SWD.de/+ Manufacturer +/Kollewin Technology Co., Ltd./KOL-Siemens S7-300, S7-400 Adapter, MPI Cable for SIMATIC S7-300/S7-400 PLC products

KOL-USB Adapter CN 137,00 �

Tue, 02 Jun 2015 14:23:09 +0200

USB ADAPTER CN:support PC USB to PROFIBUS/MPI/PPI communication

The differences with USB/MPI+ V4.0 are as follows:
(1)support Win7 64bits
(2)Supoort Step7 V5.5 and above
(3)Support main profibus function
1.don't support one PC communicate with several PLCs at
the same time.
2.don't support several PCs communicate with one
PLC at the same time.

USB Adapter CN is a high-tech adapter similar , support USB of computer to PROFIBUS/MPI/PPI communication, USB Adapter CN adopt power supply from USB port,use the low-power low-voltage chip,even if the USB port power low down to 4V，it still can ensure the stable and reliable work of the adapter. RS485 interface(PROFIBUS/MPI/PPI) of USB Adapter CN is the standard interface as same as the CP5611/CP5512, the 6PIN and 5PIN of DB9F socket output 5VDC power which can supply the power for the termination resistors. It's used for Siemens S7-200/300/400 PLC programming.

Main Technical Specifications:
● Compatible with USB V1.1 and USB V2.0 specifications,connect the USB port of PC to DP/MPI/PPI interface of S7 system.
● Support PROFIBUS/MPI/PPI communication,auto bus protocol test
● You can download the latest software from Siemens website to update the firmware for USB Adapter CN to get the latest function
● Power supply from USB port, power consumption about 150mA,with over current and surge protection
● Opto-isolated voltage 1000VDC.
● USB port has the anti-surging protection
● RS485 interface has the anti-lightning and surging protector, Repeatability surge capacity: Ipp=100A（10/700us，4KV）,meet the standard ITU-TK20/21、VDE 0433. ±15KV ESD protection.
● support long distance communication,the largest communication distance meet the profibus standard
● With the power indicator, USB indicator, DP/MPI indicator.
● One PC only support one USB Adapter CN
● Can install the adapter on the S7-300/400PLC rail or 35MM standard rail.
● Overall Size: 123mm×68mm×30mm(Length*Width*Height),with the mounting bracket
● Working Temperature: -20～+75℃

KOL-PC/MPI 129,00 �

Thu, 06 Mar 2014 15:50:10 +0100

PC/MPI:Siemens S7-300 PLC Programming cable

Siemens S7-300 PLC Programming cable,5 meters.

Not isolated,so it doesn't support hot plug,if need isolated cable,pls choose PC/MPI+,you can click the following website for PC/MPI+:

http://swd.de/oxid/Products-oxid/Hardware/Fieldbus-Hardware/KOL-PC-MPI-oxid.html?listtype=search&searchparam=PC%2FMPI%2B

PC / MPI adapter is also known as PC adapter. It’s physical interface is the conversion from RS232 interfaces to the RS485,including the conversion from RS232 to MPI protocol (MultiPoint Interface).And it is used for the connecting between the PC COM (RS232) and MPI (RS485) of Siemens S7-300PLC.This product is non-isolate, choose PC / MPI + if you need an electro-optical isolation.

Main technical parameters：

★ RS232 Port baud rate：19.2Kbps

★ MPI Port baud rate：187.5Kbps

★ With the data received and sent indicator light

★ Temperature：0～75℃

★ Total length of cable：5m

STEP7 Software settings：

1、 Go into STEP7 the main software programming interface（SIMATIC Manager），click “Set PG/PC Interface…” which is under the “Options” menu, and the get to the PG/PC setting interface。

2、 Double-click on “PC Adapter（Auto）”or“PC Adapter（MPI）”to go into the interface setting of parameters of RS232 and the MPI. The adapter does not support "PC Adapter (PROFIBUS)" option.

3、 Click on the "Local Connection" option to set the interface parameters of RS232, to choose the right computers COM mouth (RS232), change the RS232 communication baud rate to 19200 bps.

