SWD.de/+ Manufacturer +/Kollewin Technology Co., Ltd./KOL-Siemens S7-200 Adapter, PPI Cable for SIMATIC S7-200 PLC products

KOL-PC/PPI 33,00 �

Thu, 06 Mar 2014 15:42:13 +0100

PC/PPI:programming cable for S7-200PLC

RS232/PPI interface,programming cable for Siemens S7-200PLC ,3 meters,can replace 6ES7 901-3CB30-0XA0,not support long distance communication and multi-master
station communication.

Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose PC/PPI+,you can click the following website for PC/PPI+: http://swd.de/oxid/Manufacturer/Kollewin-Technology-Co-Ltd/Siemens-S7-200-Adapter-PPI-Cable-for-SIMATIC-S7-200-PLC/KOL-PC-PPI-oxid.html

The quality is guaranteed.It's tested before shippment.Not made by Siemens,OEM product as the replacement.

KOL-PC/PPI+ 76,00 �

Thu, 06 Mar 2014 15:43:04 +0100

PC/PPI+:optoelectronic isolated PC/PPI cable

optoelectronic isolated PC/PPI cable,support 10 bit and 11 bit modem communication,with communication indicator,automatically adjust the baud rate from 0 to 115.2Kbps,the largest communication distance of up to 2 kilometers.Not support multi-master station communication.

The PC/PPI+ programming cable is the transformation electric cable from RS232 to the PPI connection (RS485), and it is suitable for Simens S7-200 series PLC, the correspondence and the monitoring. It also supports the PPI agreement and the free mouth communication protocol, and can use MODEM (modem) through the telephone line to make a long-distance correspondence. Since the cable is isolated with the electro-optical and built-in anti-static, surge and other transient over-voltage protection circuit, it solves the problem that the communication I always burned easily well. And it is especially suitable for the long-term monitoring communications which are under the industrial site with a poor environment.

Main technical parameters：

★ Isolation voltage: 1000VDC（The maximum to 3000 VDC, orders required statement）

★ According to a transient voltage suppression. The RS485 port can withstand the power of up to 500 W transient over-voltage and lightning impact，the RS232 port and power circuit are equipped with surge protection to protect the circuit. The whole product can be arbitrarily charged plug.

★ Baud rate：0～115.2kbps Adaptive（products available for sale since January 2008 ）

★ The longest communication distance：2 km（Baud rate:9600bps per hour），1km（Baud rate:115.2Kbps per hour）

★ With a power indicator light and the data received and sent indicator light

★ Temperature:-40～85℃（products available for sale since January 2008）

★ Dimension：103×50×26，The total length of cable is 5m.

The product structure：

The use of products：

1、 PLC and computer connections for the PPI or free Communication, programming：

Insert the PC / PPI + cable’s RS485 plug into the programming mouth of S7-200PLC and the RS232 plug into the computer’s RS232 port. Chose the corresponding number of the COM port. Switch the 10bit, 11bit selection switch to 11 bit. The baud rate of the PC/PPI+ cable is adaptive from 0 to 115.2kpbs. There is no need to set that.

2、The long-distance communications between PLC and computer：

When having long-distance communications, the PC / PPI + requires additional external power and we should parallel 120Ωi end resistance n between the 3, 8 of RS485 plugs to eliminate signal reflection, as shown below:

3、 long-distance communications between the PLC and computer via telephone lines:

You have to make a cross-adapter by yourself when you get the PC/PPI+’s RS232 port and the MODEM connected. Switch to the corresponding location according to the MODEM that it is 10 or 11.

10 bits MODEM refers: 1 outset bit, 8 data bits, no parity bit, and 1 stop bit(or 7 data bits,1 parity bit).This kind of MODEM is comparative common on the market.

11 bits MODEM refers: 1 outset bit, 8 data bits, 1 parity bit (Occasionally bit check), and 1 stop bit .

KOL-USB/PPI 76,00 �

Thu, 06 Mar 2014 15:44:59 +0100

USB/PPI:programming cable for S7-200PLC

USB/PPI interface,programming cable for Siemens S7-200PLC ,3 meters,with communication indicator,can replace 6ES7 901-3DB30-0XA0,the largest communication distance of up to 2 kilometers.Not support multi-master station
communication.

Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose USB/PPI+,you can click the following website for USB/PPI+:

http://swd.de/oxid/de/Produkte/Produktassistent/KOL-USB-PPI.html?listtype=search&searchparam=USB%2FPPI%2B

USB/PPI programming cable simulates USB port as traditional serial port (usually COM3), which enables existing programming software(STEP 7-MicroWin) to communicate through simulated traditional port and PLC devices.

