SWD.de/Products/Hardware/Network Hardware: Arcnet, Ethernet and more/Ethernet Network Components (Switches, Hubs, Converter) products

COM-32012-8 785,80 �

Fri, 13 Apr 2018 17:43:54 +0200

32012-8 RocketLinx ES8508F-M-XT Managed 8-Port industrial Ethernet switch with Multi-Mode fiber and extended temperature

RocketLinx ® ES8508F-M-XT

Managed Industrial 8-Port Fiber Ethernet Switch.

Part Number: 32012-8

Six 10/100BASE-TX and two SC fiber ports (2KM)
EN50121-4 EMC and IEC 61373 vibration standards for railway applications
Advanced Layer 2 features including: VLAN, Private VLAN,QinQ, GVRP, QoS, IGMP Snooping V1/V2/V3, rate control, port trunking, LACP, and online multiport mirroring
32Gbps non-blocking, 8K MAC address table
RSTP, MSTP and redundant ring support with sub 5ms ring recovery
Management via Web, PortVision DX, SNMP, Telnet, and Serial Console
Modbus TCP/IP support for participation on industrial Ethernet networks
Hardware watchdog timer for system reset and recovery
Configurable multi-event alarm output
IP31 rated rugged aluminum housing with DIN rail mounting
Dual 10-60VDC redundant power inputs (positive or negative)
Wide operating temperature (-40° to 75°C)
IPv6 support
RoHS 2 compliance under CE
NEMA TS2 certified

The RocketLinx ES8508F-XT is an industrial-grade managed 8-port switch with built-in fiber ports that features advanced Layer 2 management, security, and system reliability for deployment in extreme and mission critical networking applications.

The ES8508F-XT design incorporates the latest managed switch technologies to ensure reliable, high-bandwidth data communications including a 32Gbps switch fabric for real-time non-blocking data transmission, redundant network topology supporting ring, RSTP and MSTP, and a high performance ARM9 processor with an embedded hardware watchdog timer. These features combined with a rugged IP-31 grade housing and extended operating temperature guarantee performance and stability for traffic, rail, and other demanding applications..

COM-32060-9 785,80 �

Tue, 06 Oct 2020 02:32:58 +0200

32060-9 RocketLinx ES8510 Managed 10-Port industrial Ethernet switch with Gigabit

Managed Industrial Ethernet switch, seven Fast Ethernet ports, and three Gigabit Ethernet combo ports

Part Number: 32060-9

Seven 10/100BASE-TX ports and three Gigabit RJ45/SFP combo ports (10/100/1000BASE-TX, 100BASE-FX, 1000BASE-X)
Multiple Rapid Super Ring (recovery time <5ms), Dual Homing, Multiple Ring, Any Ring and RSTP
VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring
32Gbps Non-Blocking, 8K MAC address table
Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH and NetVision
Advanced security feature supports IP Security, Port Security, DHCP Server, IP and MAC Binding, IEEE 802.1x network access control
Event Notification by E-mail, SNMP trap, Syslog, Digital Input and Relay Output
Rigid aluminum case complies with IP31, heat dispersion,
Redundant power, DIN rail/wall-mounting/desktop installation
Wide operating temperature range (-20°C to 70°C)
IPV6 support

System Specifications

Hardware

Network Interfaces10/100BASE-TX
10/100/1000BASE-TX or 100BASE-FX
1000BASE-SX/LX/LHX/XD/ZX Gigabit Fiber
Connector TypesRJ45
SFP
EnclosureIP31 Grade Aluminum Metal Case
InstallationDIN Rail, wall mount
LED IndicatorsPower 1, Power 2, ring master (R.M.)
10/100BASE-TX link/activity
10/100BASE-TX full duplex/collision
Gigabit copper/SFP link activity
digital input 1&2, digital output 1&2
Digital Input (DI)Two digital inputs
4-Pin screw terminal block
Digital Output (DO)Two digital outputs (dry relay output)
4-Pin screw terminal block
Serial Console PortOne RJ45 RS-232 (TXD, RXD, Signal GND), Baud Rate: 9600bps,
Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None
Dimensions5.0" x 6.3" x 3.7"
127 x 160 x 94 mm
Product Weight2.63 lbs
1.19 kg

Ethernet Specifications

Number of PortsTen: 7 Standard Fast Ethernet and 3 combo RJ45/SFP Gigabit Ethernet
RJ4510/100BASE-TX, Auto MDI/MDIX, Auto-Negotiation (Speed/Duplex Mode)
10/100/1000BASE-TX, Auto MDI/MDIX, Auto-Negotiation (Speed/Duplex Mode)
SFP (Optional)100BASE-FX Fiber, 1000BASE-SX/LX, Auto MDI/MDIX, Auto-Negotiation (Speed/Duplex Mode)
Cable TypesCAT-3, CAT-4, CAT-5, CAT-5e (UTP or STP)
Link DistancesRJ45: 100 Meters
SFP: Depends on Model: Single-Mode: 30KM, Multi-Mode: 2KM
Port Alarm RelayYes
StandardsIEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
IEEE 802.1D-2004: Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1p: Class of Service
IEEE 802.1Q VLAN Tagging and GVRP
IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1X: Port Based Network Access Control
IEEE 802.3:10BASE-T
IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
IEEE 802.3u: 100BASE-TX, 100BASE-FX
IEEE 802.3x: Flow Control and Back-Pressure

Management Features

Configuration ManagementOut-band management: console port with command line interface (CLI) - similar to Cisco CLI, in-band management: NetVision (Windows application), web interface (HTTP/HTTPS) or a Telnet/SSH console with CLI
Embedded WatchdogEmbedded hardware watchdog timer automatically resets system if switch system failure occurs
System Upgrade/BackupTFTP/Web Interface for Firmware Upgrade and Configuration Backup/Restore
SNMPV1, V2c, V3 with SNMP trap function, up to four trap stations
SNMP MIBMIB-II, bridge MIB, VLAN MIB, IGMP MIB, Ethernet-like MIB, Comtrol private MIB, and RMON
Email WarningAutomatic warning, up to four accounts by pre-defined events
System LogSupports both local mode and server mode supported
DHCPDHCP client, DHCP server with IP and MAC address binding and DHCP

Network Performance

Back-PressureIEEE 802.3x: 10/100Mbps half-duplex only
Class of Service (CoS)IEEE 802.1p: 4 priority level (0-7), queue ID (0-3)
Flow Control Pause FrameIEEE 802.3x: 10/100Mbps Full-Duplex
IGMP SnoopingV1/V2 /V3 for multicast filtering and IGMP query V1/V2; supports unknown multicasting, processes forwarding policies: drop, flooding and forward to router port, 256 IGMP multicast groups
IP SecurityAssign Authorized IP Addresses to Specific Port, 10 Max/Port
Time SynchronizationSupports NTP protocol with daylight saving function, and localized time sync function
Port-Based Network Access ControlIEEE 802.1X: supports user authentication by the RADIUS account, password and key for the RADIUS servers (primary and secondary)
Port ConfigurationPort link speed, link mode, port status, enable/disable
Port MirroringOnline traffic monitoring on multiple selected ports
Port SecurityAssign authorized MAC addresses to specific port, 10 max/port
Port Trunk (Max)IEEE 802.3ad LACP with timer and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups
Private VLANDirect Client Ports in Isolated/Community VLAN to Promiscuous Port in Primary VLAN
Rate ControlIngress filtering for broadcast, multicast, unknown DA or all packets
Egress filtering for all packets
Switch Technology32Gbps switch fabric, store and forward Switch Technology, 8K MAC Address
System Throughput
- 10Mbps14,880pps
- 100Mbps148,880pps
- Gigabit Ethernet1,488,100pps
- 64 byte packet size
Transfer Packet Size64 bytes to 1522 bytes (includes 1522 bytes VLAN tag)
Packet Buffer1Mbits shared memory
Traffic Prioritization (QoS)Supports 4 physical queues, weighted round robin queuing (WRR 8:4:2:1) and strict priority scheme (IEEE 802.1p COS tag and IPv4 ToS/diffserv information) to prioritize industrial network traffic
VLAN (Max)IEEE 802.1Q: Tag VLAN with 256 (Max) VLAN entries, 2K GVRP entries; 3 VLAN link modes (trunk, hybrid, and link access)
Modbus TCP/IPCLI support for Modbus TCP/IP communications with function code 4 (factory automation). Operates as slave/server device, while a typical master/client device is a host computer running appropriate through Ethernet, The Modbus TCP/IP master can read or write to the Modbus registers provided by the Modbus TCP/IP. Application software (SCADA / HMI System)

