SWD.de/+ Manufacturer +/Danpex Corp./DAN-Media Converter Stand alone unit products

DAN-CEM0100 90,00 �

Thu, 04 Apr 2013 19:14:08 +0200

10Base-2 BNC <> 10Base-T RJ-45 Ethernet Converter

OVERVIEW

CEM0100 is a media translator that translates the signals between Ethernet 10Base-T UTP medium and thin Ethernet 10Base-2 coaxial medium. Collision data is also translated to ensure 100% collision detection in any combination of network segments or devices. CEM0100 is an ideal solution to provide the connection between 10Base-T and Thin-Net backbone where BNC port is not available on the existing 10Base-T concentrator. Instead of replacing the 10Base-T concentrator with the one equipped with BNC port, CEM0100 can provide the solution at very low cost.

With the size similar to a match box, CEM0100 can easily be installed in the limited space environment. 4 diagnostic LED indicators provide clear and quick diagnosis if any network problem is encountered. CEM0100 comes with an external AC power adapter.

DEVICE DRIVERS SUPPORTED

Filename: n/a
Included Drivers:n/a

TECHNICAL SPECIFICATIONS

Model:CEM0100
PC Supported:n/a
Standards:IEEE 802.3 Ethernet 10Base-T and 10Base-2
Network Connector:
UTP RJ-45 jack (MPR/DTE Switch Selectable), 1 BNC connector
( Both RJ-45 jack and BNC connector are located on the SAME end. Please refer to above picture.)
LAN Controller:n/a
Data Transfer Rate: 10Mbps
Duplex:Half
Cable:Unshielded Twisted-pair Category 3/4/5, RG-58A/U coaxial cable
Cable Limitation:

UTP (max.) : 100m (328ft)

Coaxial (max. per segment) : 185m (607ft)
LEDs: POWER, BNC ACT, TP ACT, and COL
Power Requirement: 1A@+5V DC
External Power Adapter:100-240V AC, 50/60Hz, 0.5/0.25A
Ambient Temperature: 0� to 50� C
Humidity: 5% to 90%
Dimensions:26.2 x 70.3 x 94 mm (H x W x D)
EMI Rating: FCC Part 15 Class A and CE Mark

DAN-CEM1500 117,00 �

Tue, 25 Feb 2014 19:09:15 +0100

10Base-FL ST Multi-Mode <> 10Base-T RJ-45 Ethernet Converter

OVERVIEW

CEM1500 is an IEEE 802.3 Ethernet media converter between 10Base-FL and 10Base-T. It is designed to address the situation where only 10Base-T port is available but 10Base-FL connectivity via ST connectors is required. Such high performance media converter can repeat and convert data signal running 10Base-FL cable up to 2 km.

The CEM1500 is equipped with two fiber optic ST connectors (one for transmitting - Tx and one for receiving - Rx) and one RJ-45 jack (switch selectable for MPR or DTE.) Four LED indicators are built-in for easy diagnostic and monitoring the status of Power, TP Link/Activity, Fiber Link/Activity, and Collision.

DEVICE DRIVERS SUPPORTED

Filename: n/a
Included Drivers:n/a

TECHNICAL SPECIFICATIONS

Model #	Min TX Output	Max TX Output	Sensitivity	Power Budget
CEM1500	-16	-10	-29,5	13,5

Model:CEM1500
PC Supported:n/a
Standards:IEEE 802.3 Ethernet 10Base-FL and 10Base-T
Network Connector:
850nm ST Tx/Rx Multi-Mode Connectors and RJ-45 Jack (MPR/DTE Slide-Switch Selectable)
(Both RJ-45 jack and ST connectors are located on the SAME end. Please refer to the picture shown above
dBm
Data Transfer Rate: 10Mbps
Duplex:Half
Cable:
Fiber 50/125, 62.5/125µm multi-mode, and Category 3/4/5 Unshielded Twisted-pair
Cable Limitation:

Fiber optic cable : 2 km

UTP cable :100 m
LEDs: Fiber Link/ACT, TP Link/ACT, Power, and Collision
Power Requirement: 1A@+5V DC
External Power Adapter:100-240VAC, 50/60Hz, 0.5/0.25A
Ambient Temperature: 0° to 50° C
Humidity: 5% to 90%
Dimensions:26.2 x 70.3 x 94 mm (H x W x D)
EMI Rating: FCC Part 15 Class A and CE Mark