The working power of this cable is from USB port,not provided by the communication port of PLC.The LED of the adapter indicates the sending and receiving status of data.
USB/PPI is applied to Siemens S7-200 PLC,NOT support hot plug.For the industry scene of strong interference and easily destroying communication port,pls choose optoelectronic isolated USB/PPI+ programming cable.

Outline configuration:

Features and technological index:

● Support USB/PPI operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
● Support USB/PPI programming software version: STEP7 Micro / WIN V3.2 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption is 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Support long-distance communications, the largest communications is two kilometers (9600 bps)
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
● Cable length: 3m; Color: black

Usage:

USB device drivers should be installed before using USB/PPI programming cable. After completing Driver installation, the corresponding COM port for the USB/PPI programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces. Here are requested to indicate that "USB" option in the local communications interface setting which the software is not support to the programming cable.

If the COM port in the programming software with "*" symbols, such as "* COM3", it’s shown that the COM port have faults. Quit the software and plug a USB plug or re-install the USB driver.

This cable do not support the 187.5 Kbps baud rate as the same with the Siemens PC / PPI programming cable which with the RS232 interfaces.

Please note that Siemens COM port in programming software is up to support the option to COM8.But the ports more than COM8 are able to choose but in fact can not be used!

Long-distance communication:

The largest communications range between the USB/PPI and PLC are up to 2 kilometers (9600 bps),when external plus terminals 120 ohm resistance is needed to connect between the pin3 and pin8 of the RS485 ports (DB9 Male) to eliminate signal reflection. And a PFB-G Bus Isolators is needed to install at the end of PLC. 0.22 mm2 or more unshielded twisted pair lines are used for Communications. When the distance is Over 2,000m, a RS485 repeaters (model: E485GP), can be installed for extending the distance.

KOL-USB/PPI+ 76,00 �

Thu, 06 Mar 2014 15:47:20 +0100

USB/PPI+:optoelectronic isolated USB/PPI adapter

optoelectronic isolated USB/PPI adapter,can replace:6ES7 901-3DB30-0XA0,the largest communication distance of up to 2 kilometers.Not support multimaster station communication.

Summary:

USB/PPI+ is the programming cable in which USB interface provided the serial connection, RS485 signal conversion and PPI protocol conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port and the programming port of the PLC. The two-color LED on the converter box indicates data’s transceiving status.

Outline configuration:

signals definition of the RS485-Block (DB9M) of the USB/PPI+

pins	signal	Description
3	RxD/TxD+	Data Line B (RS485 signal positive)
8	RxD/TxD-	Data Line A (RS485 signal negative)
7	P24V	24V power positive
2	M24V	24V power negative(RS485 logic ground)

Features and technological index:

● Support USB/PPI+ operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )

● Support USB/PPI+ programming software version: STEP7 Micro / WIN V3.2 and above.

● Fully compatible with USB V1.1 norms and USB CDC V1.1

● USB bus powered and PLC programming port 24 V power supply

● Optical isolation voltage: 1000 VDC ((up to 3000 VDC, it should be declared when making an order)

● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate

● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity

● Support long-distance communications, the largest communications is two kilometers (9600 bps)

● Each PC only supports one USB cable programming

● Working temperature: -20 ~ +75 ℃

● Cable length: 3m; Color: black

Usage:

USB device drivers should be installed before using USB/PPI+ programming cable. After completing Driver installation, the corresponding COM port for the USB/PPI+ programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces. Here are requested to indicate that "USB" option in the local communications interface setting which the software is not support to the programming cable.

If the COM port in the programming software with "*" symbols, such as "* COM3", it’s shown that the COM port have faults. Quit the software and plug a USB plug or re-install the USB driver.

This cable do not support the 187.5 Kbps baud rate as the same with the Siemens PC / PPI programming cable which with the RS232 interfaces.

Please note that Siemens COM port in programming software is up to support the option to COM8.But the ports more than COM8 are able to choose but in fact can not be used!

Long-distance communications:

The largest communications range between the USB/PPI+ and PLC are up to 2 kilometers (9600 bps),when external plus terminals 120 ohm resistance is needed to connect between the pin3 and pin8 of the RS485 ports (DB9 Male) to eliminate signal reflection, but also a 24 VDC power between the pin2 and pin7. And a PFB-G Bus Isolators is needed to install at the end of PLC. 0.22 mm2 or more unshielded twisted pair lines are used for Communications. When the distance is Over 2,000m, a RS485 repeaters can be installed for extending the distance.

Please Note: USB interface cable cannot be extended.

KOL-USB/PPIM+ 112,00 �

Sun, 13 Dec 2015 22:29:33 +0100

USB/PPIM+:isolated S7-200PLC multi-master station PPI programming

optoelectronic isolated USB Siemens S7-200PLC multi-master station PPI programming cable,directly use the STEP7 MicroWIN software to communicate,no need to install driver,support PPI,multi-master station PPI and advanced PPI,support 187.5Kbps high speed communication,just the same as 6ES7 901-3DB30-0XA0,3 meters,with communication indicator.