Network Redundancy

Rapid Spanning Tree Protocol (RSTP)IEEE 802.1D-2004 RSTP
Compatible with Legacy STP and IEEE 802.1w
Multiple Spanning Tree ProtocolIEEE 802.1s MSTP: each MSTP instance can include one or more VLANS and supports multiple RSTPs deployed in a VLAN or multiple VLANs
Redundant Ring TechnologyFailure Recovery within 5ms
Rapid Dual Homing: Multiple Uplink Paths to Upper Switches
Ring Trunking: Integrates Port Aggregate Function in Ring Path to Get Higher
Throughput Ring Architecture
Multiple Ring: Couple or Multiples of Up to 16 Rings, Supports Up to 5 Fast Ethernet Rings/Switch

Electrical Specifications

Device
- DC Input Voltage
  (Positive or Negative)12 to 48VDC
- Current Consumption+24VDC @ 0.8A
- Power Consumption (max.)20W
Number of Power Connector1
Power Connector Type4-Pin screw terminal block
Power Input RedundancyDual redundant inputs
Reverse Polarity ProtectionYes
Digital Input2 with photo optical isolation
- Logic Low (0)0 to 10VDC
- Logic High (1)11 to 30VDC
Digital Output (Relay Output)2
- DC Input Voltage24VDC
- Current Consumption (24VDC)1A maximum

Environmental Specifications

Air Temperature
- System On-20° to 70° C
- System Off-40° to 85° C
Operating Humidity (non-condensing)5% to 95%
MTBF (Mean Time Between Failures)28.53 years

Export Information

Packaged Shipping Weight3.9 lbs
1.77 kg
Package Dimensions11.3" x 5.5" x 9.1"
287 x 139.7 x 231.1 mm
UPC Code7-56727-32060-9
ECCN5A992
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsCanadian EMC Requirements
ICES-003
European Standard EN55022
EN61000-6-4
CISPR 22
FCC Part 15 Subpart B
Class A limit
ImmunityEuropean Standard EN55024:
IEC 61000-6-2
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6: Conducted Distrubance
IEC 1000-4-8/EN61000-4-8: Magnetic Field
IEC 1000-4-11/EN61000-4-11: DIPS and voltage Variations
SafetyIEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
Free FallIEC 60068-2-32
Hi-PortAC 1.2KV for All Ports and Power
Regulatory ApprovalsEuropean Standard: 2002/95/EC Directive (RoHS)

COM-32011-1 928,80 �

Wed, 20 Jun 2018 12:50:17 +0200

32011-1 RocketLinx ES8508F-S-XT Managed 8-Port industrial Ethernet switch with Single-Mode fiber and extended temperature

RocketLinx ® ES8508F-S-XT

Managed Industrial 8-Port Fiber Ethernet Switch.

Part Number: 32011-1

Six 10/100BASE-TX and two SC fiber ports (30KM)
EN50121-4 EMC and IEC 61373 vibration standards for railway applications
Advanced Layer 2 features including: VLAN, Private VLAN,QinQ, GVRP, QoS, IGMP Snooping V1/V2/V3, rate control, port trunking, LACP, and online multiport mirroring
32Gbps non-blocking, 8K MAC address table
RSTP, MSTP and redundant ring support with sub 5ms ring recovery
Management via Web, PortVision DX, SNMP, Telnet, and Serial Console
Modbus TCP/IP support for participation on industrial Ethernet networks
Hardware watchdog timer for system reset and recovery
Configurable multi-event alarm output
IP31 rated rugged aluminum housing with DIN rail mounting
Dual 10-60VDC redundant power inputs (positive or negative)
Wide operating temperature (-40° to 75°C)
IPv6 support
RoHS 2 compliance under CE
NEMA TS2 certified

COM-32010-4 607,05 �

Fri, 13 Apr 2018 17:02:24 +0200

32010-4 RocketLinx ES8508-XT Managed 8-Port industrial Ethernet switch with extended temperature

RocketLinx ® ES8508-XT

Managed Industrial Ethernet switch, eight Fast Ethernet ports.

Part Number: 32010-4

For fiber models, please choose from the following:

RocketLinx ES8508F-S-XT (Single-Mode)
RocketLinx ES8508F-M-XT (Multi-Mode)

Product Highlights

Eight 10/100BASE-TX ports
EN50121-4 EMC and IEC 61373 vibration standards for railway applications
Advanced Layer 2 features including: VLAN, Private VLAN,QinQ, GVRP, QoS, IGMP Snooping V1/V2/V3, rate control, port trunking, LACP, and online multiport mirroring
32Gbps non-blocking, 8K MAC address table
RSTP, MSTP and redundant ring support with sub 5ms ring recovery
Management via Web, PortVision DX, SNMP, Telnet, and Serial Console
Modbus TCP/IP support for participation on industrial Ethernet networks
Hardware watchdog timer for system reset and recovery
Configurable multi-event alarm output
IP31 rated rugged aluminum housing with DIN rail mounting
Dual 10-60VDC redundant power inputs (positive or negative)
Wide operating temperature (-40° to 75°C)
IPv6 support
RoHS 2 compliance under CE
NEMA TS2 Certified

The RocketLinx ES8508-XT is an industrial-grade managed 8-port Fast Ethernet switch featuring advanced Layer 2 management, security, and system reliability for deployment in extreme and mission critical networking applications.

The ES8508-XT design incorporates the latest managed switch technologies to ensure reliable, high-bandwidth data communications including a 32Gbps switch fabric for real-time non-blocking data transmission, redundant network topology supporting ring, RSTP and MSTP, and a high performance ARM9 processor with an embedded hardware watchdog timer. These features combined with a rugged IP-31 grade housing and extended operating temperature guarantee performance and stability for traffic, rail, and other demanding applications.

Hardware

Network Interface10/100BASE-TX
Connector TypeRJ45
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
Installation MethodDIN rail
LED IndicatorsPower 1, Power 2, System Status Ring, Digital Input, Digital Output RJ45 Link/Activity
Digital Input (DI)One DI, 4-Pin Screw Terminal Block
Digital Output (DO)One DO (Dry Relay Output), 4-Pin Screw Terminal Block
Serial Console PortOne RJ45 RS-232 (TXD, RXD, Signal GND), Baud Rate: 9600bps, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None
Dimensions2.17" x 5.87" x 5.17"
550 x 149 x 131 mm
Product Weight1.95 lbs
.885 kg

Ethernet Specification

Number of Ports8
RJ45 (Standard)10/100BASE-TX, Auto MDI/MDIX, Auto-Negotiation (Speed/Duplex Mode)
Cable TypesCat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)
Link Distances100 Meters
Port Alarm RelayYes
StandardsIEEE802.1AB: Link Layer Discovery Protocol (LLDP)
IEEE802.1D-2004: Rapid Spanning Tree Protocol (RSTP)
IEEE802.1p: Class of Service
IEEE802.1Q VLAN Tagging and GVRP
IEEE802.1s: Multiple Spanning Tree Protocol (MSTP)
IEEE802.1x: Port Based Network Access Control
IEEE802.3:10BASE-T
IEEE802.3ad: Link Aggregation Control Protocol (LACP)
IEEE802.3x: Flow Control and Back-Pressure
IEEE1588: Precision Time Protocol (PTP)
Internet ProtocolIPv4 and IPv6

Management Features

ConfigurationNetVision
Out-Band Management: Console Port with Command Line Interface (CLI) - Similar to Cisco CLI, In-Band
Management: Web Interface (HTTP/HTTPS) or a Telnet/SSH Console with CLI
Embedded WatchdogEmbedded Hardware Watchdog Timer Automatically Resets System if Switch System Failure Occurs
System Upgrade/BackupProvides TFTP/Web Interface for Firmware Upgrade and Configuration Backup/Restore
SNMPV1, V2c, V3 with SNMP Trap Function, Up to Four Trap Stations
SNMP MIBMIB-II, Bridge MIB, VLAN MIB, IGMP MIB, Ethernet-like MIB, Comtrol Private MIB, and RMON
Email WarningAutomatic Warning, Up to Four Accounts by Pre-Defined Events
System LogSupports Both Local Mode and Server Mode
DHCPDHCP Client, DHCP Server with IP and MAC Address Binding and DHCP Agent (Option 82)

