SWD.de/+ Manufacturer +/Kollewin Technology Co., Ltd./KOL-Mitsubishi FX & Q PLC Adapter, Cable for Mitsubishi andMitsubishi Q PLC products

KOL-ES-ETH-SC09 204,00 �

Tue, 22 Jul 2014 09:44:28 +0200

ES-ETH-SC09:Mitsubishi FX series PLC Ethernet adapter

Mitsubishi FX series PLC Ethernet adapter,is used for the communication between FX series PLC and Ethernet,Internet or 3G wireless network by the programming interface.No need to revise the communication protocol and software,support Dynamic DNS,user can remote control the PLC by the internet. The RJ45 port and RS422 interface are isolated in order to suit harsh environment in the industrial scene.

ES-ETH-SC09 is the industrial product which use the Ethernet and Internet or 3G wirelss internet to achieve Mitsubishi FX series PLC networking communication It integrates a number of complex network protocols, supports TCP Server, TCP Client, UDP unicast, UDP multicast etc many modes,.It has 10M/100M adaptive Ethernet interface and RS422 interface which meets Mitsubishi technical specifications, You only need to go on simple setting and then let the FX PLC go on Ethernet/Internet communication.

Mitsubishi FX Series PLC refers to FX0/FX0S/FX0N/FX1N/FX2N/FX3U/FX3G ... .... .

ES-ETH-SC09 is an industrial grade product, its RJ45 port and RS422 interface are both isolated in order to suit harsh environment in the industrial situations. Especially each signal pin has anti-static protection and surge protection, which can effectively protect the PLC communication port from outside surges and the impact of common-mode inductance.

Notice:when the ES-ETH-SC09 is used to communicate between the PC and the FX series PLC or between PLC and PLC, it supports the RS422/RS485/RS232 communication which meet UART serial data communication standard. Some field buses such as PROFIBUS, PPI, MPI, CC-Link, PC-Link, etc., although the physical interface is RS485, they do not comply with the UART serial data format, so they do not apply to this product!
◆ High-speed, highly reliable industrial-grade standard, anti-interference design for harsh electromagnetic environment

◆ 32 bit RISC (NP7 series) ARM7TDMI 55DMIPS

◆ 128KB SRAM，128KB Code + 32KB Boot

◆10M/100M adaptive Ethernet interface

◆Support RS422/RS485 data bits 5,6,7,8 settable

◆Support RS422/RS485 stop bit 1,1.5,2 settable
◆Support RS422/RS485 parity NONE, ODD, EVEN, MARK, SPACE settable
◆Support RS422/RS485 baud rate 110 ~ 115200bps standard rate settable
◆Support the RS422/RS485 communications which meet UART serial data communication standard, do not support field bus protocol.
◆Smart protocols: TCP, UDP, ARP, IP, ICMP, DHCP, BOOTP, DNS

◆Support dynamic DNS
◆Working mode can be TCP Server, TCP Client, UDP multicast and unicast UDP

◆Built-in Flash memory, can save the setted parameters
◆Support Windows 95/98/ME/NT/2000/XP/2003/XP/Win7 operating system, Vista is not recommended
◆RJ45 port 1500VDC electromagnetic isolated,RS422 interface 1500VDC electromagnetic isolated,
◆Interface protection: power supply port has the reverse polarity protection and over current protection, RS422 interface has the surge protection ;all pins and terminals have anti-static protection.
◆5V±10% DC power supply from FX series PLC RS422 socket,1W power
◆Dimension: L × W × H = 65mm × 51mm × 26mm, 35mm Standard rail mounting
◆Operating Temperature: -40 ° C to +80 ° C (-40 ° F to 176 ° F), 5% to 95% RH (industrial grade)
◆Storage Temperature: -40 ° C to +80 ° C (-40 ° F to 176 ° F), 5% to 95% RH

Product Content:
1.ES-ETH-SC09 1PC
2. RJ45 Cable 1 PC,2 M
3.CD 1PC

KOL-QC30R2 24,00 �

Sun, 13 Oct 2013 20:46:57 +0200

QC30R2:Programming Cable for Q-PLC, 3 Meters

RS232/RS232 interface,cable for Mitsubishi Q series PLC,3 meters.Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose QC30R2+,you can click the following website for QC30R2+:

KOL-QC30R2+

The quality is guaranteed.It's tested before shippment.Not made by Mitsubishi,OEM product as the replacement.