Summary:

USB / PPIM + is the PPI Multi-Master programming Cable which with USB interface, to realize the level conversion and various of PPI protocol conversion from USB to RS485.Many cheap USB / PPI cable on the market simulate USB to virtual serial (COM port) to realize the communications, it’s commonly known as "pseudo-USB interface". The cable only convert the level from USB to RS485, can only support the normal PPI Protocol. But the USB / PPIM + is the real USB interface cable, without installing drivers, directly use the USB option in STEP7 Micre / WIN software, support PPI, Advanced PPI,and Multiple Master Network Protocol. The cable support the 187.5 Kbps high-speed communications, and take charge of the Multiple Master Network.

This cable is 100% compatible with Siemens PPI Multi-Master USB Cable 6 ES7 901-3DB30-0XA0, and the only difference is that the work power supply from the computer's USB port through the DC / DC isolation, no longer powered by the PLC port. It’s easy to extend communications distance of the RS485 without considering the power supply. The two-color LED on the converter box indicates data’s transceiving status.

USB/PPIM+ is designed for industrial-type photoelectric isolation cable. USB port and RS485 ports are equipped with surge protection and anti-lightning protection circuitry, which can be Hot plug. It’s applicable to the entire Siemens S7-200 Series PLC It’s particularly suited to the industrial scene which the communications interface is more easily damaged because of the greater interference. The protection circuit ensures the safe operation of the system.

Outline configuration:

signals definition of the RS485-Block (DB9M) of the USB/PPIM+

pin	signal	Description
3	RxD/TxD+	Data Line B (RS485 signal positive)
8	RxD/TxD-	Data Line A (RS485 signal negative)
5	GND	DGND

Features and technological index:

● support USB / PPIM + operating system: Windows2000/Windows XP

● support USB / PPIM + programming software version: STEP7 Micro / WIN V4.0 and above, without installing drivers, directly use the USB option in Local Connection.

● USB is fully compatible with USB V1.1 norms and USB V2.0

● USB bus-powered, 5 VDC, the power consumption is about 100 mA, with over current protection

● optical isolation voltage: 1000 VDC (up to 3000 VDC, it should be declared when making an order)

● USB port with anti-surge protection, RS485 port with 500 W anti-lightning protection and over current protection

● support PPI baud rate: 9.6 Kbps, 19.2Kbps, 187.5Kbps

● support the communication protocol: PPI, senior PPI, multi-master PPI.

● support long-distance communications, the largest communications distance is 2,000 meters (9.6 Kbps) or 1 km(187.5Kbps).

● each PC only supports a USB cable programming

● temperature: -20 ~ +75 ℃

● Cable length: three meters, colors: black

Usage:

1, Enter STEP7 Micro / WIN programming software and click "Settings PG / PC interface", check the "PC / PPI cable (PPI)" and click "Properties…" button.

2,Select "USB" option in "Local Connection".

3, Set up the Station Parameters settings in "PPI" as following: Address: 0, Timeout: 1s .

Set up the Network Parameters in "PPI" in accordance with the needs of you. You can choose any of the following:

Advanced PPI: check the Advanced PPI.

Multiple Master Network: check Multiple Master Network.

General PPI: do not check any of option, which is the default option.

select a baud rate as the same with the PLC. If you do not know that the PLC baud rate can be arbitrary choice one.

Click "OK" button to return to the main menu interface.

4, click on the main menu interface of "communication" button to enter the PLC interface connection, check the "search all baud rate" box, and then double-click on the "Double-click refresh”. After a while of searching ,the PLC model And address and other information will display on the software, it’s means that connect successfully with the PLC. Click the "confirmation" button to conduct upload, download, and other operating.

PPI Multi-Master Cable of USB/PPIM+ no longer support the early version of the low CPU21X series PLC.PPI Multi-Master Cable of USB/PPIM+ do not support Freeport communication and MODEM communication.

Long-distance communications:

The largest communications range between the USB/PPIM+ and PLC are up to 2 kilometers (9.6K bps) or 1 km(187.5Kbps),when external plus terminals 120 ohm resistance is needed to connect between the pin3 and pin8 of the RS485 ports (DB9 Male) to eliminate signal reflection. And a PFB-G Bus Isolators is needed to install at the end of PLC. 0.22 mm2 or more unshielded twisted pair lines are used for Communications. When the distance is longer than the length of cable, a RS485 repeaters (model: E485GP), can be installed in the bus for extending the distance.

Because the power of USB / PPIM + all supplied from the USB ports of the computer, you do not need to consider power supply when extended the length of cable. It’s better than the similar products of Siemens.

Please Note: USB interface cable cannot be extended.