Network Performance

Back-PressureIEEE 802.3x 10/100Mbps half-duplex only
Class of Service (CoS)IEEE 802.1p 4 priority queues/port
Flow Control Pause FrameIEEE 802.3x 10/100Mbps full-duplex
IGMP SnoopingV1/V2 /V3 for multicast filtering and IGMP query V1/V2; supports unknown multicasting, processes forwarding policies: drop, flooding and forward to router port, 256 IGMP multicast groups
IP SecurityAssign authorized IP addresses to specific port, 10 max/port
Time SynchronizationSupports IEEE 1588 (precision time protocol), NTP protocol with daylight saving function, and localized time sync function
Port ConfigurationPort link speed, link mode, port status, enable/disable
Port MirroringOnline traffic monitoring on multiple selected ports
Port SecurityAssign authorized MAC addresses to specific port, 10 max/port
Port TrunkIEEE 802.3ad LACP with timer and static port trunk; trunk member up to 4 ports and maximum 4 trunk groups
Port-Based Network Access ControlIEEE 802.1X with RADIUS control, supports user authenticate by the RADIUS account, password and key for RADIUS server authentication
Private VLANDirect client ports in isolated/community VLAN to promiscuous port in primary VLAN
Rate ControlIngress filtering for broadcast, multicast, unknown DA or all packets. Egress filtering for all packet types
Switch Technology32Gbps switch fabric, store/forward switch technology, 8K MAC address
System Throughput26 mega packets/second, 64 byte packet Size,
14,880pps (10Mbps); 148,800pps (100Mbps)
Transfer Packet Size64 bytes to 1522 bytes (includes 1522 bytes VLAN tag)
Packet Buffer1MBits shared memory
Traffic Prioritization (QoS)Supports 4 physical queues, weighted round robin queuing (WRR 8:4:2:1) and strict priority scheme, which follows 802.1p COS tag and IPv4 ToS/ diffserv information to prioritize industrial network traffic
VLANIEEE 802.1Q tag VLAN with 256 (max) VLAN entries and 2K GVRP entries; 3 VLAN link modes: trunk, hybrid, and link access
Modbus TCP/IPSupports Modbus TCP/IP Communications with Function Code 4 for Factory Automation through the CLI, Operates as Slave/Server Device, While a Typical Master/Client Device is a Host Computer Running Appropriate Through Ethernet, Thus the Modbus TCP/IP Master Can Read or Write to the Modbus Registers Provided by the Modbus TCP/IP. Application Software (SCADA / HMI System)

Network Redundancy

Rapid Spanning Tree Protocol (RSTP)IEEE 802.1D-2004 rapid spanning tree protocol (RSTP)
compatible with legacy STP and IEEE 802.1w
Multiple Spanning TreeIEEE 802.1s MSTP, each MSTP instance can include one or more VLANs
and supports multiple RSTP deployed in a VLAN or multiple VLANs
Redundant Ring TechnologyFailure recovery within 5ms
Rapid dual homing: multiple uplink paths to upper switches
Ring trunking: integrates port aggregate function in ring path to get higher throughput ring architecture
Multiple Ring: couple or multiples of up to 16 rapid super rings, supports up to 4 fast ethernet rings/switch

Electrical Specifications

Device
- DC Input Voltage
  (Positive or Negative)10 to 60VDC
- Current Consumption+24VDC @ 625mA
- Power Consumption (Max.)15W
Number of Power Connectors1
Power Connector Type4-Pin screw terminal block
Power Input RedundancyDual redundant inputs
Reverse Polarity ProtectionYes
Digital Input1 with photo optical isolation
- Logic Low (0)0 to 10VDC
- Logic High (1)11 to 30VDC
Digital Output (Relay Output)1
- DC Input Voltage24VDC
- Current Consumption (24VDC)1A maximum
- Multi-Event Relay FeaturePower, Port Link, DI/Ring Status Change, Ping Reset, or Perform Routing Relay On/Off Function

Environmental Specifications

Air Temperature
- System On-40° to 75° C
- System Off-40° to 85° C
Operating Humidity (Non-Condensing)5% to 95%
MTBF (Mean Time Between Failures)79.98 Years

Export Information

Packaged Shipping WeightTBA lbs
TAB kg
Package DimensionsTBA
UPC Code7-56727-32030-2
ECCN5A992
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsCanadian EMC Requirements
ICES-003
European Standard EN55022
CISPR 22
FCC Part 15 Subpart B
Class A limit
Heavy Industrial
IEC 1000-6-4/EN61000-4-9: Pulse Magnetic Field
ImmunityHeavy Industrial IEC/EN 61000-6-2:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6: Conducted Distrubance
IEC 1000-4-8/EN61000-4-8: Magnetic Field
Railway EMCEN 50121-4: Signaling and Telecommunications Apparatus
EN 50121-1: Rolling Stock. Train and Complete Vehicle
Hi-PotAC 1.5KV for All Ports and Power
OtherNEMA TS2 Certified Railway Vibration/Shock:
IEC 61373
Free Fall with Package:
IEC 60068-2-32
Regulatory Approvals

COM-32059-3 449,75 �

Sun, 07 Mar 2021 18:17:24 +0100

32059-3 RocketLinx ES8108F-M-XT Unmanaged 8-Port industrial Ethernet switch, extended temperature, Multi-Mode Fiber

RocketLinx ES8108F-M-XT

Unmanaged Industrial Ethernet switch, eight Fast Ethernet ports, CID2 certification, extended temperature ratings

Part Number: 32059-3

Class I Division 2 certified for potentially hazardous locations
Six 10/100BASE-TX ports and two 100BASE-FX (Multi-Mode) fiber ports
2.0Gbps Switch Fabric with excellent data exchange performance
QoS for packet forwarding precedence
Broadcast storm packet filtering
VLAN tag priority support
Supports 1.5KV Hi-Pot isolation protection
Redundant dual power input 10 to 60VDC
Port and Power Event Alarm
Compact aluminum case with IP31 grade protection
-40° to 75°C operating temperature for harsh environments
DIN rail installation
RoHS 2 compliant under CE

PRODUCT UPDATE: We have recently improved the ES8108 series. View our comparison chart for the updates. RocketLinx ES8108 series product change notification

The RocketLinx ES8108F-M-XT is Comtrol Corporation’s 8-port (10/100BASE-TX ports and two 100BASE-FX Multi-Mode fiber ports) industrial switch featuring a 2.0Gbps Packet Switch engine with packet forwarding and filtering mechanisms to meet industrial communications standards. It provides packet forwarding capabilities to handle 64 to 1522 byte sizes in two priority queues to optimize data forwarding performance. Broadcast storm filtering and flow control functions ensure data delivery free of traffic congestion.

For installation in hazardous or industrial environments, the RocketLinx ES8108F-M-XT is equipped with two redundant power inputs, CID2 certification, features wide input voltage ranges, and operates within a broad -40° to 75°C temperature range. For ease-of-maintenance, the RocketLinx ES8108F-M-XT has one alarm relay for port link and power events to assist engineers with on-site notifications.

RocketLinx Reliability

The RocketLinx ES8108F-M-XT has dual power inputs, and can also operate on 12 to 48VDC. Dual power inputs and built-in reverse power polarity protection are designed as the redundant power system to ensure power continuity. With the 1.5KV Hi-Pot isolation protection, CE/FCC/UL regulatory approvals, CID2 certification, and extended temperature ratings, the RocketLinx ES8108F-M-XT is the ideal switch solution for industrial and hazardous environments.

Hardware

Bus Interface Specification10/100BASE-TX, 100BASE-FX (Multi-Mode)
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
InstallationDIN Rail
LED IndicatorsPower 1, Power 2, Port/Power Alarm, RJ45 Port Link/Activity
Dimensions4.72" x 2.17" x 4.58"
120 x 55 x 116 mm
Product Weight1.25 lb
0.57 kg

Technology

StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX, 100BASE-FX
Switch Technology2.0Gbps Switch Fabric
Store and Forward Technology
Flow ControlIEEE 802.3x Flow Control
QoSIEEE 802.1Q Quality of Service
IEEE 802.1p Class of Service

Performance

System Throughput1.49Mbps
Number of MAC Address with Auto-Learning2K
Packet Buffer Memory448Kbits
Transfer Packet Size64 - 1522 Bytes
Broadcast Storm ControlYes. Enabled by Default
Broadcast Traffic ThresholdEnabled by Default
- 100Mbps200 Packets/Sec.
- 10Mbps20 Packets/Sec.
Class of Service2 Packet Forwarding @ Queues
- High Queue(4 ~ 7)
- Low Queue(0 ~ 3)
Quality of ServiceSupports VLAN tag priority and IPv4 Packet Performance
Enabled by Default
Event AlarmBoth Port and Power Alarm
Enabled by 9-pin DIP switch

Electrical Specifications

Device
- DC Input Voltage10 to 60VDC
- Current Consumption+24VDC 250 mA
Power Consumption (max.)6W
Power Connector1
Power Connector Type6-Pin Screw Terminal Block
Power Input RedundancyDual Redundant Independent Power Inputs
Reverse Polarity ProtectionYes
Power Alarm RelayAlarm for power failure notification
Relay Rating0.5A Max. @ 24VDC

Environmental Specifications

Air Temperature
- System On-40° to 75° C
- System Off-40° to 85° C
Operating Humidity (non-condensing)0% to 95%
MTBF (Mean Time Between Failures)45.7 years

