SWD.de/+ Manufacturer +/Hilscher GmbH/HIL-CC-Link Hardware products

HIL-CIF104-CCS 0,00 �

Tue, 22 Jan 2019 22:12:13 +0100

CIF 104-CCS

Communication Interface PC/104
CC-Link-Slave

The CIF 104-CCS interface card is a PC/104 card for use in PC-based controls which are used directly in the automation level. Drivers for Windows, Linux and QNX are available.

Facts at a glance:

Fast "Time to Market"
Cheaper than own development
Easy to configure
MFP3 technology

Product		CIF 104-CCS
Description		Communication Interface PC/104 CC-Link-Slave


Device type		Remote Device Station
Transmission rate		156 kbps / 625 kbps / 2,5 Mbps / 5 Mbps / 10 Mbps
Interface		RS-485, potential free
LED display		RDY, RUN, STA, ERR
Operating voltage		5 V ±5% / 500 mA
Dimensions (LxWxH)		90 x 96 x 25 mm
Operating temperature		0 °C ... 50 °C
EMC		Immunity EN 61000-6-2 Industrial Environment Emission EN 61000-6-4 Class A

HIL-CIF50-CCS 0,00 �

Sun, 20 Jan 2019 14:35:24 +0100

CIF 50-CCS

Communication Interface PCI
CC-Link-Slave

With the cifX communication interface, the user will have a unified standard for all Real-Time Ethernet and Fieldbus systems on different hardware platforms.
The complete protocol stack will be exectued on the PC card and data exchange to the host will be done via Dual-Port-Memory or DMA. Hilscher offers the cifX PC communication cards with PCI, PCI Express, Mini PCI, Mini PCI Express, PCI-104, PC/104, Compact PCI and Low Profile PCI Express interface. With a rotary switch an easy and reliable slot assignemt can be done for the PCI and PCI Express types.

A complete software package including a single FDT/DTM based configuration tool for all products and networks, documentation, loadable firmware and driver tool-kit is always in the scope of delivery.

Due to the own network controller netX a 10-years delivery is guaranteed.

Facts at a glance:

Fast "Time to Market"
Cheaper than own development
Easy installation and configuration
MFP3 technology

Product		CIF 50-CCS
Description		Communication Interface PCI CC-Link-Slave


Card format		PC
Bus interface		PCI
Dual-Port-Memory		8 KByte
Interrupt		3-7, 9-12, 14, 15 via plug and play
CC-Link Communication
Type		Slave, Remote Device Station
Stations		max. 4
Input data		max. 128 bits, max. 16 words (with 4 stations)
Output data		max. 128 bits, max. 16 words (with 4 stations)
Connection		Polling
CC-Link interface
Transmission rate		156 kbps / 625 kbps / 2.5 Mbps / 5 Mbps / 10 Mbps
Controller		MFP3
Interface		EIA Standard RS-485, potential free
Connector		Combicon male connector 5 pin
Diagnostic Interface		RS232C, non-isolated
Connector		via square post connector 10 pin
Display		RDY, RUN, STA, ERR
Operating voltage		3,3 V ±5 % / 1410 mA 5 V ±5 % / 580 mA
Operating temperature		0 °C ... 50 °C
Dimensions (LxWxH)		134 x 107 x 20 mm
Weight approx.		86 g
CE sign		Yes


In scope of delivery		Device driver Windows DRV-WIN Device driver Linux DRV-LNX C functions library, toolkit DRV-TKIT Documentation on CD-ROM CD-SYS-SLV
Related products		Service cable CAB-SRV Cable CAB-PM15 Device Driver Windows DRV-CE Driver DRV-QNX

HIL-COM-CA-CCS 0,00 �

Sun, 20 Jan 2019 14:35:24 +0100

COM-CA-CCS

Communication Module CA-Type
CC-Link-Slave

The COM-CA-CCS and COM-CN-CCS communication modules are meant for integration into field devices or programmable controllers. Via a Dual-port-memory access, these modules can be integrated directly into the application program.

