SWD.de/+ Manufacturer +/Sealevel Systems, Inc/SEA-POWER over ETHERNET 10/100BaseT I/O products

SEA-160PoE 149,00 �

Mon, 26 Nov 2018 16:39:11 +0100

160PoE eI/O PIO-32 Ethernet to 32 Channel TTL Digital I/O Adapter, with PoE (802.3af)

Description

Control and monitor up to 32 channels of buffered drive digital I/O via any 10/100BaseT Ethernet connection with the eI/O-160PoE digital I/O module.

The module addresses the 32 channels of I/O as four eight-bit ports, each programmable as input or output. Use a standard 50-pin IDC ribbon cable to connect an industry standard relay rack for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. The eI/O-160PoE 50-pin (TTL) digital interface is pin compatible with the Sealevel SeaDAC Lite 8126 and accepts the same accessories.

The eI/O-160PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-160PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

Communicate with eI/O Ethernet digital I/O modules using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows operating systems.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development. The Sealevel Mod+ Connect app is an easy-to-use diagnostic utility that allows you to monitor, test and troubleshoot Sealevel eI/O and SeaI/O modules using your iPhone or iPod touch.

• 10/100BaseT Ethernet Modbus TCP interface
• 32 channels of buffered drive TTL I/O
• Each 8-bit port individually configurable as input or output
• 10K pull-up resistors on each port bit
• Industry standard 50-pin solid-state relay rack connector
• +5VDC power and ground provided on 50-pin header connector
• Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status LEDs display power, Ethernet link and I/O activity
• Sealevel SeaMAX software supports Microsoft Windows operating systems
• Housed in rugged, attractive plastic enclosure
• Includes 7′ CAT5 Ethernet cable (Item# CA246)

SEA-110PoE 169,00 �

Mon, 26 Nov 2018 16:04:46 +0100

110PoE eI/O DIO-8 Ethernet to 4 Optically Isolated Inputs / 4 Reed Relay Digital Interface Adapter, with PoE (802.3af)

Description

Control and monitor four optically isolated inputs and four Reed relay outputs via any 10/100BaseT Ethernet connection with the eI/O-110PoE digital I/O module. Inputs can range from 5-30VDC and provide 3500VDC (2500VAC RMS) isolation to ground, while the Reed relays provide long-life switch closures well suited to low-current devices. Each Reed relay has a discrete common and each pair of inputs share a common for easy field wiring via removable 3.5mm terminal blocks.

The eI/O-110PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-110PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

• 10/100BaseT Ethernet Modbus TCP interface
• 4 optically isolated inputs provide protection against surges and ground loops
• 4 SPST Form A Reed relays are well suited to low current devices
• Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
• Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
• Optional removable spring-clamp terminal blocks available for I/O connections
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status LEDs display power, Ethernet link and I/O activity
• Sealevel SeaMAX software supports Microsoft Windows operating systems
• Housed in rugged, attractive plastic enclosure
• Includes 7′ CAT5 Ethernet cable (Item# CA246)

SEA-120PoE 179,00 �

Wed, 02 Jun 2021 23:39:44 +0200

120PoE eI/O PLC-8 Ethernet to 4 Optically Isolated Inputs / 4 Form C Relay Outputs Digital Interface Adapter, with PoE (802.3af)

Description

Control and monitor four optically isolated inputs and four high-current Form C relay outputs via any 10/100BaseT Ethernet connection with the eI/O-120PoEdigital I/O module. Inputs can range from 5-30VDC and provide 3500VDC (2500VAC RMS) isolation to ground, while the high-current Form C relays can switch up to 6A loads at 200VAC and up to 5A at 60VDC. Each Form C relay has a discrete common and includes normally-open and normally-closed contact connections. Each pair of inputs shares a common and field wiring is simplified via 3.5mm field removable terminal blocks.

The eI/O-120PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-120PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

• 10/100BaseT Ethernet Modbus TCP interface
• 4 optically isolated inputs provide protection against surges and ground loops
• 4 high-current SPDT Form C relays can switch up to 5A at 60VDC
• Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
• Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
• Optional removable spring-clamp terminal blocks available for I/O connections
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status LEDs display power, Ethernet link and I/O activity
• Sealevel SeaMAX software supports Microsoft Windows operating systems
• Housed in rugged, attractive plastic enclosure
• Includes 7′ CAT5 Ethernet cable (Item# CA246)

SEA-130PoE 139,00 �

Mon, 26 Nov 2018 16:14:30 +0100

130PoE eI/O ISO-4 Ethernet to 4 Isolated Inputs Digital Interface Adapter, with PoE (802.3af)

Description

Control and monitor four optically isolated inputs via any 10/100BaseT Ethernet connection with the eI/O-130PoE digital I/O module. Inputs can range from 5-30VDC and provide 3500VDC (2500VAC RMS) isolation to ground. Each pair of inputs share a common for easy field wiring via removable 3.5mm terminal blocks.