Ethernet Specification

Connector TypeRJ45
Number of Ports6
Ethernet Cable TypeCat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)
Standard10/100BASE-TX Auto MDI/MDIX, Auto-negotiation
Link Distance100 Meters
Port Alarm RelayAlarm Relay for Port Failure Notification
Relay Rating0.5A Max. @ 24VDC

Optical Fiber Specifications

Fiber ModeMulti
Connector TypeDuplex SC
Number of Ports2
StandardIEEE802.3 100BASE-FX
Fiber Cable Type50/125um or 62.5/125um
Link Distance (Max)2KM
Wavelength1310nm
Transmit Power (Min)-20dBM
Transmit Power (Max)-14dBM
Receive Sensitivity (Min)0dBM
Receive Sensitivity (Max)-31dBM
Link Budget11dBM

Export Information

Package Shipping Weight1.60 lbs
0.73 kg
Package Dimensions7" x 7.75" x 3.125"
178 x 197 x 79 mm
UPC Code7-56727-32059-3
ECCN5A991
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsIEC61000-6-4 / EN61000-6-4
CISPR 22
EN55022
FCC Part 15 Subpart B
Class A
ImmunityEuropean Standard EN55024:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6:Conducted Distrubance
IEC 1000-4-8/EN61000-4-8: Magnetic Field
SafetyUL Class I Div 2* (Certified for use in A, B, C, D Hazardous Location)
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
Other Regulatory ApprovalsRoHS 2 compliant under CE

COM-32054-8 278,15 �

Fri, 13 Apr 2018 16:41:32 +0200

32054-8 RocketLinx ES8108-XT Unmanaged 8-Port industrial Ethernet switch, extended temperature

RocketLinx ES8108-XT

Unmanaged Industrial Ethernet switch, eight Fast Ethernet ports, extended temperature ratings

Part Number: 32054-8

Class I Division 2 certified for potentially hazardous locations
8-Port 10/100BASE-TX Industrial Fast Ethernet Switch
2.0Gbps Switch Fabric with excellent data exchange performance
QoS for packet forwarding precedence
Broadcast storm packet filtering
Supports 1.5KV Hi-Pot isolation protection
Redundant dual power input 10 to 60VDC
Port and Power Event Alarm
Compact aluminum case with IP31 grade protection
-40° to 75°C operating temperature for harsh environments
DIN rail installation
Meets heavy industrial EMI/EMC regulations
RoHS 2 compliant under CE
VLAN tag priority support

PRODUCT UPDATE: We have recently improved the ES8108 series. View our comparison chart for the updates. RocketLinx ES8108 series product change notification

View the RocketLinx ES8108-XT Single-Mode and Multi-Mode fiber options.

The RocketLinx ES8108-XT is Comtrol Corporation’s 8-port Fast Ethernet industrial switch featuring a 2.0Gbps Packet Switch engine with packet forwarding and filtering mechanisms to meet industrial communications standards. It provides packet forwarding capabilities to handle 64 to 1522 byte sizes in two priority queues to optimize data forwarding performance. Broadcast storm filtering and flow control functions ensure data delivery free of traffic congestion.

For installation in hazardous or industrial environments, the RocketLinx ES8108-XT is equipped with two redundant power inputs, features wide input voltage ranges, and operates within a broad -40° to 75°C temperature range. For ease-of-maintenance, the RocketLinx ES8108-XT has one alarm relay for port link and power events to assist engineers with on-site notifications.

RocketLinx Reliability

The RocketLinx ES8108-XT has dual power inputs, and can also operate on 12 to 48VDC. Dual power inputs and built-in reverse power polarity protection are designed as the redundant power system to ensure power continuity. With the 1.5KV Hi-Pot isolation protection, CE/FCC/UL regulatory approvals, and extended temperature ratings, the RocketLinx ES8108-XT is the ideal switch solution for industrial and hazardous environments.

Hardware

Network Interface Specification10/100BASE-TX
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
InstallationDIN Rail
LED IndicatorsPower 1, Power 2, Port/Power Alarm, RJ45 Port Link/Activity
Dimensions4.72" x 2.17" x 4.25"
120 x 55 x 108 mm
Product Weight1.20 lb
0.54 kg

Technology

StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Switch Technology2.0Gbps Switch Fabric
Store and Forward Technology
Flow ControlIEEE 802.3x Flow Control
QoSIEEE 802.1Q Quality of Service
IEEE 802.1p Class of Service

Performance

Aggregate System Throughput1.49Mbps
Number of MAC Address2K
Packet Buffer Memory448Kbits
Transfer Packet Size64 - 1522 Bytes
Broadcast Storm ControlYes. Enabled by Default
Broadcast Traffic ThresholdEnabled by Default
- 100Mbps200 Packets/Sec.
- 10Mbps20 Packets/Sec.
Class of Service2 Packet Forwarding @ Queues
- High Queue(4 ~ 7)
- Low Queue(0 ~ 3)
Quality of ServiceSupports VLAN tag priority and IPv4 Packet Performance
Enabled by Default
Event AlarmBoth Port and Power Alarm
Enabled by 9-pin DIP switch

Electrical Specifications

Device
- DC Input Voltage10 to 60VDC
- Current Consumption+24VDC 220 mA
Power Consumption (max.)5.3W
Power Connector1
Power Connector Type6-Pin Screw Terminal Block
Power Input RedundancyDual Redundant Independent Power Inputs
Reverse Polarity ProtectionYes
Power Alarm RelayAlarm for power failure notification
Relay Rating0.5A Max. @ 24VDC

Environmental Specifications

Air Temperature
- System On-40° to 75° C
- System Off-40° to 85° C
Operating Humidity (non-condensing)0% to 95%
MTBF (Mean Time Between Failures)45.7 years

Ethernet Specification

Connector TypeRJ45
Number of Ports8
Ethernet Cable TypeCat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)
Standard10/100BASE-TX Auto MDI/MDIX, Auto-negotiation
Link Distance100 Meters
Port Alarm RelayAlarm Relay for Port Failure Notification
Relay Rating0.5A Max. @ 24VDC

Export Information

Package Shipping Weight1.55 lbs
0.70 kg
Package Dimensions7" x 7.75" x 3.125"
178 x 197 x 79 mm
UPC Code7-56727-32054-8
ECCN5A991
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsIEC61000-6-4 / EN61000-6-4 / CISPR22
FCC Part 15 Subpart B
Class A
EN55022
ImmunityIEC61000-6-2 / EN61000-6-2:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6:Conducted Distrubance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
SafetyUL Class I Div 2* Certified for use in Groups A, B, C, D Hazardous Location
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
Other Regulatory ApprovalsRoHS 2 compliant under CE

COM-32055-5 192,35 �

Fri, 13 Apr 2018 16:38:41 +0200

Unmanaged Industrial Ethernet switch, eight Fast Ethernet ports

Part Number: 32055-5

8-Port 10/100BASE-TX Industrial Fast Ethernet Switch
2.0Gbps Switch Fabric with excellent data exchange performance
QoS for packet forwarding precedence
Broadcast storm packet filtering
Supports 1.5KV Hi-Pot isolation protection
Redundant dual power input 10 to 60VDC
Port and Power Event Alarm
Compact aluminum case with IP31 grade protection
-25° to 70°C operating temperature for harsh environments
DIN rail installation
Meets heavy industrial EMI/EMC regulations
VLAN tag priority support

PRODUCT UPDATE: We have recently improved the ES8108 series. View our comparison chart for the updates.

RocketLinx ES8108 series product change notification

System Specifications

Hardware

Bus Interface Specification10/100BASE-TX
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
InstallationDIN rail
LED IndicatorsPower 1, Power 2, Port/Power Alarm, RJ45 Port Link/Activity
Dimensions4.72" x 2.17" x 4.25"
120 x 55 x 108 mm
Product Weight1.2 lb
0.54 kg

Technology

StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Switch Technology2.0Gbps Switch Fabric
Store and Forward Technology
Flow ControlIEEE 802.3x Flow Control
QoSIEEE 802.1Q Quality of Service
IEEE 802.1p Class of Service

Performance

Aggregate System Throughput1.49Mbps
Number of MAC Address2K
Packet Buffer Memory448Kbits
Transfer Packet Size64 - 1522 Bytes (Ling Packet Forwarding Ability)
Broadcast Storm ControlYes. Enabled by Default
Broadcast Traffic ThresholdEnabled by Default
- 100Mbps200 Packets/Sec.
- 10Mbps20 Packets/Sec.
Class of Service2 Packet Forwarding @ Queues
- High Queue(4 - 7)
- Low Queue(0 - 3)
Quality of ServiceSupports VLAN tag priority and IPv4 Packet Performance
Enabled by Default
Event AlarmBoth Port and Power Alarm
Enabled by 9-pin DIP switch

