SWD.de/+ Manufacturer +/Sealevel Systems, Inc/SEA-PCI Async. Serial Cables + Accessories products

SEA-RJ25P-232 3,95 �

Sun, 11 Nov 2018 17:27:15 +0100

RJ25P-232 DB25m to RJ45-Preconfigured for SEA-2161, -2167, -7405

Description

The RJ25P-232 converts the female RJ45 RS-232 port on Sealevel serial devices to a male DB25 RS-232 serial port. Standard CAT5 patch cables can be used to extend the serial port up to 50 feet away from the RJ45 port. The RJ25P-232 is preconfigured for use with several Sealevel serial devices, including the 2804, 2807, 2161, 2167, and 7405.

SEA-DB102 14,95 �

Sun, 11 Nov 2018 17:18:11 +0100

DB102 D-Shell Modular Adapter Kit

Description

Includes a DB9 Male, DB9 Female, DB25 Male, and DB25 Female Modular Connectors. Also includes a CA181 RJ45 (CAT5) patch cable. Easily convert any D-shell connector to RJ45 and then back again at the other end.

SEA-RJ9P-232 3,95 �

Sun, 11 Nov 2018 16:52:20 +0100

RJ9P-232 DB9 Male to RJ45 – Preconfigured for RS-232 RJ45 Serial Devices

Description

The RJ9P-232 converts the female RJ45 RS-232 port on Sealevel serial devices to a male DB9 RS-232 serial port. Standard CAT5 patch cables can be used to extend the serial port up to 50 feet away from the RJ45 port. The RJ9P-232 is preconfigured for use with several Sealevel serial devices, including the 2804, 2807, 2161, 2167, and 7405.

SEA-DB112 9,95 �

Sun, 11 Nov 2018 17:12:11 +0100

DB112 DB9 to RJ45 Modular Adapters: DB9f to RJ45-Preconfigured for SEA-7107(rs-485)

Description

The DB112 has a DB9 female connector that plugs directly on to the Sealevel 7107 DB9 male serial port and converts it to an RJ45 connection. Designed for the SeaI/O RS-485 M-series family of devices, the DB112 takes power from pin 9 on the 7107 and sends it out over any standard RJ45 patch cable. This eliminates the need for an external power supply when communicating with SeaI/O RS-485 devices.

Note: Picture shows both sides of modular adapter. Unit quantity is one.

SEA-KT106 43,95 �

Fri, 02 Nov 2018 17:38:45 +0100

KT106 Terminal Block Kit - TB06 + (2) CA127 Cables

Description

The TB06 terminal block has been designed to connect directly to any Sealevel dual DB9 serial board or to serial boards with DB9 cables. If you need to extend the length of your dual DB9 connection, the KT106 includes the TB06 terminal block and two CA127 DB9 extension cables.

SEA-KT105 28,95 �

Fri, 02 Nov 2018 17:36:55 +0100

KT105 Terminal Block Kit - TB05 + CA127 Cable

Description

The KT105 terminal block kit breaks out a DB9 connector to 9 screw terminals to simplify field wiring of serial connections. It is ideal for RS-422 and RS-485 networks, yet it will work with any DB9 serial connection, including RS-232. The KT105 includes one DB9 terminal block (Item# TB05) and one DB9M to DB9F 72 inch extension cable (Item# CA127). The TB05 includes holes for board or panel mounting. The TB05 is designed to connect directly to Sealevel DB9 serial cards or any cable with a DB9M connector.

SEA-KT104 36,95 �

Fri, 02 Nov 2018 17:17:22 +0100

KT104 Terminal Block Kit – TB04 + CA104 Cable

Description

Developed to simplify field wiring requirements, the Terminal Block KT104’s onboard DB25F can be connected directly to boards that include DB25M cables.

SEA-CA190 19,95 �

Sun, 11 Nov 2018 16:40:23 +0100

CA190 DB9 Female to DB9 Female, 72 inchLength – RS-422 207M SMPTE Cable

Description

The CA190 connects any Sealevel DB9 RS-422 device to a Sony (or compatible) 207M (SMPTE) 9 Pin connector.

SEA-CA177 7,95 �

Fri, 02 Nov 2018 17:01:45 +0100


CA177 DB9 Female to DB25 Male Standard RS-232 Modem Cable, 72 inch Length
The CA177 is a standard AT-style RS-232 modem cable with a DB9 female connector on one end and a DB25 male connector on the other end. Simply connect the DB-9F connector to the DB9 serial port on your computer or host, and then connect the DB-25M connector to your RS-232 serial modem or other compatible RS-232 serial device. The six foot cable is fully shielded with dual thumbscrews at each connector. The molded connectors integrate strain relief to prevent damage to the cable or connectors. All DB9 modem control signals are implemented and the cable is pinned to EIA-232 standards.