Facts at a glance:

All major Fieldbus and Real-Time Ethernet protocols as Master and Slave
Dual-Port-Memory with 8/16 bit data bus to the host
Single hardware for all Real-Time Ethernet protocols
Low-Cost variants with address switch and fast SPI for Fieldbus Slave
Complete communication device including network specific connection
PROFINET IRT device with fiber-optics pursuant AIDA
Ready to use, due to preloaded firmware
One design for all networks due to consistent interfaces and tools
Integrated Web-Server

Product		COM-CA-CCS
Description		Communication Module CA-Type CC-Link-Slave
Related products		C functions library, toolkit DRV-TKIT


Card format		COM-C
Bus interface		Dual-Port-Memory
Dual-Port-Memory		8 KByte
Interrupt		Yes
Connector		Female strip connector 2x25-pin, grid 1.27
CC-Link Communication
Type		Slave, Remote Device Station
Stations		max. 4
Input data		max. 128 bits, max. 16 words (with 4 stations)
Output data		max. 128 bits, max. 16 words (with 4 stations)
Connection		Polling
CC-Link interface
Transmission rate		156 kbps / 625 kbps / 2.5 Mbps / 5 Mbps / 10 Mbps
Controller		MFP3
Interface		EIA Standard RS-485, potential free
Connector		Combicon male connector 5 pin
Diagnostic Interface		TLL, non-isolated
Connector		via female strip connector
Display		SYS, COM
Operating voltage		3,3 V ±5 % / 450 mA
Operating temperature		0°C-60 °C
Dimensions (LxWxH)		70 x 30 x 20 mm
Weight approx.		35 g
CE sign		Yes

HIL-COM-CN-CCS 0,00 �

Sun, 20 Jan 2019 14:35:24 +0100

COM-CN-CCS

Communication Module CN-Type
CC-Link-Slave

The COM-CA-CCS and COM-CN-CCS communication modules are meant for integration into field devices or programmable controllers. Via a Dual-port-memory access, these modules can be integrated directly into the application program.

Facts at a glance:

All major Fieldbus and Real-Time Ethernet protocols as Master and Slave
Dual-Port-Memory with 8/16 bit data bus to the host
Single hardware for all Real-Time Ethernet protocols
Low-Cost variants with address switch and fast SPI for Fieldbus Slave
Complete communication device including network specific connection
PROFINET IRT device with fiber-optics pursuant AIDA
Ready to use, due to preloaded firmware
One design for all networks due to consistent interfaces and tools
Integrated Web-Server

Product		COM-CN-CCS
Description		Communication Module CN-Type CC-Link-Slave


Card format		COM-C
Bus interface		Dual-Port-Memory
Dual-Port-Memory		8 KByte
Interrupt		Yes
Connector		Female strip connector 2x25-pin, grid 1.27
CC-Link Communication
Type		Slave, Remote Device Station
Stations		max. 4
Input data		max. 128 bits, max. 16 words (with 4 stations)
Output data		max. 128 bits, max. 16 words (with 4 stations)
Connection		Polling
CC-Link interface
Transmission rate		156 kbps / 625 kbps / 2.5 Mbps / 5 Mbps / 10 Mbps
Controller		MFP3
Interface		EIA Standard RS-485, potential free
Connector		Female strip connector 2x15-pin, grid 1.27
Diagnostic Interface		TLL, non-isolated
Connector		via female strip connector
Display		SYS, COM
Operating voltage		3,3 V ±5 % / 450 mA
Operating temperature		0°C-60 °C
Dimensions (LxWxH)		70 x 30 x 20 mm
Weight approx.		24 g
CE sign		Yes


Related products		Device driver Windows DRV-WIN Device driver Linux DRV-LNX C functions library, toolkit DRV-TKIT Device driver Windows CE