Electrical Specifications

Device
- DC Input Voltage10 to 60VDC
- Current Consumption+24VDC 0.33A
Power Consumption (max.)3W
Power Connector1
Power Connector Type6-Pin Screw Terminal Block
Power Input RedundancyDual Redundant Independent Power Inputs
Reverse Polarity ProtectionYes
Power Alarm RelayAlarm for power failure notification
Relay Rating0.5A Max. @ 24VDC

Environmental Specifications

Air Temperature
- System On-25° to 70° C
- System Off-40° to 85° C
Operating Humidity (non-condensing)5% to 95%
MTBF (Mean Time Between Failures)146.6 years

Ethernet Specification

Connector TypeRJ45
Number of Ports8
Ethernet Cable TypeCAT-3, CAT-4, CAT-5, CAT-5e (UTP or STP)
Standard10/100BASE-TX Auto MDI/MDIX, Auto-negotiation
Link Distance100 Meters
Port Alarm RelayAlarm Relay for Port Failure Notification
Relay Rating1A Max. @ 24VDC

Export Information

Package Shipping Weight2.2 lbs
1 kg
Package Dimensions7" x 7.75" x 3.125"
178 x 197 x 79 mm
UPC Code7-56727-32055-5
ECCN5A991
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsHeavy Industrial Equip. Std. IEC/EN61000-6-4
CISPR16-1-2/-2-1/-2-3/22
FCC Part 15 Subpart B
Class A
ImmunityEuropean Standard EN55024:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6:Conducted Distrubance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
SafetyIEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
Other Regulatory ApprovalsRoHS2 compliant under CE

COM-32024-1 142,30 �

Fri, 13 Apr 2018 16:14:40 +0200

32024-1 RocketLinx ES8105-XT Unmanaged 5-Port industrial Ethernet switch, extended temperature

RocketLinx ES8105-XT

Unmanaged industrial Ethernet switch with five Fast Ethernet ports, an aluminum metal case, DIN rail installation, extended temperature rating, and CID2 hazardous location certification.

Part Number: 32024-1

Class I Division 2 certified for potentially hazardous locations
Compact industrial Fast Ethernet switch
Five - 10/100BASE-TX ports
3.2Gbps Switch Fabric
AC or DC power input (18 to 32VDC or 18 to 27VAC)
DIN rail installation
-40° to +75° C extended operating temperature for extreme environments
Alarm relay output for port event notifications
Aluminum metal case with IP31 grade protection for drip-proof and dustproof protection
Supports 1.5KV Hi-Pot isolation protection
Plug-and-play
RoHS 2 compliant under CE
UL listed

View the RocketLinx ES8105-XT Single-Mode and Multi-Mode fiber options.

The RocketLinx ES8105-XT is a compact 5-port Fast Ethernet industrial switch featuring a 3.2Gbps switch fabric with Store and Forward technology, and housed in a slim industrial enclosure to save rail or panel space in compact system designs.

For installation in hazardous or industrial environments, the RocketLinx ES8105-XT features an extended operating temperature range (-40° to 75° C) and provides IP31 protection to guard against dust and water.

The ES8105-XT is an unmanaged switch that requires no user setup and immediately starts operating as soon as power is applied for true “plug-and-play” operation. The RocketLinx ES8105-XT supports 18 to 27VAC or 18 to 32VDC power inputs and provides built-in reverse power polarity protection.

For ease-of-maintenance, the RocketLinx ES8105-XT has one alarm relay that is controlled by a DIP switch to assist engineers with onsite notifications in the case of link-down events.

RocketLinx Reliability

With the CE/FCC/UL regulatory approvals, extended temperature ratings, 5-year warranty, CID2 certification, and rugged aluminum design, the RocketLinx ES8105-XT is the ideal switch solution for industrial and hazardous environments.

Hardware

Bus Interface Specification10/100BASE-TX
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
InstallationDIN rail
LED IndicatorsPower, Alarm, 10Mbps Link/Activity, 100Mbps Link/Activity
Dimensions3.9" x 1.2" x 4.4"
99 x 30.5 x 112 mm
Product Weight0.65 lbs
0.295 kg

Technology

StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Switch Technology3.2Gbps switch fabric
Store and forward technology
Aggregate System Throughput1.49Mbps
Flow ControlIEEE 802.3x Flow Control

Ethernet Specifications

Connector TypeRJ45
Number of Ports5
Ethernet Cable TypeCat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)
Link Distance100 Meters
Port Type10/100BASE-TX
Auto MDI/MDIX, auto-negotiation
Port Failure AlarmYes
DIP switch enabled
Relay Rating1A Max. @ 24VDC

Electrical Specifications

Device
- Power InputAC or DC
- DC Input Voltage18 to 32VDC
- Current Consumption (+24VDC)130mA
- AC Input Voltage18 to 27VAC
  47 to 63Hz
- Power Consumption (Max)3W
Power Connector1
Power Connector Type4-Pin Screw Terminal Block
Reverse Polarity ProtectionYes

Environmental Specifications

Air Temperature
- System On-40° to 75° C
- System Off-40° to 85° C
Operating Humidity (Non-Condensing)0% to 95%
Storage Humidity0% to 95%
MTBF (Mean Time Between Failures)TBD

Export Information

Packaged Shipping Weight0.90lbs
0.41 kg
Package Dimensions6.0" x 2.5" x 5.0"
152 x 63.5 x 127 mm
UPC Code7-56727-32024-1
ECCN5A991
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsEuropean Standard EN55055
CISPR 22
FCC Part 15 Subpart B
Class B limit
ImmunityEuropean Standard EN55024:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6:Conducted Distrubance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
IEC 1000-4-6/EN61000-4-11: DIPS and voltage Variations
SafetyUL 508 Class I Div 2*
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
Other Regulatory ApprovalsRoHS 2 compliant under CE

COM-32028-9 299,60 �

Fri, 13 Apr 2018 16:18:06 +0200

32028-9 RocketLinx ES8105F-S-XT Unmanaged 5-Port industrial Ethernet switch, extended temperature, Single-Mode Fiber

RocketLinx ES8105F-S-XT

Unmanaged industrial Ethernet switch with four 10/100BASE-TX ports and one Fast Ethernet fiber port, an aluminum metal case, DIN rail installation, extended temperature rating, and CID2 hazardous location certification

Part Number: 32028-9

Class I Division 2 certified for potentially hazardous locations
Compact industrial Fast Ethernet fiber switch
Four - 10/100BASE-TX ports and one Fast Ethernet (100BASE-FX) fiber port
Single-Mode (30KM)
3.2Gbps Switch Fabric
AC or DC power input (18 to 32VDC or 18 to 27VAC)
DIN rail installation
-40° to +75° C extended operating temperature for extreme environments
Alarm relay output for port event notifications
Aluminum metal case with IP31 grade protection for drip-proof and dustproof protection
Supports 1.5KV Hi-Pot isolation protection
Plug-and-play
RoHS 2 compliant under CE
UL listed

The RocketLinx ES8105F-S-XT is a compact 4-port Fast Ethernet switch with one 100BASE-FX fiber port, featuring a 3.2Gbps switch fabric with Store and Forward technology and housed in a slim industrial enclosure to save rail or panel space in compact system designs.

For installation in hazardous or industrial environments, the RocketLinx ES8105F-S-XT features an extended operating temperature range (-40° to 75° C), has CID2 certification, and provides IP31 protection to guard against dust and water.

The ES8105F-S-XT is an unmanaged switch that requires no user setup and immediately starts operating as soon as power is applied for true “plug-and-play” operation. The RocketLinx ES8105F-S-XT supports 18 to 27VAC or 18 to 32VDC power inputs and provides built-in reverse power polarity protection.

For ease-of-maintenance, the RocketLinx ES8105F-S-XT has one alarm relay that is controlled by a DIP switch to assist engineers with onsite notifications in the case of link-down events.

RocketLinx Reliability

With the CE/FCC/UL regulatory approvals, extended temperature ratings, 5-year warranty, CID2 certification, and rugged aluminum design, the RocketLinx ES8105F-S-XT is the ideal switch solution for industrial and hazardous environments.