The eI/O-130PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-130PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

• 10/100BaseT Ethernet Modbus TCP interface
• 4 optically isolated inputs provide protection against surges and ground loops
• Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
• Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
• Optional removable spring-clamp terminal blocks available for I/O connections
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status LEDs display power, Ethernet link and I/O activity
• Sealevel SeaMAX software supports Microsoft Windows operating systems
• Housed in rugged, attractive plastic enclosure
• Includes 7′ CAT5 Ethernet cable (Item# CA246)

SEA-140PoE 149,00 �

Mon, 26 Nov 2018 16:25:29 +0100

140PoE eI/O REL-4 Ethernet to 4 Reed Relay Outputs Digital Interface Adapter, with PoE (802.3af)

Description

Control and monitor four Reed relay outputs via any 10/100BaseT Ethernet connection with the eI/O-140PoE digital I/O module. Reed relays provide long-lifeswitch closures well suited to low current devices. Each Reed relay has a discrete common for easy field wiring via removable 3.5mm terminal blocks.

The eI/O-140PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-140PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

• 10/100BaseT Ethernet Modbus TCP interface
• 4 SPST Form A Reed relays are well suited to low current devices
• Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
• Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
• Optional removable spring-clamp terminal blocks available for I/O connections
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status LEDs display power, Ethernet link and I/O activity
• Sealevel SeaMAX software supports Microsoft Windows operating systems
• Housed in rugged, attractive plastic enclosure
• Includes 7′ CAT5 Ethernet cable (Item# CA246)

SEA-150PoE 159,00 �

Mon, 26 Nov 2018 16:31:11 +0100

150PoE eI/O REL-4C Ethernet to 4 Form C Relay Outputs Digital Interface Adapter, with PoE (802.3af)

Description

Control and monitor four high-current Form C relay outputs via any 10/100BaseT Ethernet connection with the eI/O-150PoE digital I/O module. The Form C relayscan switch up to 6A loads at 200VAC and up to 5A at 60VDC. Each Form C relay has a discrete common and includes normally-open and normally-closed contact connections for easy field wiring via removable 3.5mm terminal blocks.

The eI/O-150PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans).

Ready for DIN rail mounting, the eI/O-150PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

• 10/100BaseT Ethernet Modbus TCP interface
• 4 high-current SPDT Form C relays can switch up to 5A at 60VDC
• Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
• Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
• Optional removable spring-clamp terminal blocks available for I/O connections
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status LEDs display power, Ethernet link and I/O activity
• Sealevel SeaMAX software supports Microsoft Windows operating systems
• Housed in rugged, attractive plastic enclosure
• Includes 7′ CAT5 Ethernet cable (Item# CA246)

SEA-170PoE 209,00 �

Mon, 26 Nov 2018 16:44:11 +0100

170PoE eI/O AIO-8 Ethernet to 8 A/D, 2 Optically Isolated Dry Contact Inputs, 2 Solid-State Relay Outputs, Multifunction I/O Adapter, with PoE (802.3af)

Description

Control and monitor eight 12-bit analog inputs, two optically isolated digital inputs and two solid-state relay outputs via any 10/100BaseT Ethernet connection with the eI/O-170PoE multifunction I/O module.

The module provides eight single-ended or four differential A/D inputs that are software configurable for 0-5V, 0-10V, +/-5V, and +/-10V ranges. The A/D inputs support floating/non-referenced or ground referenced selections. This makes the A/D inputs ideal for measuring floating signal sources such as outputs of transformers, thermistors, and battery-powered devices. Additionally, the A/D inputs can operate in bipolar or unipolar modes.

The digital inputs are dry contact, switch-sensing inputs that are internally biased with 5VDC. When the contact closes, current flows through the circuit and an input condition is detected. The inputs are optically isolated and provide 1000VDC isolation to ground. The solid-state Form A SPST relays can switch up to 60VDC at 2.5A. Solid-state relays improve upon mechanical relays by having no moving parts, operating silently and having virtually unlimited switching cycles.

The eI/O-170PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. This allows power and data to be transferred over a single CAT5 cable and eliminates the need for an external power supply. With PoE, power can be supplied by power sourcing equipment including PoE injectors (midspans) and switches (endspans). I/O connections to field wiring are simplified via removable 3.5mm terminal blocks.

Ready for DIN rail mounting, the eI/O-170PoE includes a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached to any flat surface such as a wall or under a counter. Standard operating temperature range of eI/O Ethernet digital I/O modules is 0C to +70C. Status LEDS on the front show power and I/O activity. Additionally, LEDs on the RJ45 connector display Ethernet link and communication activity.

• 10/100BaseT Ethernet Modbus TCP interface
• 8 12-bit single-ended, or 4 differential analog inputs
• 2 optically isolated inputs provide dry contact switch sensing
• 2 SPST Form A solid-state relays have no moving parts, operate silently and have virtually unlimited switching cycles
• Field wiring is simplified via removable 3.5mm terminal blocks compatible with 16-30 AWG wire
• Ready for DIN rail mounting, removable plastic clip snaps onto 35mm DIN rail or can be attached to walls and other surfaces with optional screws
• Optional removable spring-clamp terminal blocks available for I/O connections
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status LEDs display power, Ethernet link and I/O activity
• Sealevel SeaMAX software supports Microsoft Windows operating systems
• Housed in rugged, attractive plastic enclosure
• Includes 7′ CAT5 Ethernet cable (Item# CA246)