SWD.de/+ Manufacturer +/Sealevel Systems, Inc/SEA-Low Profile PCI Express - Async. Serial Cards products

SEA-7205e 252,00 �

Thu, 04 Apr 2013 19:23:45 +0200

COMM+2.PCIe: Low Profil PCI Express 2 Port RS-232/422/485 Serial Interface

SEA-7802e 299,00 �

Sun, 04 Nov 2018 18:12:43 +0100

7802e COMM+8.422.PCIe Low Profile PCI Express 8-Port RS-422, RS-485 Serial Interface

Description

The 7802e low profile PCI Express serial interface provides eight serial ports, each individually field-configurable for RS-422 or RS-485 communications. The board uses 16C954 UARTs with 128-byte Tx/Rx FIFOs that enables data rates to 921.6K bps for reliable high-speed communications in data intensive applications. This high-performance UART includes 9-bit framing support and is register compatible with legacy 16550 software applications. In addition, the board derives a 62.5 MHz clock from the PCI Express link. This ultra-high speed clock is divided by a flexible 8-bit clock prescalar with 1/8 steps to provide support for the widest range of standard and non-standard baud rates.

In RS-485 mode the board provides automatic control of the RS-485 driver in hardware, eliminating the need for application software control. This allows the 7802e to be used with standard serial communications applications and removes the risk of bus contention and data corruption. Additionally, RS-485 network termination, critical to robust multi-drop communication, can be selectively added to the circuit via DIP-switches.

Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The 7802e is a PCI Express X1 board compatible with any PCI Express slot. If you have a standard size PCI Express slot, be sure to select the standard profile bracket. The board ships with a 36 inch cable that terminates to eight DB9M connectors.

• Each port individually configurable for RS-422 or RS-485
• 16C954 buffered UARTs with 128-byte FIFOs
• Oscillator and clock prescalar support wide range of baud rates
• Supports 9-bit protocol framing
• Each port supports data rates to 921.6K bps
• RS-485 line termination, pull-up and pull-down resistors for each port are selectable via dipswitch
• RS-485 ECHO can be enabled/disabled via dipswitch
• Automatic RS-485 enable/disable in hardware
• PCI Express X1 compliant
• Compatible with all low profile PCI Express slots
• Included 36″ cable terminates to eight DB9M connectors (Item# CA231)

SEA-7803e 269,00 �

Sun, 04 Nov 2018 18:06:02 +0100

7803e COMM+8.PCIe Low Profile PCI Express 8-Port RS-232 Serial Interface

Description

The 7803e low-profile PCI Express serial interface provides eight RS-232 serial ports. For maximum compatibility with a wide range of peripherals, the board supports all standard RS-232 modem control signals. The serial ports utilize 16C954 UARTs with 128-byte Tx/Rx FIFOs that enables data rates to 921.6K bps for reliable high-speed communications in data intensive applications. This high-performance UART includes 9-bit framing support and is fully software compatible with legacy 16550 applications. In addition, the board derives a 62.5 MHz clock from the PCI Express link. This ultra-high speed clock is divided by a flexible 8-bit clock prescalar with 1/8 steps to provide support for the widest range of standard and non-standard baud rates.

The Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The 7803e is a PCI Express X1 board compatible with any low profile PCI Express slot. If you have a standard size PCI Express slot, be sure to select the standard profile bracket. The board includes a 36 inch cable that terminates to eight DB25M connectors.

• 16C954 buffered UARTs with 128-byte FIFOs
• Oscillator and clock prescalar support wide range of baud rates
• Supports 9-bit protocol framing
• Each port supports data rates to 921.6K bps
• PCI Express X1 compliant
• Compatible with low profile PCI Express slots
• All modem control signals implemented
• Included 36″ cable terminates to eight DB25M connectors (Item# CA202)

SEA-7406e 159,00 �

Mon, 05 Nov 2018 16:05:28 +0100

7406e COMM+4/232.PCIe Low Profile PCI Express 4-Port RS-232 Serial Interface

Description

The 7406e low profile PCI Express serial interface provides four RS-232 serial ports. For maximum compatibility with a wide range of peripherals, the board supports all standard RS-232 modem control signals. The serial ports utilize a 16C954 UART with 128-byte Tx/Rx FIFOs that enables data rates to 921.6K bps for reliable high-speed communications in data intensive applications. This high-performance UART includes 9-bit framing support and is fully software compatible with legacy 16550 applications. In addition, the board derives a 62.5 MHz clock from the PCI Express link. This ultra-high speed clock is divided by a flexible 8-bit clock prescalar with 1/8 steps to provide support for the widest range of standard and non-standard baud rates.

The Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The 7406e is a PCI Express X1 board compatible with any low profile PCI Express slot. If you have a standard size PCI Express slot, be sure to select the standard profile bracket. The board includes a 36 inch cable that terminates to four DB25M connectors.