Hardware

Bus Interface Specification10/100BASE-TX, 100BASE-FX
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
InstallationDIN rail
LED IndicatorsPower, Alarm, 10Mbps Link/Activity, 100Mbps Link/Activity, Fiber port link/activity
Dimensions3.9" x 1.2" x 4.4"
99 x 30.5 x 112 mm
Product Weight0.65 lbs
0.295 kg

Technology

StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3u 100BASE-FX
Switch Technology3.2Gbps switch fabric
Store and forward technology
Aggregate System Throughput1.49Mbps
Flow ControlIEEE 802.3x Flow Control

Ethernet Specifications

Connector TypeRJ45
Number of Ports4
Ethernet Cable TypeCat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)
Link Distance100 Meters
Port Type10/100BASE-TX
Auto MDI/MDIX, auto-negotiation
Port Failure AlarmYes
DIP switch enabled
Relay Rating1A Max. @ 24VDC

Optical Fiber Specifications

Fiber ModeSingle
Wavelength1310nm
Connector TypeDuplex SC
Number of Ports1
Fiber Cable Type8~10/125um
Link Distance (Max)30KM
Transmit Power (Min)-15dBM
Transmit Power (Max)-8dBM
Receive Sensitivity (Min)0
Receive Sensitivity (Max)-34dBM
Link Budget19dBM

Electrical Specifications

Device
- Power InputAC or DC
- DC Input Voltage18 to 32VDC
- Current Consumption (+24VDC)170mA
- AC Input Voltage18 to 27VAC
  47 to 63Hz
- Power Consumption (Max)4W
Power Connector1
Power Connector Type4-Pin Screw Terminal Block
Reverse Polarity ProtectionYes

Environmental Specifications

Air Temperature
- System On-40° to 75° C
- System Off-40° to 85° C
Operating Humidity (Non-Condensing)0% to 95%
Storage Humidity0% to 95%
MTBF (Mean Time Between Failures)TBD

Export Information

Packaged Shipping Weight0.90lbs
0.41 kg
Package Dimensions6.0" x 2.5" x 5.0"
152 x 63.5 x 127 mm
UPC Code7-56727-32028-9
ECCN5A991
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsEuropean Standard EN55055
CISPR 22
FCC Part 15 Subpart B
Class B limit
ImmunityEuropean Standard EN55024:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6:Conducted Distrubance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
IEC 1000-4-6/EN61000-4-11: DIPS and voltage Variations
SafetyUL 508 Class I Div 2*
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
Other Regulatory ApprovalsRoHS 2 compliant under CE

COM-32058-6 571,30 �

Fri, 13 Apr 2018 16:43:58 +0200

32058-6 RocketLinx ES8108F-S-XT Unmanaged 8-Port industrial Ethernet switch, extended temperature, Single-Mode Fiber

RocketLinx ES8108F-S-XT

Unmanaged Industrial Ethernet switch, eight Fast Ethernet ports, CID2 certification, extended temperature ratings

Part Number: 32058-6

Class I Division 2 certified for potentially hazardous locations
Six 10/100BASE-TX ports and two 100BASE-FX (Single-Mode) fiber ports
2.0Gbps Switch Fabric with excellent data exchange performance
QoS for packet forwarding precedence
Broadcast storm packet filtering
VLAN tag priority support
Supports 1.5KV Hi-Pot isolation protection
Redundant dual power input 10 to 60VDC
Port and Power Event Alarm
Compact aluminum case with IP31 grade protection
-40° to 75°C operating temperature for harsh environments
DIN rail installation
RoHS 2 compliant under CE

PRODUCT UPDATE: We have recently improved the ES8108 series. View our comparison chart for the updates. RocketLinx ES8108 series product change notification

The RocketLinx ES8108F-S-XT is Comtrol Corporation’s 8-port (10/100BASE-TX ports and two 100BASE-FX Single-Mode fiber ports) industrial switch featuring a 2.0Gbps Packet Switch engine with packet forwarding and filtering mechanisms to meet industrial communications standards. It provides packet forwarding capabilities to handle 64 to 1522 byte sizes in two priority queues to optimize data forwarding performance. Broadcast storm filtering and flow control functions ensure data delivery free of traffic congestion.

For installation in hazardous or industrial environments, the RocketLinx ES8108F-S-XT is equipped with two redundant power inputs, CID2 certification, features wide input voltage ranges, and operates within a broad -40° to 75°C temperature range. For ease-of-maintenance, the RocketLinx ES8108F-S-XT has one alarm relay for port link and power events to assist engineers with on-site notifications.

RocketLinx Reliability

The RocketLinx ES8108F-S-XT has dual power inputs, and can also operate on 12 to 48VDC. Dual power inputs and built-in reverse power polarity protection are designed as the redundant power system to ensure power continuity. With the 1.5KV Hi-Pot isolation protection, CE/FCC/UL regulatory approvals, CID2 certification, and extended temperature ratings, the RocketLinx ES8108F-S-XT is the ideal switch solution for industrial and hazardous environments.

Hardware

Bus Interface Specification10/100BASE-TX, 100BASE-FX (Single-Mode)
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
InstallationDIN Rail
LED IndicatorsPower 1, Power 2, Port/Power Alarm, RJ45 Port Link/Activity
Dimensions4.72" x 2.17" x 4.58"
120 x 55 x 116 mm
Product Weight1.25 lb
0.57 kg

Technology

StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX, 100BASE-FX
Switch Technology2.0Gbps Switch Fabric
Store and Forward Technology
Flow ControlIEEE 802.3x Flow Control
QoSIEEE 802.1Q Quality of Service
IEEE 802.1p Class of Service

Performance

System Throughput1.49Mbps
Number of MAC Address with Auto-Learning2K
Packet Buffer Memory448Kbits
Transfer Packet Size64 - 1522 Bytes
Broadcast Storm ControlYes. Enabled by Default
Broadcast Traffic ThresholdEnabled by Default
- 100Mbps200 Packets/Sec.
- 10Mbps20 Packets/Sec.
Class of Service2 Packet Forwarding @ Queues
- High Queue(4 ~ 7)
- Low Queue(0 ~ 3)
Quality of ServiceSupports VLAN tag priority and IPv4 Packet Performance
Enabled by Default
Event AlarmBoth Port and Power Alarm
Enabled by 9-pin DIP switch

Electrical Specifications

Device
- DC Input Voltage10 to 60VDC
- Current Consumption+24VDC 250 mA
Power Consumption (max.)6W
Power Connector1
Power Connector Type6-Pin Screw Terminal Block
Power Input RedundancyDual Redundant Independent Power Inputs
Reverse Polarity ProtectionYes
Power Alarm RelayAlarm for power failure notification
Relay Rating0.5A Max. @ 24VDC

Environmental Specifications

Air Temperature
- System On-40° to 75° C
- System Off-40° to 85° C
Operating Humidity (non-condensing)0% to 95%
MTBF (Mean Time Between Failures)45.7 years

Ethernet Specification

Connector TypeRJ45
Number of Ports6
Ethernet Cable TypeCat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)
Standard10/100BASE-TX Auto MDI/MDIX, Auto-negotiation
Link Distance100 Meters
Port Alarm RelayAlarm Relay for Port Failure Notification
Relay Rating0.5A Max. @ 24VDC

Optical Fiber Specifications

Fiber ModeSingle
Connector TypeDuplex SC
Number of Ports2
StandardIEEE802.3 100BASE-FX
Fiber Cable Type8-10/125um
Link Distance (Max)30KM
Wavelength1310nm
Transmit Power (Min)-15dBM
Transmit Power (Max)-8dBM
Receive Sensitivity (Min)0dBM
Receive Sensitivity (Max)-34dBM
Link Budget19dBM

Export Information

Package Shipping Weight1.60 lbs
0.73 kg
Package Dimensions7" x 7.75" x 3.125"
178 x 197 x 79 mm
UPC Code7-56727-32058-6
ECCN5A991
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsIEC61000-6-4 ? EN61000-6-4
CISPR 22
EN55022
FCC Part 15 Subpart B
Class A
ImmunityIEC61000-6-2 / EN61000-6-2:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6:Conducted Distrubance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
SafetyUL Class I Div 2* (Certified for use in Groups A, B, C, D Hazardous Location)
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
Other Regulatory ApprovalsRoHS 2 compliant under CE

COM-32029-6 242,40 �

Fri, 13 Apr 2018 16:22:32 +0200

32029-6 RocketLinx ES8105F-M-XT Unmanaged 5-Port industrial Ethernet switch, extended temperature, Multi-Mode Fiber

RocketLinx ES8105F-M-XT

Part Number: 32029-6

Class I Division 2 certified for potentially hazardous locations
Compact industrial Fast Ethernet fiber switch
Four - 10/100BASE-TX ports and one Fast Ethernet (100BASE-FX) fiber port
Multi-Mode (2KM)
3.2Gbps Switch Fabric
AC or DC power input (18 to 32VDC or 18 to 27VAC)
DIN rail installation
-40° to +75° C extended operating temperature for extreme environments
Alarm relay output for port event notifications
Aluminum metal case with IP31 grade protection for drip-proof and dustproof protection
Supports 1.5KV Hi-Pot isolation protection
Plug-and-play
RoHS 2 compliant under CE
UL listed

The RocketLinx ES8105F-M-XT is a compact 4-port Fast Ethernet switch with one 100BASE-FX fiber port, featuring a 3.2Gbps switch fabric with Store and Forward technology and housed in a slim industrial enclosure to save rail or panel space in compact system designs.