4、 Click the "MPI" option (if it's on "PC Adapter (MPI)" method) to set MPI interface parameters for the adapter, as the MPI interface of the adapter gets the baud rate fixed at 187.5 Kbps, so here can only be set to 187.5 Kbps.
If it is "PC Adapter (Auto)" method the choice should be "Address: 0" and "Timeout: 30s".

After the settings above the adapter can be set up on-line communication with the PLC, now you should pay attention to that you shouldn’t change the factory default of the MPI port baud rate 187.5Kpbs on the CPU which is under the “Network Settings”.

Since the baud rate of the MPI port of the adapter is fixed at 187.5Kbps, if it is set at other figures, the adapter will not work with PLC! Make sure that the baud rate of the MPI port on your S7-300PLC’s CPU is fixed at 187.5Kpbs.Otherwise,you have to use the Siemens's programming communication facility to set that baud rate to 187.5Kpbs,in order to make the adapter work correctly.

The quality is guaranteed.It's tested before shippment.Not made by Siemens,OEM product as the replacement.

After you place the order on line,pls contact us and we will calculate the freight fee for you according to your requirements.

The item will be delivered within 3-5 working days once payment is received and cleared.Please pay within 3 days after your order.

If you need large quantity(more than 20PCS),Pls contact us and we will give you the competitive wholesale price.

KOL-PC/MPI+ 127,00 �

Fri, 07 Mar 2014 15:34:56 +0100

PC/MPI+:RS232 isolated Siemens S7-300/400 PLC Programming adapter

optoelectronic isolated RS232/MPI,Siemens S7-300/400 PLC Programming adapter cable,with communication indicator,can replace Siemens 6ES7 972-0CA23-0XA0,automatically adjust the communication speed from 19.2Kbps to 115.2Kbps for the PC port,automatically adjust the communication speed from 19.2Kbps to 187.5Kbps for the MPI interface.Can connect PLC and the touch panel of third party factory to communicate.It doesn't support profibus function.

PC/MPI+ adapter, or named PC adapter, could achieve the level conversion of RS232 to RS485 and the protocal conversion of RS232 to MPI(MultiPoint Interface).

PC/MPI+ is the adapter of photoelectric isolation type towards industrial design. Between RS232 port and RS485 port exist the surge protection and anti-lightning protection circuit, adaptable to the full PLC series of Siemens S7-300/400 and those devices with MPI port, especially the industrial fields with greater interference and easily damaged communication port. All kinds of protection measures in the circuit give promission to the safe operation of the system.

PC/MPI+ can make touch-screen communications with the third party under the link of S7-300/400PLC, such as eView, Wei-lun and kun-lun state.

Characteristics and main technical parametres:

★ Power: It is supplied by the 24VDC MPI port of PLC, power consumption of about 1w, with overcurrent protection and surge protection.

★ Isolation Voltage: 1000VDC(Maximun to 3000 VDC, orders require statement.)

★ RS232 port has anti-surge protection, RS485 port has anti-lightning protection and overcurrent protection with the consumption of 500w.

★ RS232 port baud rate: 19.2Kbps---115.2Kbps, automatically adaptable to the standard baud rate.

★ MPI port baud rate: 187.5Kbps---19.2Kbps, automatically adaptable.

★ Supporting the connection of PLC to touch-screen communication with the third party.

★ With a power indicater light, on-line and data transmission indicater light.

★ Working temperature: -20～75℃

★ Dimension: 103×50×26; After connecting the RS232 cables: 5.5m.

RS232 adapter port and port-pin RS485 signal definations:

RS232-Block(DB9M) defination signals

number	name	Instructions
1	DCD	No use
2	RXD	RS232 signal reception
3	TXD	RS232 signal sending
4	DTR	Short circuit with No.6
5	GND	RS232 signal to ground
6	DSR	Short cut with No.4
7	RTS	Sending requsts
8	CTS	Sending clear
9	RI	No use

RS485-Block(DB9M) defination signals

Pin number	Signal name	Instructions
1	NC	No use
2	M24V	Negtive 24VDC power
3	B	RS485 positive signal
4	RTSAS	Data reception control
5	GND	RS485 signal to ground
6	NC	No use
7	P24V	24VDC positive power
8	A	RS485 negative signal
9	RTS_PG	Data-send control

Instructions of the indicater light

Indicater light	On	Qlittering	Out
Power	Normal	Error	Error or failing to link to power
Active	Online	Transmission of data	Not online
Tx	Error	Send data	No data transmission

Software settings of STEP7:

Entering the main interface of STEP7 programming software(SIMATIC Manager), clicking on “Options” menu under the “Set PG/PC Interface…” option into the PG/PC interface settings.