KOL-QC30R2+ 170,00 �

Thu, 04 Apr 2013 19:22:20 +0200

Optical isol. RS232/RS232 interface, cable for Mitsubishi Q series PLC, 4,5m

KOL-SC-09+ 170,00 �

Thu, 13 Mar 2014 17:06:51 +0100

SC-09+:optoelectronic isolated SC-09 interface

Before using this interface unit , be sure to read this OPERATING INSTRUCTIONS thoroughly to ensure proper operation.

This unit is the dedicated specified cable to connect the personal computer to the MITSUBISHI ELECTRIC MELSEC-PC or FUJI ELECTRIC FLEX-PC N-series.

The Personal Computer side :

. IBM AT personal computer or 100% compatible

. MS-DOS version 3.2 or higher

. 640KB RAM

. min. 10MB Hard Disk

. RS232C Serial port

Software Package :

. MEDOC/SFC/FX-MING for MITSUBISHI ELECTRIC MELSEC-PC

The Programmable Controller side :

For PC/PERSONAL COMPUTER communication,the following external equipment is required :

For MITSUBISHI ELECTRIC MELSEC-PC:

FX2 / FX2C... ---- SC-09+

FX0 / FX0s / FX0n / FX2n ... ---- SC-09+ and FX-20P-CADP

A series ---- SC-09+

General Specifications :

Cooling method : Self-cooled
Operating temperature and humidity : -15 oC to 75 oC, 20% to 95%(RH) (no condensation)
Storage temperature : -30 oC to +85 oC
Power supply : Non-powered
Max. Speed : 110Kbps
Max. Line length : 2km(9600bps) using gauge wire
Isolated voltage: 2.5kV
Weight : Approx . 150g
Cable length : 2m

The quality is guaranteed.It's tested before shippment.Not made by? Mitsubishi,OEM product as the replacement.

KOL-SC-09-BIC 55,00 �

Thu, 04 Apr 2013 19:22:20 +0200

Mitsubishi RS232/422 interface, 3m, standard programming cable for all Mitsubishi MELSEC FX and A series PLC, black one w IC

KOL-SC-09-noIC 24,00 �

Thu, 04 Apr 2013 19:22:21 +0200

Mitsubishi RS232/422 interface, 3m, standard programming cable for all Mitsubishi MELSEC FX and A series PLC, injection moulding cheap w/o IC

KOL-SC-09-red 76,00 �

Tue, 14 Apr 2020 14:22:34 +0200

Mitsubishi SC-09-red

Mitsubishi

SC-09:red Standard programming cable for FX and A series PLC's

Red Standard programming cable for all MELSEC FX and A series PLC's.
RS232/RS422 Connector,3 meters length
with indicator,copy original one

Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose SC-09+

KOL-SC-10 170,00 �

Sun, 13 Oct 2013 21:15:04 +0200

SC-10:PLC remote communication with modem

Go on long-distance communication for FX series(FX2/FX2n/FX0/FX0n..) with modem connecting telephone wire,the other function is the same as SC-09.

The quality is guaranteed. New, tested 100%,Not made by Mitsubishi,OEM product as the replacement.

KOL-USB-QC30R2 65,00 �

Thu, 13 Mar 2014 17:13:55 +0100

USB-QC30R2:USB/RS232 interface,cable for Mitsubishi Q PLC

USB-QC30R2 is the programming cable in which USB interface provides both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

USB-QC30R2 is applicable to Mitsubishi Q series PLC (Q mode)

USB-QC30R2 principle and figure structure:

USB-QC30R2 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(GX Developer) to communicate through simulated traditional port and PLC devices.

Features and technological index:

● Support USB-QC30R2 operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
● Support USB-QC30R2 programming software version: GPP V4.0, GX Developer V7.0 and above
● Fully compatible with USB 2.0 standard
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
● Color: black

Usage:

USB device drivers should be installed before using USB-QC30R2programming cable. After completing Driver installation, the corresponding COM port for the USB-QC30R2 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Long-distance communications:

USB-QC30R2 programming cable does not support long-distance communications.

