SWD.de/+ Manufacturer +/Kollewin Technology Co., Ltd./KOL-SCHNEIDER PLC Adapter, Cable for Schneider PLC products

KOL-TSXFPCG010 195,00 �

Tue, 12 Apr 2016 16:24:29 +0200

Schneider TSXFPCG010 Interface Module FIP/PCMCIA

PN: TSXFPCG010

Schneider Electric
Interface Module

FIP/PCMCIA
Cord Length: 1M
PV: 02
UPC Number: 3 389110 525502
052550

KOL-TSX08PRGCAB 86,00 �

Thu, 06 Mar 2014 15:19:25 +0100

TSX08PRGCAB:RS232/RS485 cable for Schneider PLC programming

RS232/RS485 interface cable for Schneider PLC programming,3 meters,with master/slave switch,used for programming communication or other communication such as MODBUS.

The quality is guaranteed.It's tested before shippment.Not made by Schneider,OEM product as the replacement.

Summary:

TSX08PRGCAB (also known as TSXPCX1031) is the programming cable which is provide connection and the RS485 signal converter through the RS232 serial interface.The power of the cable is from the TER port of the PLC. TSX08PRGCAB can be used for Modicon

TSX Series PLC of Schneider and PC or other equipment which provide the traditional RS232 serial port communications. The cable can communicate with TER interface of TSX Premium (57), TSX Micro (37), TSX Nano (07), TSX Naza (08) Twido PLC, and to realize the procedures to upload, download, surveillance and other function such as multi-point communication of MODBUS.

Since the AUX port of the PLC have no power output pins, TSX08PRGCAB can not use this port.

The snap switch located on the TSX08PRGCAB programming cable are used to choose a different mode of operation. The cable rejected the way which the transceivers of the RS485 is controlled by the PLC, and all the data transceivers is automatic controlled. It can be used for multi-point and point-to-point communications applications.TER ports of the TSX Series PLC have a DPT signal pin, which is used to determine the work methods of the terminal TER. If the DPT for high-level, TER always work in the Uni-Telway Master (main station) mode, so the PLC programming in the corresponding way. If the DPT for low-level, the work methods of TER decide by the PLC.

Switch	Function	DPT level	the Control flow of data
M	PLC works in main-station model for programming or as Uni-Telway Master for more points communications	1	auto
S	PLC works in slave-station model for other multi-point communication	0	auto

Features and technological index:

● Power supply by the TER port of the PLC, current consumption is about 30 mA

● Baud rate: 300 bps ~ 230.4Kbps automatically adaptive

● RS232 port and RS485 port of cable with both Inrush protection and anti-static protection of ± 15kV

● Apply to the TSX Premium, Micro, Naza, Nano and Twido Series PLC

● Cable length: three meters, colors: black

Usage:

TSX08PRG connect with computer and communicate with Schneider PLC need to install Uni-Telway or MODBUS driver to at first, for using the corresponding various PLC programming software, to realize the operations as upload, download, control and communications. These drivers are usually included in the programming software on CD-ROM And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.

Double-click on the icon, then achieve the settings, XWAY Test, MODBUS Test communications test of the RS232 serial (COM slogan) which is connected with TSX08PRGCAB cables. Then the programming software can be used to complete the normal communication with the PLC.

Long-distance communications:

The largest communications range between the TSX08PRGCAB and PLC are up to two kilometers (9600 bps),when external plus terminals an 120 ohm resistance and a 5 VDC power on the RS485 ports (8 pin Mini DIN Male) of the cable. And a FSACC01 Isolators Box (Schneider's model: TSXPACC01) is need to install at the end of PLC. 0.5 mm2 unshielded twisted pair lines are used for Communications. When the distance is over 2,000m, a RS485 repeaters (model: E485GP), can be installed in the bus for extending the distance for 2,000 meters.

KOL-TSXPCX1030 295,00 �

Wed, 06 Apr 2016 20:34:21 +0200

TSXPCX1030

KOL-TSXPCX1030+ 345,00 �

Wed, 06 Apr 2016 20:16:55 +0200

SCHNEIDER opto isolated TSXPCX1030 RS232 interface Cable for Schneider PLC programming, 3m, w master station mode

KOL-TSXPCX3030 89,00 �

Tue, 12 Aug 2014 10:46:41 +0200

TSXPCX3030:USB/RS485 cable for Schneider PLC programming

USB/RS485 interface cable for Schneider PLC programming,2.5 meters,with master/slave switch,connect the TER and AUX port of PLC,the largest communication distance of up to 2 kilometers.

Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose TSXPCX3030+,you can click the following website for TSXPCX3030+:

http://swd.de/oxid/Products-oxid/Hardware/Fieldbus-Hardware/KOL-TSXPCX3030-oxid.html?listtype=search&searchparam=TSXPCX

Introduction

TSXPCX3030 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software to communicate through simulated traditional port and PLC devices.

TSXPCX3030 is used for communication between Modicon TSX series PLC and PC with USB port.

TSXPCX3030 supports TSX Premium(57),TSX Micro(37),TSX Nano(07),TSX Naza(08) and Twido.

TSXPCX3030 programming cable contains a Master/Slave switch which is used to select different working mode instead of PLC controlling RS485.Data sending and receiving is switched automatically,so the cable can be used for multi-station and point-to-point communication.

The TER port of TSX series PLC has a DPT signal which is used to distinguish the working mode of the port.If the DPT signal is high level,then the TER port is under Uni-Telway Master mode which is a requirement for PLC programming.If DPT signal is low level,then the TER port working mode is determined by the PLC.