DAN-CFM3450BD3.20 444,00 �

Thu, 04 Apr 2013 19:14:08 +0200

CFM3450BD5.20, A pair WDM Fiber Optics Converter 100Base FX SC SM 20km <> 10/100Mbps RJ-45

DAN-CFM3450BD3.60 630,00 �

Thu, 04 Apr 2013 19:14:08 +0200

CFM3450BD5.60, A pair WDM Fiber Optics Converter 100Base FX SC SM 60km <> 10/100Mbps RJ-45

DAN-CFM3450SC 83,00 �

Thu, 04 Apr 2013 19:14:08 +0200

Fast Ethernet Media Converter 10/100Base RJ-45 <> 100Base FX SC MM 2km USB LFP feature

DAN-CFM3450SC20 179,00 �

Thu, 04 Apr 2013 19:14:08 +0200

Fast Ethernet Media Converter 10/100Base RJ-45 <> 100Base FX SC MM 20km USB LFP feature

DAN-CFM3450SC40 203,00 �

Thu, 04 Apr 2013 19:14:08 +0200

Fast Ethernet Media Converter 10/100Base RJ-45 <> 100Base FX SC MM 40km USB LFP feature

DAN-CFM3450SC60 999,99 �

Thu, 04 Apr 2013 19:14:08 +0200

Fast Ethernet Media Converter 10/100Base RJ-45 <> 100Base FX SC MM 40km USB LFP feature, please call

DAN-CFM3450ST 83,00 �

Thu, 04 Apr 2013 19:14:08 +0200

Fast Ethernet Media Converter 10/100Base RJ-45 <> 100Base FX ST MM 2km USB LFP feature

DAN-CFOC2550C20 312,00 �

Thu, 04 Apr 2013 19:14:08 +0200

* DISCONTINUED * 100Base-FX To 10/100Base-TX Palm-size Media Converter

ADDITIONAL FEATURE

Link Fault Pass-Through (LFP)
LFP. Link status on one port is propagated to the other port to notice the remote node. The LFP function works only when both converters own this capability. Furthermore, both converters should be supplied by the SAME manufacturer. The connection coming from different manufacturers or non-LFP converters may cease this function.

TECHNICAL SPECIFICATIONS

Model: CFM1600SC / CFM1600ST
Standards: IEEE 802.3u 100Base-FX/TX, IEEE 802.3 10Base-T
Connectors:
CFM1600SC — 1310nm Multi-Mode Duplex-SC & RJ-45 (auto MDI/MDI-X)
CFM1600ST — 1310nm Multi-Mode Duplex-ST & RJ-45 (auto MDI/MDI-X)
dBm [ Min TX, Max TX, Sensitivity, Power Budget ]:
CFM1600SC [ -20dBm, -14dBm, -31dBm, 11dB ]
CFM1600ST [ -20dBm, -14dBm. -31dBm, 11dB ]
Data Transfer Rate:
100Mbsp for FX
10 or 100Mbps (auto-negotiation) for TP
Duplex Mode: Full for FX, Full or Half (auto-sense) for TP
Cables / Max Distance:
Category 5 or above UTP, up to 100m
50/125, 62.5/125, 100/140µm Multi-Mode fiber, up to 2km
LEDs: TP LINK/ACT, FX LINK/ACT
Power Requirement: 1A@+3.3V DC from AC-DC Adapter
Operating Temperature: 0° to 40° C
Humidity: 5% to 90%
Dimension: 25 x 61 x 57.5mm (H x W x D)
EMI Rating: FCC Class A, CE Mark Approval

DAN-CFOC2550C40 354,00 �

Thu, 04 Apr 2013 19:14:08 +0200

SONET OC-3 Converter Standallone, Multi Mode SC<>Single Mode Duplex-SC 40km

DAN-CFOC2550C60 999,99 �

Thu, 04 Apr 2013 19:14:08 +0200

SONET OC-3 Converter Standallone, Multi Mode SC<>Single Mode Duplex-SC 60km, please ask for prices