• 16C954 buffered UARTs with 128-byte FIFOs
• Oscillator and clock prescalar support wide range of baud rates
• Supports 9-bit protocol framing
• Each port supports data rates to 921.6K bps
• PCI Express X1 compliant
• Compatible with all low profile PCI Express slots
• All modem control signals implemented
• Included 36″ cable terminates to four DB25M connectors (Item# CA199)

SEA-7402e 189,00 �

Mon, 05 Nov 2018 16:25:33 +0100

7402e COMM+4.422.PCIe Low Profile PCI Express 4-Port RS-422, RS-485 Serial Interface

Description

The 7402e low profile PCI Express serial interface provides four serial ports, each individually field-configurable for RS-422 or RS-485 communications. The board uses a 16C954 UART with 128-byte Tx/Rx FIFOs that enables data rates to 921.6K bps for reliable high-speed communications in data intensive applications. This high-performance UART includes 9-bit framing support and is register compatible with legacy 16550 software applications. In addition, the board derives a 62.5 MHz clock from the PCI Express link. This ultra-high speed clock is divided by a flexible 8-bit clock prescalar with 1/8 steps to provide support for the widest range of standard and non-standard baud rates.

In RS-485 mode the board provides automatic control of the RS-485 driver in hardware, eliminating the need for application software control. This allows the 7402e to be used with standard serial communications applications and removes the risk of bus contention and data corruption. Additionally, RS-485 network termination, critical to robust multi-drop communication, can be selectively added to the circuit via DIP-switches.

Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The 7402e is a PCI Express X1 board compatible with any low profile PCI Express slot. If you have a standard size PCI Express slot, be sure to select the standard profile bracket. The board ships with a 36 inch cable that terminates to four DB9M connectors.

• Each port individually configurable for RS-422 or RS-485
• 16C954 buffered UARTs with 128-byte FIFOs
• Oscillator and clock prescalar support wide range of baud rates
• Supports 9-bit protocol framing
• Each port supports data rates to 921.6K bps
• RS-485 line termination, pull-up and pull-down resistors for each port are selectable via dipswitch
• RS-485 ECHO can be enabled/disabled via dipswitch
• Automatic RS-485 enable/disable in hardware
• PCI Express X1 compliant
• Compatible with low profile PCI Express slots
• Included 36″ cable terminates to four DB9M connectors (Item# CA200)

SEA-7205ec 159,00 �

Mon, 05 Nov 2018 16:15:56 +0100

7205ec ULTRA COMM+2.PCIe Low Profile PCI Express 2-Port RS-232, RS-422, RS-485 Serial Interface

Description

The 7205ec low-profile PCI Express serial interface provides two serial ports configurable for RS-232, RS-422

or RS-485. Each serial port features an ultra high-speed UART, flexible clock prescalar, and large 256-byte

Tx/Rx FIFOs allowing the adapter to support the widest range of standard and non-standard baud ratesexceeding

1 Mbps. These features make the 7205ec ideal for data intensive applications that require reliable, ultra-fast

throughput rates.

The electrical interface, echo suppression and line termination are set via convenient on-board DIP switches, which

can be overridden by the Windows devicedriver. Additionally, the Windows driver provides a software-selectable

Slew Rate Limiting feature to minimize electromagnetic interference where high baud ratesare not required. For

rapid troubleshooting, on-board LEDs display the board heartbeat, electrical interface selection and line termination

state.

In RS-485 mode, the transmitter is automatically enabled in hardware for Windows applications, eliminating the

need for software control. This allows the 7205ec to be used with standard serial communications applications and

removes the risk of bus contention and data corruption. In RS-232 mode, all modem control signals are implemented

for maximum compatibility with a wide range of serial peripherals.

The Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows or

Linux operating systems.

The 7205ec is a PCI Express X1 board compatible with any low profile PCI Express slot. If you have a standard size

PCI Express slot, be sure to select the standard profile bracket. The 7205ec is RoHS compliant and meets the

requirements of RoHS (2011/65/EU) directive.

SEA-7204ec 129,00 �

Sun, 04 Nov 2018 19:00:09 +0100

7204ec ULTRA COMM+2.422.PCIe Low Profile PCI Express 2-Port RS-422, RS-485 Serial Interface

Description

The 7204ec low-profile PCI Express serial interface provides two serial ports configurable for RS-422 or RS-485. Each serial port features an ultra high-speed UART, flexible clock prescalar, and large 256-byte Tx/Rx FIFOs allowing the adapter to support the widest range of standard and non-standard baud rates exceeding 1 Mbps. These features make the 7204ec ideal for data intensive applications that require reliable, ultra-fast throughput rates.

In RS-485 mode, the transmitter is automatically enabled in hardware, eliminating the need for application software control. This allows the 7204ec to be used with standard serial communications applications and removes the risk of bus contention and data corruption.

The Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows operating systems.

The 7204ec is a PCI Express X1 board compatible with any low profile PCI Express slot. If you have a standard size PCI Express slot, be sure to select the standard profile bracket. The board includes a 36 inch cable that terminates to two DB9M connectors.

• Compliant with RoHS and WEEE directives
• Each port individually configurable for RS-422 or RS-485
• Electrical interface selection via on-board DIP switch with Windows device driver override
• Windows driver features software-selectable 250K slew rate limiting to minimize electromagnetic interference
• Ultra high-speed UART with 256-byte Tx and Rx FIFOs
• Each port supports data rates exceeding 1 Mbps
• Bus-derived 125 MHz BRG and clock prescalar support wide range of baud rates
• PCI Express X1 compliant
• Compatible with all low profile PCI Express slots (standard profile slots with optional bracket)
• Included 36″ cable terminates to two DB-9M connectors (Item# CA203)

SEA-7106e 139,00 �

Sun, 04 Nov 2018 18:39:59 +0100

7106e ULTRA530.LPCIe Low Profile PCI Express 1-Port RS-232, RS-422, RS-485, RS-530 Serial Interface

Description

The 7106e low-profile PCI Express serial interface provides a single serial port configurable for RS-232, RS-422, RS-485 or RS-530. The ultra high-speed UART, flexible clock prescalar, and large 256-byte Tx/Rx FIFOs allows the adapter to support the widest range of standard and non-standard baud rates exceeding 921.6 K bps. These features make the 7106e ideal for data intensive applications that require reliable, ultra-fast throughput rates.

The electrical interface, echo suppression and line termination are set via convenient on-board DIP switches, which can be overridden by the Windows devicedriver. Additionally, the Windows driver provides a software-selectable Slew Rate Limiting feature to minimize electromagnetic interference where high baud ratesare not required. For rapid troubleshooting, on-board LEDs display the board heartbeat, electrical interface selection and line termination state.

In RS-485 mode, the transmitter is automatically enabled in hardware for Windows applications, eliminating the need for software control. This allows the 7106e to be used with standard serial communications applications and removes the risk of bus contention and data corruption. In RS-232 mode, all modem control signals are implemented for maximum compatibility with a wide range of serial peripherals.

The Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows or Linux operating systems.

The 7106e is a PCI Express X1 board compatible with any low profile PCI Express slot. If you have a standard size PCI Express slot, be sure to select the standard profile bracket. The 7106e is RoHS compliant and meets the requirements of RoHS (2011/65/EU) directive.

• Compliant with RoHS and WEEE directives
• Serial port configurable for RS-232, RS-422, RS-485 or RS-530
• Electrical interface selection via on-board DIP switch with Windows device driver override
• Windows driver features software-selectable 250K slew rate limiting to minimize electromagnetic interference
• Ultra high-speed UART with 256-byte Tx and Rx FIFOs
• Supports asynchronous data rates exceeding 921.6K bps
• Bus-derived 125 MHz BRG and clock prescalar support wide range of baud rates
• Automatic RS-485 enable/disable for Windows applications
• PCI Express X1 compliant
• Compatible with low profile PCI Express slots (standard profile slots with optional bracket)
• All modem control signals implemented in RS-232 mode
• Board includes one DB25M connector

SEA-7202ec 99,00 �

Sun, 04 Nov 2018 18:50:04 +0100

7202ec COMM+232.PCIe Low Profile PCI Express 2-Port RS-232 Serial Interface

Description

The 7202ec low-profile PCI Express serial interface provides two RS-232 serial ports. All modem control signals are implemented for maximum compatibility with a wide range of serial peripherals. Each serial port features an ultra high-speed UART, flexible clock prescalar, and large 256-byte Tx/Rx FIFOs allowing the adapter to support the widest range of standard and non-standard baud rates exceeding 1 Mbps. These features make the 7202ec ideal for data intensive applications that require reliable, ultra-fast throughput rates.

The Sealevel SeaCOM software driver and utilities make installation and operation easy using Microsoft Windows operating systems.

The 7202ec is a PCI Express X1 board compatible with any low profile PCI Express slot. If you have a standard size PCI Express slot, be sure to select the standard profile bracket. The board includes a 36 inch cable that terminates to two DB9M connectors.

• Compliant with RoHS and WEEE directives
• Ultra high-speed UART with 256-byte Tx and Rx FIFOs
• Supports asynchronous data rates exceeding 1 Mbps
• Bus-derived 125 MHz BRG and clock prescalar support wide range of baud rates
• All RS-232 modem control signals implemented
• PCI Express X1 compliant
• Compatible with low profile PCI Express slots (standard profile slots with optional bracket)
• Included 36″ cable terminates to two DB-9M connectors (Item# CA203)