Please Note: USB interface cable cannot be extended.

The quality is guaranteed.It's tested before shippment.Not made by Mitsubishi,OEM product as the replacement.

KOL-USB-SC09 65,00 �

Sun, 14 Jun 2020 10:20:34 +0200

USB-SC09:USB/RS422 interface,cable for Mitsubishi FX & A series

Introduction

USB-SC09 is the programming cable in which USB interface provides both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

USB-SC09 principle and figure structure:

USB-SC09 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(GX Developer) to communicate through simulated traditional port and PLC devices.

Features and technological index:

● Support USB-SC09 operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
● Support USB-SC09 programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
● Color: black

Usage:

USB device drivers should be installed before using USB-SC09 programming cable. After completing Driver installation, the corresponding COM port for the USB-SC09 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Note: DB25M plugs and MD8M plugs of the RS422 interface can not be used at the same time.

The quality is guaranteed.It's tested before shippment.

KOL-USB-SC09-FX 50,00 �

Thu, 02 Dec 2021 14:18:08 +0100

USB-SC09-FX:USB/RS422 interface,cable for Mitsubishi FX series

Summary:

USB-SC09-FX is the programming cable in which USB interface provided both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

USB-SC09-FX is applicable to the FX series PLC which has the MD8F radio socket of Mitsubishi, such as FX2N/FX1N/FX0/FX0N/FX0S/FX1S/FX3U, and it can substitute the FX-232AW module. The largest communications distance is two kilometers.

Do choose the USB-SC09 programming cable, for A and all FX series Mitsubishi PLC (including the old products FX2/FX2C).

Outline configuration:

Features and technological index:

● Support USB-SC09-FX operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
● Support USB-SC09-FX programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Support long-distance communications, the largest communications is two kilometers (9600 bps)
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
● Cable length: 2.5m; Color: black

Usage:

USB device drivers should be installed before using USB-SC09-FX programming cable.

After completing Driver installation, the corresponding COM port for the USB-SC09-FX programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Long-distance communications:

The largest communications range between the USB-SC09-FXprogramming cable and the PLC is up to two kilometers (9600 bps)。The user must follow the self-made plans to extend cable. Transmission Line should be 0.22mm2 or more, twisted pair wire. When the distance is over 2,000 m , RS422 repeater (model: E485GA)could be installed to extend the distance.

Please Note: USB interface cable cannot be extended.

Due to internal resistance have been installed in USB-SC09-FX and the PLC, no external terminal resistance is needed.

The quality is guaranteed.It's tested before shippment.Not made by Mitsubishi,OEM product as the replacement.

KOL-FX3G-40MR/ES 695,00 �

Fri, 11 Jun 2021 12:02:15 +0200

FX3G-40MR/ES

SWD.de/+ Manufacturer +/Kollewin Technology Co., Ltd./KOL-Mitsubishi FX & Q PLC Adapter, Cable for Mitsubishi andMitsubishi Q PLC products

KOL-ES-ETH-SC09 204,00 �

ES-ETH-SC09:Mitsubishi FX series PLC Ethernet adapter

KOL-QC30R2 24,00 �

QC30R2:Programming Cable for Q-PLC, 3 Meters

KOL-QC30R2+ 170,00 �

KOL-SC-09+ 170,00 �

SC-09+:optoelectronic isolated SC-09 interface

KOL-SC-09-BIC 55,00 �

KOL-SC-09-noIC 24,00 �

KOL-SC-09-red 76,00 �

SC-09:red Standard programming cable for FX and A series PLC's

KOL-SC-10 170,00 �

SC-10:PLC remote communication with modem

KOL-USB-QC30R2 65,00 �

USB-QC30R2:USB/RS232 interface,cable for Mitsubishi Q PLC

KOL-USB-SC09 65,00 �

USB-SC09:USB/RS422 interface,cable for Mitsubishi FX & A series

KOL-USB-SC09-FX 50,00 �

​USB-SC09-FX:USB/RS422 interface,cable for Mitsubishi FX series

KOL-FX3G-40MR/ES 695,00 �

USB-SC09-FX:USB/RS422 interface,cable for Mitsubishi FX series