DAN-CGM3700SC 186,00 �

Thu, 04 Apr 2013 19:14:08 +0200

1000Base-SX/LX To 1000Base-T Media Converter

TECHNICAL SPECIFICATIONS

Model:
CGM3700SC
CGM3700SC10 / CGM3700SC40 / CGM3700SC70
CGM3700BD3.20 / CGM3700BD5.20
Standards: IEEE 802.3z 1000Base-SX/LX, 802.3ab 1000Base-T
Connectors: RJ-45 &
850nm Multi-Mode Duplex-SC for CGM3700SC
1310nm Single-Mode/10km Duplex-SC for CGM3700SC10
1550nm Single-Mode/40km Duplex-SC for CGM3700SC40
1550nm Single-Mode/70km Duplex-SC for CGM3700SC70
1310nm (TX) Single-Mode/20km Simplex-SC for CGM3700BD3.20
1550nm (TX) Single-Mode/20km Simplex-SC for CGM3700BD5.20
dBm [ Min TX, Max TX, Sensitivity, Power Budget ]:
CGM3700SC [ -10dBm, -4dBm, -17dBm, 7dB ]
CGM3700SC10 [ -9.5dBm, -3dBm, -21dBm, 11.5dB ]
CGM3700SC40 [ -6dBm, 0dBm, -23dBm, 17dB ]
CGM3700SC70 [ 0dBm, 5dBm, -23dBm, 23dB ]
CGM3700BD3.20 [ -8dBm, -3dBm, -21dBm, 13dB ]
CGM3700BD5.20 [ -8dBm, -3dBm, -21dBm, 13dB ]
Data Transfer Rate: 1000Mbps
Cables / Max Distance:
Category 5 or above UTP, up to 100m
50/125, 62.5/125, 100/140µm Multi-Mode fiber, up to 220
8.3/125, 8.7/125, 9/125, 10/125µm Single-Mode fiber, up to
     10km for CGM3700SC10
     20km for CGM3700BD3.20/CGM3700BD5.20
     40km for CGM3700SC40
     70km for CGM3700SC70
LEDs:
Unit — PWR, ACT
SX Port — SX Link, SX FDX
TP Port — TP Link, TP FDX
Power Requirement: 2A@+5V DC
Operating Temperature: 0° to 50° C
Humidity: 5% to 90%
Dimension: 26.2 x 70.3 x 94mm (H x W x D)
Safety: FCC Class A, CE Mark Approval, RoHS Compliance

DAN-CGM3700SC10 270,00 �

Thu, 04 Apr 2013 19:14:08 +0200

Gigabit Ethernet Converter 1000Base-TX RJ-45 <> 1000BaseSX SC MM 10km

DAN-CRM2325T 119,00 �

Thu, 04 Apr 2013 19:14:08 +0200

Serial Interface (RS-232) To Fiber (Multi-Mode) Media Converter

TECHNICAL SPECIFICATIONS

Model: CRM232
Standard: TIA/EIA-574
Connectors: RS-232 DB-25 Female & 850nm Multi-Mode Duplex-ST
dBm [ Min TX, Max TX, Sensitivity, Power Budget ]:
-16dBm, -10dBm, -29.5dBm, 13.5dB
Data Transfer Rate: Up to 115.2Kbps
Duplex Mode: n/a
Cables / Max Distance:
50/125, 62.5/125, 100/140µm Multi-Mode fiber, up to 2km
Shield serial cable for EMC compliance if intend to use, up to 15m
LEDs: none
Power Requirement: From RS-232 interface
Operating Temperature: 0° to 50° C
Humidity: 5% to 90%
Dimension: 20.1 x 45.2 x 50.1mm (H x W x D)
EMI Rating: FCC Class A, CE Mark Approval