1. Double clicking on “PC Adapter(MPI)” into the RS232 interfaces and MPI set of parameters. The adapter does not support “PC Adapter(PROFIBUS)” option.

2. Clicking on “Local Connection” option set RS232 interface parameters, choosing PC/MPI to connect on the port of COM correctly, and it will adapt to the chosen baud rate automatically, both 19200bps and 38400bps of RS232 communication.

3. Clicking “MPI” to set port parameters of adapter MPI, acceptable at both 187.5Kbps and 19.2Kbps, and the adapter will adapt to its baud rate automatically. Others have already been set.

4. On-line test accessing point: Using PC/MPI to connect to MPI port and RS232 port of the computer. And then click on the button in the red circle as follow, if appearing the data inside the red line, the test has passed. Then one could operate on it.

The long-distance communication of PC/MPI+ adapter:

1. To extend the distance of RS485 port:

2. To extend the distance of RS232 port:

RS232 Cable:

KOL-USB/MPI+V2.0 127,00 �

Thu, 29 Oct 2015 19:24:12 +0100

USB/MPI+ V2.0:USB isolated Siemens S7-300/400 PLC adapter

This is USB/MPI+ V2.0 only for Siemens S7-300/400 PLC.Now USB/MPI+ V4.0 is available.USB/MPI+ V4.0 is for Siemens S7-200/300/400 PLC programming adapter,use Siemens original driver.

optoelectronic isolated USB/MPI V2.0,Siemens S7-300/400 PLC Programming adapter cable,3 meters,with communication indicator,can replace Siemens 6ES7 972-0CB20-0XA0,automatically adjust the communication speed from 19.2Kbps to 115.2Kbps for the PC port,automatically adjust the communication speed from 19.2Kbps to 187.5Kbps for the MPI interface.It doesn't support profibus function.

USB/MPI+ is the optoelectronic isolated adapter for industrial design. There is anti-surging& anti-lightning protection circuit for the USB and RS485 interface. It support hot plug. It’s suitable for the communication between Siemens S7-300/400 series PLC or other equipments with MPI interface and computer. In particular, it applies to the strong interfere industrial scene and the safeguard in the circuit guarantees the safely running of the system.

USB/MPI+ programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(STEP 7) to communicate through simulated traditional port and PLC devices.

Outline configuration:

signals definition of the RS485-Block (DB9M) of the USB/MPI +

pin	signal	Description
1	NC	No use
2	M24V	24VDC power negative
3	B	RS485 signals positive
4	RTSAS	Data reception control
5	GND	RS485 Signal Ground
6	NC	No use
7	P24V	24VDC power positive
8	A	RS485 signals negative
9	RTS_PG	Data sent control

The status of the indicator

Indicator	Normally on	twinkle	OFF
Power	Power normal	Fault	Fault or Not connected to power
Active	Online status	Transmission of data	Not online
Tx	Fault	Send data	No data transmission

Features and technological index:

● Support Windows2000/Windows XP

● Support STEP7 V5.2 and higher

● Fully compatible with USB V1.1 and USB V2.0

● Power supply by both USB main line and MPI programming port(Total 1W).with Overcurrent Protection and Surge Protection

● High optoelectronic isolation voltage up to 1000VDC

● The USB port design with surge protection .The RS485 port design with overcurrent protection and lightning protection(500W)

● Baud rate of Com port on PC: 19.2Kbps~115.2Kbps

● Baud rate of MPI port on PLC: 19.2Kbps~187.5Kbps

● Support long distance communication up to 1000m

● Working temperature -20~+75'C

● Length 3 meters.Color:black

● One pc supports one USB programming cable only

Usage:

USB device drivers should be installed before using USB/MPI+ programming cable. After completing Driver installation, the corresponding COM port for the USB/MPI+ programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces. Here are requested to indicate that "USB" option in the local communications interface setting which the software is not support to the programming cable.