Product configuration:

Switch M / S corresponding mode

Switch	function	DPT level	the Control flow of data
M	PLC works in main-station model for programming or as Uni-Telway Master for more points communications	1	auto
S	PLC works in slave-station model for other multi-point communication	0	auto

Features and technological index:

● support Windows2000/Windows XP operating system

● fully compatible with USB V1.1 norms and USB CDC V1.1

● USB bus-powered, with current consumption of 50 mA

● baud rate: 300 bps ~ 1Mbps automatically adaptive.

● apply to the TSX Premium, Micro, Naza, Nano and Twido

● each PC only supports a TSXPCX3030 cable

● Length: 2.5 meters, colors: black

Usage:

TSXPCX3030 needs to install USB device drivers at first. And to communicate with PLC needs the latest version of the Uni-Telway or MODBUS driver. The Uni-Telway version which can support TSXPCX3030:

Win2K/XP V1.6

WinNT4/95/98/Me/DOS do not support

The MODBUS version which can support fTSXPCX3030:

Win2K/XP V1.1

WinNT4/95/98/Me/DOS do not support

These drivers are usually included in the programming software on CD-ROM And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.

Double-click on the icon, then achieve the settings, XWAY Test, MODBUS Test communications test of the serial ports (COM slogan) which is connected with TSXPCX3030 cables. Then the programming software can be used to complete the normal communication with the PLC.

Long-distance communications:

The largest communications range between the TSXPCX3030 and PLC are up to 2 kilometers (9600 bps),when external plus terminals 120 ohm resistance on the RS485 ports (8 pin Mini DIN Male) of the cable. And a FSACC01 Isolators Box (Schneider's model: TSXPACC01) is need to install at the end of PLC. 0.5 mm2 unshielded twisted pair lines are used for Communications.

When the distance is Over 2,000m, a RS485 repeaters (model: E485GP), can be installed for extending the distance.

Please Note: USB interface cable cannot be extended.

KOL-TSXPCX3030+ 136,00 �

Wed, 23 Jul 2014 10:41:53 +0200

TSXPCX3030+:isolated USB interface TSXPCX3030 cable

optoelectronic isolated USB interface TSXPCX3030 cable,connect the TER port of PLC.

Introduction

TSXPCX3030+ is a multi-function programming cable which provides the serial connection and RS485 signal conversion through the USB interface. The cable is photoelectric isolated, with the overcurrent,surging, and transient overvoltage protection circuitry, which can be hot plug. It supports the long-distance communication.

TSXPCX3030 + can be used for Modicon TSX Series PLC and PC or other equipment which don’t provide the traditional serial port for communication. The cable can connect with the TER communication port of TSX Premium (57), TSX Micro (37), TSX Nano (07), TSX Naza (08) and Twido PLC.

The snap switch located on the TSXPCX3030+ programming cable are used to choose different operating modes. The cable rejects the way which the transceiving of the RS485 is controlled by the PLC, and all the data transceiving is automatically controlled. It can be used for multi-point and point-to-point communication applications.

TER port of the TSX Series PLC have a DPT signal pin, which is used to determine its working mode. If the DPT is high-level, TER always work in the Uni-Telway Master (master station) mode, and it need under this mode for PLC programming. If the DPT is low level, the working mode of TER is decided by the PLC.

TSXPCX3030+ principle and figure structure:

Switch M / S corresponding mode

Switch	Function	DPT level	the Control flow of data
M	PLC works in main-station model for programming or as Uni-Telway Master for more points communications	1	auto
S	PLC works in slave-station model for other multi-point communication	0	auto

This product is the USB to RS485 isolated converters which with the protection, so it’s need to use the power of USB port and TER port. Due to the AUX expansion communications interface of PLC has no power-pin, the product do not support Communicating with AUX port.

Features and technological index:

● support Windows2000/Windows XP operating system

● fully compatible with USB V1.1 norms and USB CDC V1.1

● USB-bus powered and PLC TER port power supply at the same time

● voltage of Optical Isolator: 1000 VDC (up to 3000 VDC, it should be declared when making an order).

● baud rate: 300 bps ~ 1Mbps automatically adaptive.

● apply to the TSX Premium, Micro, Naza, Nano and Twido

● each PC only supports a TSXPCX3030 + cable

● Length: 3 meters, colors: black

Usage:

TSXPCX3030+ needs to install USB device drivers at first. And to communicate with PLC needs the latest version of the Uni-Telway or MODBUS driver.

The Uni-Telway version which can support TSXPCX3030+:

Win2K/XP V1.6

WinNT4/95/98/Me/DOS do not support

The MODBUS version which can support fTSXPCX3030+:

Win2K/XP V1.1

WinNT4/95/98/Me/DOS do not support

Double-click on the icon, then achieve the settings, XWAY Test, MODBUS Test communications test of the serial ports (COM slogan) which is connected with TSXPCX3030+ cables. Then the programming software can be used to complete the normal communication with the PLC.

Long-distance communications:

The largest communications range between the TSXPCX3030+ and PLC are up to 2 kilometers (9600 bps),when external plus terminals 120 ohm resistance, an 100mA power and a 5 VDC power on the RS485 ports (8 pin Mini DIN Male) of the cable. And a FSACC01 Isolators Box (Schneider's model: TSXPACC01) is need to install at the end of PLC. 0.5 mm2 unshielded twisted pair lines are used for Communications. When the distance is Over 500m, a RS485 repeaters (model: E485GP), can be installed for extending the distance.

Please Note: USB interface cable cannot be extended.

KOL-XBT-Z915 48,00 �

Thu, 04 Apr 2013 19:22:22 +0200

SCHNEIDER XBTN401/NU400 Schneider PLC programming cable

KOL-XBT-Z968 48,00 �

Thu, 04 Apr 2013 19:22:22 +0200

SCHNEIDER Cable for Schneider PLC programming and XBT series touch panel