For installation in hazardous or industrial environments, the RocketLinx ES8105F-M-XT features an extended operating temperature range (-40° to 75° C), has CID2 certification, and provides IP31 protection to guard against dust and water.

The ES8105F-M-XT is an unmanaged switch that requires no user setup and immediately starts operating as soon as power is applied for true “plug-and-play” operation. The RocketLinx ES8105F-M-XT supports 18 to 27VAC or 18 to 32VDC power inputs and provides built-in reverse power polarity protection.

For ease-of-maintenance, the RocketLinx ES8105F-M-XT has one alarm relay that is controlled by a DIP switch to assist engineers with onsite notifications in the case of link-down events.

RocketLinx Reliability

With the CE/FCC/UL regulatory approvals, extended temperature ratings, 5-year warranty, CID2 certification, and rugged aluminum design, the RocketLinx ES8105F-M-XT is the ideal switch solution for industrial and hazardous environments.

Hardware

Bus Interface Specification10/100BASE-TX, 100BASE-FX
EnclosureIP31 Grade Aluminum Metal Case
Drop-Waterproof and Dustproof
InstallationDIN rail
LED IndicatorsPower, Alarm, 10Mbps Link/Activity, 100Mbps Link/Activity, Fiber port link/activity
Dimensions3.9" x 1.2" x 4.4"
99 x 30.5 x 112 mm
Product Weight0.65 lbs
0.295 kg

Technology

StandardIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3u 100BASE-FX
Switch Technology3.2Gbps switch fabric
Store and forward technology
Aggregate System Throughput1.49Mbps
Flow ControlIEEE 802.3x Flow Control

Ethernet Specifications

Connector TypeRJ45
Number of Ports4
Ethernet Cable TypeCat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)
Link Distance100 Meters
Port Type10/100BASE-TX
Auto MDI/MDIX, auto-negotiation
Port Failure AlarmYes
DIP switch enabled
Relay Rating1A Max. @ 24VDC

Optical Fiber Specifications

Fiber ModeMulti
Wavelength1310nm
Connector TypeDuplex SC
Number of Ports1
Fiber Cable Type50/125um or 62.5/125um
Link Distance (Max)2KM
Transmit Power (Min)-20dBM
Transmit Power (Max)-14dBM
Receive Sensitivity (Min)0
Receive Sensitivity (Max)-31dBM
Link Budget11dBM

Electrical Specifications

Device
- Power InputAC or DC
- DC Input Voltage18 to 32VDC
- Current Consumption (+24VDC)170mA
- AC Input Voltage18 to 27VAC
  47 to 63Hz
- Power Consumption (Max)4W
Power Connector1
Power Connector Type4-Pin Screw Terminal Block
Reverse Polarity ProtectionYes

Environmental Specifications

Air Temperature
- System On-40° to 75° C
- System Off-40° to 85° C
Operating Humidity (Non-Condensing)0% to 95%
Storage Humidity0% to 95%
MTBF (Mean Time Between Failures)TBD

Export Information

Packaged Shipping Weight0.90lbs
0.41 kg
Package Dimensions6.0" x 2.5" x 5.0"
152 x 63.5 x 127 mm
UPC Code7-56727-32029-6
ECCN5A991
Schedule B Number8517.62.0050

Regulatory Approvals

EmissionsEuropean Standard EN55055
CISPR 22
FCC Part 15 Subpart B
Class B limit
ImmunityEuropean Standard EN55024:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6:Conducted Distrubance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
IEC 1000-4-6/EN61000-4-11: DIPS and voltage Variations
SafetyUL 508 Class I Div 2*
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950 Third edition
Other Regulatory ApprovalsRoHS 2 compliant under CE

EXS-EX-50875 895,50 �

Mon, 22 Dec 2014 18:30:05 +0100

CN2510-8(US/EU/UK) - 8 port Async Server, 10/100Mbps Ethernet, RS-232 230.4 Kbps, RJ45, 15 KV ESD protection

CN2510 Series 8 and 16-port RS-232 terminal servers

Features and Benefits

LCM interface for easy on-site management
In-band and out-of-band console management of both networked and non-networked devices
Stand-alone Remote Access Server for up to 16 dial-in users
PPP/SLIP with RADIUS authentication and RIP I/II Routing protocol
Real COM/TTY driver for Windows and Linux
±48 VDC for Telecom Applications

Overview

Remote Device Console Management

For most companies, the performance of IT equipment plays a decisive role in daily operation. To keep a server, router, PBX, or leased line modem working properly, least downtime and instant troubleshooting are important. For many IT devices, a KVM switch is used to manage the device with a keyboard and monitor located next to the device. However, an RS-232 console port—something which most IT devices have—can be used for Remote Console Management.

CN2510 provides an easy-to-use console port management solution that comes in a convenient 1U rack-mountable size. CN2510 can easily establish a console management environment with servers, routers, and other network equipment. CN2510 turns the RS-232 console port of the device into a network-accessible node, allowing you to use Telnet to configure and manage the device from anywhere on the network.

In-Band and Out-of-Band Network Management

In-Band Network Management refers to using Telnet over a network, such as an office LAN or the Internet, to open a connection to a device that has a console port. By connecting the RS-232 console port to one of CN2510's serial ports, you can access the device over the network with a specific IP:Port combination. This type of setup allows you to monitor and manage devices that have an RS-232 console port from any network host over an Ethernet or Wireless LAN network.

Out-of-Band Network Management refers to when an alternate path for remote access, such as a dial-up line or ISDN line, is used to reach network devices. Out-of-Band Network Management is needed when you're unable to reach the device via the network connection, such as when the network is down. Another situation for which Out-of-Band network management is needed is when the device itself crashes. For example, many web servers can be managed directly via the server's Ethernet port, or through the server's console port. If the server crashes, you won't be able to access the server using the preferred "over the network" method. However, the server will still be accessible via its RS-232 console port, allowing the manager to reboot the server and get it back online.

Stand-alone RAS Service

CN2510 supports PPP/SLIP dial-up ports, letting you connect to your network devices from a remote site. Even when you are away from the office, you will still have full control of all devices in your company's server room.

From a hardware point of view, CN2510 is easy to install, and is complemented by powerful software features, which include security, authorization, IP routing, and management functions that provide MIS personnel with a simple and convenient way to monitor and control target devices located in a data center or control room.

Available Models

	Model No.	Description
	CN2510-16	16-port RS-232 Async Server, 100 to 240 VAC power input
	CN2510-16-48V V2	16-port RS-232 Async Server, +/-48 VDC power input
	CN2510-8	8-port RS-232 Async Server, 100 to 240 VAC power input
	CN2510-8-48V V2	8-port RS-232 Async Server, +/-48 VDC power input

COM-1200047 25,35 �

Wed, 01 Aug 2018 18:28:41 +0200

1200047 DB9F to RJ45 Adapter Kit, 4 Pieces

Part Number: 1200047

This kit contains four DB9F to RJ45 adapters for facilitating connection of RJ45 cabling to DeviceMaster DB9 products.

This adapter kit works with Comtrol’s DeviceMaster and RocketPort product families.

System Specifications

Hardware

HousingGray Plastic Housing
ConnectorsDB9 Female
RJ45 Female
Product Dimensions2.1" x 1.3" x 0.6"
5.33 x 3.3 x 1.52 cm
Product Weight0.15 lbs
68.04 g

Features

Warranty5 Years

Export Information

Packaged Shipping Weight0.15lbs
68.04 g
Package Dimensions6" x 4"
15.24 x 10.16 cm
Country of OriginUSA
ECCNEAR99
Schedule B Number8535.90.8020

COM-30300-8 8,45 �

Mon, 23 Apr 2018 19:09:33 +0200

30300-8 DB9 Female to DB25 Female Adapter Kit

Part Number: 30300-8

The RocketPort DB9F to DB25F adapter kit can be used to convert DB9M connections to DB25F. Each adapter kit contains four adapters with thumb screws. The adapters are RoHS compliant. This adapter kit takes the standard DB9 connection on the RocketPort INFINITY/EXPRESS interfaces and changes it to a DB25 connection.