If the COM port in the programming software with "*" symbols, such as "* COM3", it’s shown that the COM port have faults. Quit the software and plug a USB plug or re-install the USB driver.

Please note that Siemens COM port in programming software is up to support the option to COM8.But the ports more than COM8 are able to choose but in fact can not be used!

STEP7 software settings:
Enter the main interface of STEP7 programming software (SIMATIC Manager), click on the "Set PG / PC Interface…" option under "Options" menu into the PG / PC interface settings.

1, Double-click on "PC Adapter (MPI)" to set the parameters of COM port and MPI port. The adapter does not support "PC Adapter (PROFIBUS)" option.

2, Click on "Local Connection" option to set the parameters of COM port, correct choose the COM port in the equipment manager after the driver of USB / MPI + USB has been installed, select the 19200 bps or 38400 bps as the baud rate of COM Communication. USB / MPI + will automatically adapt to the choice of baud rate.

3, Click "MPI" to set the parameters of MPI interface adapter options, baud rate can be set to 187.5 Kbps, or 19.2 Kbps, USB / MPI + adapter will automatically adapt to the MPI port of the PLC baud rate. Other parameters set as default.

4, On-line test can access the points: USB / MPI + connect the MPI port of the S7-300/400PLC with the computer's USB port. Click on the main menu interface, as shown in a red circle button. If the data in red box is shown as the picture, the on-line test has pasted. As so far, the setting has completely finished. It can do all Operation such as upload, download ,monitoring of the procedures and other operations.

Long-distance communications:

For USB/MPI+, the largest communication distance is up to 1000m at the communication speed of 187.5Kbps. It needs to splice 120ohm terminal resistance between 3 and 8 pin on the RS485 port(DB9 Male) to eliminate signal reflection, and connect 24VDC power between 7 and 2 pin. But requires one PFB-G for each PLC.

Please Note: USB interface cable cannot be extended.

The quality is guaranteed.It's tested before shippment.Not made by Siemens,OEM product as the replacement.

KOL-USB/MPI+V4.0 140,00 �

Thu, 29 Oct 2015 19:24:12 +0100

USB/MPI+ V4.0:USB isolated Siemens S7-200/300/400 PLC adapter

PLC MPI or S7-200 PLC PPI communication. It’s the same as Siemens PC
Adapter USB except that this USB/MPI+ V4.0 doesn’t support profibus
communication. Its driver is the Siemens PC_Adapter_USB driver, and choose
the USB port, not the COM port.
The working power supply of this cable USB/MPI+ V 4.0 is directly from the USB
port, but not the PLC programming interface.
USB/MPI+ V 4.0 is the optoelectronic isolated adapter for industrial design. There
is anti-surging& anti-lightning protection circuit for the USB and RS485 interface.
It support hot plug. It’s suitable for S7-300/400/200 series PLC. In particular, it
applies to the strong interfere industrial scene and the safeguard in the circuit
guarantees the safely running of the system.

USB/MPI+ principle and figure structure:

Indicator	On	Flash	Off
PWR USB	Power On	Error	Error Or Power off
RxD	Error	Data exchange from PLC	Not Connected
TxD	Error	Data exchange to PLC	No Data exchange

Indicator State

Functions

● Support Windows2000/Windows XP/Vista

● Support STEP7 V5.2 and higher,STEP7 Micro/Win 4.0 and higher

● Fully compatible with USB V2.0

● Power supply by USB port(100mA). with overcurrent Protection and Surge Protection

● High optoelectronic isolation voltage up to 1000VDC

● The USB port design with surge protection.

● The RS485 port design with overcurrent protection and lightning

protection:Ipp=100A(10/700us,4KV) .Accord to the standard:ITU-TK20/21,VDE0433. ±15KV ESD Protection.

● Baud rate of MPI port on PLC: 19.2Kbps,187.5Kbps,1.5Mbps. automatically adjust.

● Baud rate of PPI port on PLC: 9.6Kbps,19.2Kbps,187.5Kbps.

automatically adjust.

● Support long distance communication up to 1000m

● Working temperature -20~+75'C

● Length 3 meters.Color:black

● One pc supports one USB programming cable only