstation for 10Mbps data rate with multimode fiber optic cable. The node to node distance can be up to 2Km by applying EN-2900ST. LED indicators are available for network monitoring and diagnosis

Item	SPECIFICATIONS
Standards	IEEE 802.3 Ethernet 10Base-FL/FOIRL
Connector	ST(multi-mode) connectors Tx/Rx
Cable	Fiber : 50/125, 62.5/125, 100/140�m multi-mode
Maximum Wire Length	Node to Node : 2Km Node to Hub : 2Km
Data Transfer Mode/Speed	PCI bus 10Mbps speed Half duplex mode
Diagnostic LEDs	Link and Activity
NOS Supported	NetWare, IntraNetWare, Windows NT, Windows 95, Windows for Workgroups, IBM LAN Server, Lantastic/AI, SCO Unix
Power Requirement	2.0A @ + 5V
Ambient Temperature	0�C to 50�C
Humidity	5% to 90%
Dimensions	123mm(L) x 61mm(H)
Apporval	FCC Part 15 Class A & CE

DAN-FE-1000SC 300,00 �

Thu, 04 Apr 2013 19:14:10 +0200

100Mbps ISA 16-Bit Fast Ethernet Adapter for Fiber SC, full duplex

DAN-FE-1000ST 300,00 �

Thu, 04 Apr 2013 19:14:10 +0200

100Mbps ISA 16 Bit Fast Ethernet Adapter Fiber ST, full duplex

DAN-FE-1430SC 200,00 �

Thu, 04 Apr 2013 19:14:10 +0200

Fast Ethernet Fiber Card, SC Model No.: FE-1430SC

FE-1430SC is affordable and high performance 32-bit Fast Ethernet 100Base-FX adapters for network demanding high bandwidth and flexibility.(SC connector)

FEATURES
FE-1430SC is affordable and high performance 32-bit Fast Ethernet 100Base-FX adapters for network demanding high bandwidth and flexibility. It is in full compaliance with PCI Revision 2.x, IEEE 802.3u 100Base-FX standard. FE-1430ST/SC/ mode. Designed with INTEL Fast Ethernet LAN controller, FE-1430 throughput while maintaining low CPU utilization. FE-1430SC is with ST/SC connector with multi-mode fiber optic cable. The node to node network distance can be up to 2 Km in full-duplex operation. Diagnostic LEDs are easily visible for maintenance purpose. Extensive Networking Operating System (NOS) drivers are available - NetWare, Windows NT, Windows 95, Windows for Workgroups, Microsoft LAN Manager, OS/2 warp, IBM LAN Server, and SCO Unix.

Item	SPECIFICATIONS
Standard	IEEE 802.3u Fast Ethernet 100Base-FX
Connector	FE-1430ST: ST(multi-mode) connectors Tx/Rx FE-1430SC: SC(multi-mode) connectors Tx/Rx FE-1430MT: MTRJ(multi-mode) connectors FE-1430VF: VF-45(multi-mode) connectors
Cable	Fiber: 50/125, 62.5/125, 100/140�m multi-mode
Maximum Wire Length Half Duplex Full Duplex	Node to Node: 412 meters Node to Switching Hub: 412 meters Node to Node: 2000 meters Node to Switching Hub: 2000 meters
Data Transfer Mode/Speed	PCI bus 100Mbps speed Half or full-duplex mode
Diagnostic LEDs	Link, Activity, Collision and Full-duplex
NOS Supported	NetWare, IntraNetWare, Windows NT, Windows 95, Windows for Workgroups, Microsoft LAN Manager, OS/2 Warp, IBM LAN Server, SCO U
Power Requirements	2.0A @ + 5V
Ambient Temperature	0�C to 50�C
Humidity	5% to 90%
Dimensions	123mm(L) x 61mm(H)

DAN-FE-1430ST 200,00 �

Thu, 04 Apr 2013 19:14:10 +0200

Fast Ethernet Fiber Card, ST Model No.: FE-1430ST

FE-1430ST is affordable and high performance 32-bit Fast Ethernet 100Base-FX adapters for network demanding high bandwidth and flexibility.( ST connector )

FEATURES
FE-1430ST is affordable and high performance 32-bit Fast Ethernet 100Base-FX adapters for network demanding high bandwidth and flexibility. It is in full compaliance with PCI Revision 2.x, IEEE 802.3u 100Base-FX standard. FE-1430ST designed with INTEL Fast Ethernet LAN controller, FE-1430 throughput while maintaining low CPU utilization. FE-1430ST is with ST connector with multi-mode fiber optic cable. The node to node network distance can be up to 2 Km in full-duplex operation. Diagnostic LEDs are easily visible for maintenance purpose. Extensive Networking Operating System (NOS) drivers are available - NetWare, Windows NT, Windows 95, Windows for Workgroups, Microsoft LAN Manager, OS/2 warp, IBM LAN Server, and SCO Unix.

Item	SPECIFICATIONS
Standard	IEEE 802.3u Fast Ethernet 100Base-FX
Connector	FE-1430ST: ST(multi-mode) connectors Tx/Rx FE-1430SC: SC(multi-mode) connectors Tx/Rx FE-1430MT: MTRJ(multi-mode) connectors FE-1430VF: VF-45(multi-mode) connectors
Cable	Fiber: 50/125, 62.5/125, 100/140�m multi-mode
Maximum Wire Length Half Duplex Full Duplex	Node to Node: 412 meters Node to Switching Hub: 412 meters Node to Node: 2000 meters Node to Switching Hub: 2000 meters
Data Transfer Mode/Speed	PCI bus 100Mbps speed Half or full-duplex mode
Diagnostic LEDs	Link, Activity, Collision and Full-duplex
NOS Supported	NetWare, IntraNetWare, Windows NT, Windows 95, Windows for Workgroups, Microsoft LAN Manager, OS/2 Warp, IBM LAN Server, SCO U
Power Requirement	2.0A @ + 5V
Ambient Temperature	0�C to 50�C
Humidity	5% to 90%
Dimensions	123mm(L) x 61mm(H)