SEA-CA176 9,95 �

Fri, 02 Nov 2018 17:34:17 +0100

CA176 DB9 Female (RS-422) to DB25 Male (RS-530) Cable, 10 inch Length

Description

DB9 Female (RS-422) to DB25 Male (RS-530) Cable, 10 inch Length. Convert any Sealevel RS-422 DB9 Male Async Adapter to an RS-530 DB25 Male pinout. Useful in situations where RS-530 cabling exists and a multiport Sealevel RS-422 adapter is to be used.

SEA-CA175 9,95 �

Fri, 02 Nov 2018 16:55:47 +0100

CA175 DB25 Female (RS-530) to DB9 Male (RS-422) Cable, 10 inch Length

Description

DB25 Female (RS-530) to DB9 Male (RS-422) Cable, 10 inch Length. Convert any DB25 Female RS-530 Async Adapter to the Sealevel RS-422 DB9 Male pinout. Useful in situations where cabling is already in place for the Sealevel DB9 implementation of RS-422.

SEA-CA127 9,95 �

Fri, 02 Nov 2018 16:49:32 +0100

CA127 DB9 Female to DB9 Male Extension Cable, 72 inch Length

Description

The CA127 is a standard DB9F to DB9M serial extension cable. Extend a DB9 cable or locate a piece of hardware where it is needed with this six foot (72) cable. The connectors are pinned one-to-one so the cable is compatible with any device or cable with DB9 connectors. The cable is fully shielded against interference and the connectors are molded to provide strain relief. Dual metal thumbscrews secure the cable connections and prevent accidental disconnection.

SEA-CA104 7,95 �

Sun, 11 Nov 2018 16:21:28 +0100

CA104 Cables DB25 Female to DB25 Male Extension Cable, 72 inch Length

The CA104 is a standard DB25F to DB25M serial extension cable. Extend a DB25 cable or locate a piece of hardware where it is needed with this six foot (72 inch) cable. The connectors are pinned one-to-one so the cable is compatible with any device or cable with DB25 connectors. The cable is fully shielded against interference and the connectors are molded to provide strain relief. Dual metal thumbscrews secure the cable connections and prevent accidental disconnection.

The CA104 is recommended for RS-232 applications with data rates to 1 Mbps. For RS-422, RS-485 or RS-530 applications, order the CA174 twisted pair extension cable.

SEA-TB06 24,95 �

Fri, 02 Nov 2018 17:40:57 +0100

TB06 Terminal Block - Dual DB9 Female to 18 Screw Terminals

Description

The TB06 terminal block includes dual right-angle DB-9 female connectors to 18 screw terminals (two groups of 9 screw terminals). Useful for breaking out serial and digital I/O signals and simplifies field wiring of RS-422 and RS-485 networks with different pin out configurations.

The TB06 is designed to connect directly to Sealevel dual-port DB9 serial cards or any cable with DB9M connectors and includes holes for board or panel mounting.

SEA-TB05 19,95 �

Fri, 02 Nov 2018 17:29:49 +0100

TB05 Terminal Block – DB9 Female to 9 Screw Terminals

Description

The TB05 terminal block breaks out a DB9 connector to 9 screw terminals to simplify field wiring of serial connections. It is ideal for RS-422 and RS-485 networks, yet it will work with any DB9 serial connection, including RS-232. The TB05 includes holes for board or panel mounting. The TB05 is designed to connect directly to Sealevel DB9 serial cards or any cable with a DB9M connector.

SEA-TB04 27,95 �

Fri, 02 Nov 2018 17:21:44 +0100

TB04 Terminal Block – DB25 Female to 25 Screw Terminals

Description

The TB04 terminal block can be used to break out serial and digital DB25 connectors to 25 screw terminals. The TB04 makes it easy to field wire RS-422 and RS-485 networks with different pin out configurations. Compatible with any cable with a DB-25 male connector.

The TB04 ships with a terminal block only.

• Compliant with RoHS and WEEE directives
• Terminal block has a DB-25F connector and 25 screw terminals
• Connectors and screw terminals are pinned one-to-one • Quickly wire RS-422 and RS-485 networks via CAT5 or other wiring configurations