System Specifications

Hardware

Dimensions 2.35" x 2.20" x 0.59" (5.97 x 5.59 x 1.5 cm)
Export Information
- Packaged Shipping Weight 0.44 lbs (199.58 g)
- Package Dimensions 8.00" x 0.7" x 5.00" (20.32 x 17.78 x 12.7 cm)
- UPC Code 7-56727-30300-8

COM-1200054 125,90 �

Thu, 03 May 2018 18:19:30 +0200

1200054 Power over Ethernet Splitter (24VDC, 24 Watts)

BET-FEC-050C 288,00 �

Thu, 04 Apr 2013 19:14:02 +0200

B&E Technologies FE-050C

100FX Fiber Fast Ethernet Adapter for PCI Bus

The 10/100BASE-TX to 100BASE-FX media converter series provides a media conversion allowing high-speed integration of fiber optic and twisted pair segments. With 10BASE-T and 100BASE-TX support, the converters provide seamless translation between Ethernet and Fast Ethernet networks. A complete set of LEDs allows for quick status verification.
Converter Features
Convert speed and media type
Support full wire speed conversion
Support 10Mbps and 100Mbps speed on TP connections
Auto MDI/MDI-X detection function on the TP port
Auto-negotiation function on the TP port
Link fault pass through function
Provide manual configuration settings for TP port to support connection to non-auto negotiation devices
Transparent to 802.1Q VLAN tagged packets
Far End Fault function on FX port
Provide LED status display for remote TP port monitoring
Provide Loop Back Test function for installation diagnostics
Support wide range of fiber options on the FX port
Low power consumption

Operating Environment
Operating Input Voltages:	+4.75V ~ +12.6V
Power consumption:	2W max. (0.27A@+7.5V)
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-20°C to 85°C
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Warranty	2 years

BET-FEC-050T 288,00 �

Thu, 04 Apr 2013 19:14:02 +0200

B&E Technologies FE-050T

100FX Fiber Fast Ethernet Adapter for PCI Bus

The 10/100BASE-TX to 100BASE-FX media converter series provides a media conversion allowing high-speed integration of fiber optic and twisted pair segments. With 10BASE-T and 100BASE-TX support, the converters provide seamless translation between Ethernet and Fast Ethernet networks. A complete set of LEDs allows for quick status verification.
Converter Features
Convert speed and media type
Support full wire speed conversion
Support 10Mbps and 100Mbps speed on TP connections
Auto MDI/MDI-X detection function on the TP port
Auto-negotiation function on the TP port
Link fault pass through function
Provide manual configuration settings for TP port to support connection to non-auto negotiation devices
Transparent to 802.1Q VLAN tagged packets
Far End Fault function on FX port
Provide LED status display for remote TP port monitoring
Provide Loop Back Test function for installation diagnostics
Support wide range of fiber options on the FX port
Low power consumption

Operating Environment
Operating Input Voltages:	+4.75V ~ +12.6V
Power consumption:	2W max. (0.27A@+7.5V)
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-20°C to 85°C
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 90% (non-condensing)

Warranty	2 years

BET-FES-505C 374,00 �

Thu, 04 Apr 2013 19:14:02 +0200

B&E Technologies FES-505C

Fast Ethernet Switches with one Fiber Connection

This 5-port Fast Ethernet switch series provides four 10/100 TP ports and one 100BASE-FX fiber port, each capable of transmitting or receiving information simultaneously at full wire speed to control and allocate the network bandwidth. These devices are intended for use with multimode fiber optic cabling, and operate at a wavelength of 1300nm.
Switch Features
Providing 4 10/100Mbps Fast Ethernet Switch ports and 1 100Base-FX port
Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
For the 100Base-FX fiber port, the switch can be ordered with ST or SC connectors (model FES-505T or FES-505C, respectively).
Support duplex mode selector for the 100BASE-FX fiber port.
Self learning for active MAC addresses and address aging
Store-and-forward switching to ensure only good packets are forwarded
Forwarding and filtering at full wire speed
Supports IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half-duplex mode
Comprehensive LED indicators provide quick, easy to read port and switch information

Operating Environment
DC IN Voltage:	+6.0V ~ +12.6VDC (Device DC Input)
Consumption:	DC input power consumption 3.9W @+7.5V
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-40°C to 70°C
Operating Humidity:	10% to 90% (non-condensing)

Physical Specifications
LED indicators: Power status, Per port : Speed, Link, Activity, Duplex, Collision status
Dimensions: 144 mm x 104.5 mm x 26 mm (WxDxH) (5.67 x 4.11 x 1.02 inch)

Warranty	2 years

BET-FES-505T 374,00 �

Thu, 04 Apr 2013 19:14:03 +0200

B&E Technologies FES-505T

Fast Ethernet Switches with one Fiber Connection

This 5-port Fast Ethernet switch series provides four 10/100 TP ports and one 100BASE-FX fiber port, each capable of transmitting or receiving information simultaneously at full wire speed to control and allocate the network bandwidth. These devices are intended for use with multimode fiber optic cabling, and operate at a wavelength of 1300nm.
Switch Features
Providing 4 10/100Mbps Fast Ethernet Switch ports and 1 100Base-FX port
Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
For the 100Base-FX fiber port, the switch can be ordered with ST or SC connectors (model FES-505T or FES-505C, respectively).
Support duplex mode selector for the 100BASE-FX fiber port.
Self learning for active MAC addresses and address aging
Store-and-forward switching to ensure only good packets are forwarded
Forwarding and filtering at full wire speed
Supports IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half-duplex mode
Comprehensive LED indicators provide quick, easy to read port and switch information

Operating Environment
DC IN Voltage:	+6.0V ~ +12.6VDC (Device DC Input)
Consumption:	DC input power consumption 3.9W @+7.5V
Operating Temperature:	-5°C to 40°C
Storage Temperature:	-40°C to 70°C
Operating Humidity:	10% to 90% (non-condensing)

Physical Specifications
LED indicators: Power status, Per port : Speed, Link, Activity, Duplex, Collision status
Dimensions: 144 mm x 104.5 mm x 26 mm (WxDxH) (5.67 x 4.11 x 1.02 inch)

Warranty	2 years

BET-FES-517 239,00 �

Thu, 04 Apr 2013 19:14:03 +0200

B&E Technologies FES-517

10/100 Fast Ethernet Switch 16TX/1FX with Management

The FE-517 is the latest in our family of Fast Ethernet switches. It is a 16 port switch with a port for an optional 2km fiber optic link. Automatic cable detection on each port allows all ports to select 10Mbps or 100Mbps and MDI (crossover) or MDI-X (straightthrough) cabling. The built in management interface allows VLAN, QoS, trunking and port configuration. The CT-FE517 remains an affordable solution for your network and includes a full two year warranty.
Switch Features
10 or 100Mbps transmission rate
Full or half duplex (full duplex required for maximum transmission distances on the fiber optic port)
Switch Type: Store and Forward
Filtering Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
Forwarding Rate: 14,880pps for Ethernet (10base-T) 148,800pps for Fast Ethernet (100TX)
QoS: 4 queues per port
Filtering Address: Multicast/Broadcast/Unicast address 2K MAC addresses per unit
VLAN: up to 15 VLAN groups
Supports trunking, which allows the connection of multiple ports to other switches to increase bandwidth between switches:
-Two-port trunks: Up to 2 trunks
-Bandwidth: 400 Mbps full duplex per trunk
Management / configuration via built-in RJ-45 serial port (cable provided) and a standard terminal emulator

Operating Environment
Power:	100-240VAC, 50/60Hz,15W max
Operating Temperature:	0ºC to 50ºC
Storage Temperature:	-40ºC to 70ºC
Operating Humidity:	10% to 90% (non-condensing)
Storage Humidity:	5% to 95% (non-condensing)

Available Fiber Modules
FESM-517-MT Multi-mode with ST connector
FESM-517-MC Multi-mode with SC connector
FESM-517-SC Single-mode with SC connector

Physical Specifications
Rack or Table mountable chassis
LED indicator for power and for each port
Link/Act.:	Indicates the link status with a connected device as well as the connection speed between the UTP port and the connected device.
FDX/Col.:	Indicates the duplex mode and collision occurrences.
Dimensions:	430mm x 105mm x 44mm (WxDxH) (16.9" x 4.13" x 1.73")

Conforms to the Following Standards
LAN:	IEEE 802.3u 100base-TX
	IEEE 802.3u 100base-FX
	IEEE 802.3 10base-T
EMC:	EN55022 IEC1000-4-2
	EN60555-2 IEC1000-4-3
	EN60555-3 IEC1000-4-4
Products are marked as certified to the CE and FCC standards.

Installation Considerations
100FX FAST ETHERNET
Fiber Optic Cable	62.5/125µm 1300nm multimode fiber optic cable is recommended
	50/125µm, 85/125µm or 100/140µm 1300nm multimode fiber optic cable can also be used
	Modules available in multimode dual ST connectors (CT-FE052T) or multimode dual SC connectors (CT-FE052C)
	Distance from port to port: 2km (1.25 miles)

100TX FAST ETHERNET
Twisted Pair Cable	Category 5 unshielded twisted pair
	RJ-45 connector
	Distance from port to port: 100m (325 ft)

10base-T ETHERNET
Twisted Pair Cable	Category 3, 4 or 5 unshielded twisted pair
	RJ-45 connector
	Distance from port to port: 100m (325 ft)

Warranty	2 years