DAN-CRM385BT 155,00 �

Thu, 04 Apr 2013 19:14:09 +0200

Serial Interface RS-485 Term.Block<>100Base FX 2km

DAN-CRM4859T 155,00 �

Thu, 04 Apr 2013 19:14:09 +0200

Serial Interface (RS-232/422/485) To Fiber (Single-/Multi-Mode) Media Converter

TECHNICAL SPECIFICATIONS

Model: CRM485BN / CRM485BN20 / CRM48TB / CRM485TB20
Standard: TIA/EIA-232 (ITU-T v.28), TIA/EIA-422 (ITU-T v.11),
TIA/EIA-485 (ISO/IEC8284)
Connectors:
CRM485BN — DB-9 Male & 850nm Multi-Mode Duplex-ST
CRM485BN20 — DB-9 Male & 1310nm Single-Mode Duplex-ST
CRM485TB — Terminal Block & 850nm Multi-Mode Duplex-ST
CRM485TB20 — Terminal Block & 1310nm Single-Mode Duplex-ST
Note:
DB-9 can be selected as RS-232 or RS-485/422 by DIP Switch.
RS-485 interface supports either 2- or 4-wire by DIP Switch selection.
dBm [ Min TX, Max TX, Sensitivity, Power Budget ]:
CRM485BN [ -16dBm, -10dBm, -29.5dBm, 13.5dB ]
CRM485BN20 [ -12dBm, -9dBm, -31dBm, 19dB ]
CRM485TB [ -16dBm, -10dBm, -29.5dBm, 13.5dB ]
CRM485TB20 [ -12dBm, -9dBm, -31dBm, 19dB ]
Max Data Transfer Rate / Distance:
RS-232 — 115.2Kbps, up to 15m (50ft)
RS-485/422 — 90Kbps, up to 1,220m (4,000ft)
RS-485/422 — 500Kbps, up to 92m (300ft)
MM Duplex-ST — Depends on serial interface, up to 2km (6,600ft)
SM Duplex-ST — Depends on serial interface, up to 20km (66,000ft)
Handshaking: Not supported
Duplex Mode:
RS-232 — n/a
RS-485 — Half-duplex for 2-wire, Full-duplex for 4-wire
Cables:
50/125, 62.5/125, 100/140µm Multi-Mode fiber
8.3/125, 8.7/125, 9/125, 10/125µm Single-Mode fiber
24 to 22 AWG gauge copper wire, Attenuation 20dB/1000ft@10MHz,
Differential Impedance 100ohm@10MHz
LEDs: PWR, F ACT, C ACT
Power Requirement: 1A@+5V DC
Operating Temperature: 0° to 50° C
Humidity: 5% to 90%
Dimension: 26.2 x 70.3 x 94mm (H x W x D)
EMI Rating: FCC Class B, CE Mark Approval

DAN-CRM4859TS2 215,00 �

Thu, 04 Apr 2013 19:14:09 +0200

Serial Interface RS-485/422/232 DB09 Male<>Fiber Singlemode ST

DAN-CRM485BTS2 215,00 �

Thu, 04 Apr 2013 19:14:09 +0200

Serial Interface RS-485 Term.Block<>100Base FX ST Fiber Singlemode 20km

UTP (max.)	: 100m (328ft)
Coaxial (max. per segment)	: 185m (607ft)

SWD.de/+ Manufacturer +/Danpex Corp./DAN-Media Converter Stand alone unit products

DAN-CEM0100 90,00 �

10Base-2 BNC <> 10Base-T RJ-45 Ethernet Converter

OVERVIEW

DEVICE DRIVERS SUPPORTED

TECHNICAL SPECIFICATIONS

DAN-CEM1500 117,00 �

10Base-FL ST Multi-Mode <> 10Base-T RJ-45 Ethernet Converter

OVERVIEW

DEVICE DRIVERS SUPPORTED

TECHNICAL SPECIFICATIONS

DAN-CFM3450BD3.20 444,00 �

DAN-CFM3450BD3.60 630,00 �

DAN-CFM3450SC 83,00 �

DAN-CFM3450SC20 179,00 �

DAN-CFM3450SC40 203,00 �

DAN-CFM3450SC60 999,99 �

DAN-CFM3450ST 83,00 �

DAN-CFOC2550C20 312,00 �

*** DISCONTINUED *** 100Base-FX To 10/100Base-TX Palm-size Media Converter

ADDITIONAL FEATURE

TECHNICAL SPECIFICATIONS

DAN-CFOC2550C40 354,00 �

DAN-CFOC2550C60 999,99 �

DAN-CGM3700SC 186,00 �

1000Base-SX/LX To 1000Base-T Media Converter

TECHNICAL SPECIFICATIONS

DAN-CGM3700SC10 270,00 �

DAN-CRM2325T 119,00 �

Serial Interface (RS-232) To Fiber (Multi-Mode) Media Converter

TECHNICAL SPECIFICATIONS

DAN-CRM385BT 155,00 �

DAN-CRM4859T 155,00 �

Serial Interface (RS-232/422/485) To Fiber (Single-/Multi-Mode) Media Converter

TECHNICAL SPECIFICATIONS

DAN-CRM4859TS2 215,00 �

DAN-CRM485BTS2 215,00 �

* DISCONTINUED * 100Base-FX To 10/100Base-TX Palm-size Media Converter