SWD.de/+ Manufacturer +/Sealevel Systems, Inc/SEA-SeaI/O Ethernet 10/100BaseT products

SEA-580E 499,00 �

Mon, 19 Nov 2018 18:49:17 +0100

580E SeaI/O-580E Ethernet Modbus TCP to 32 Isolated Dry-Contact Inputs

Description

Control and monitor 32 isolated, dry contact inputs via any 10/100BaseT Ethernet connection with the SeaI/O-580E. The inputs detect a contact closure between two externally wired field contact points. The dry contact (no-voltage) inputs are ideal for monitoring applications such as alarm contacts, HVAC controls, demux boards, sensing relay contacts, and other control system inputs.

I/O connections are made using convenient 3.5mm field removable screw terminal connectors. Field wiring is simplified since no external power is required to trigger the inputs. The SeaI/O-580E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-580E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

• 10/100BaseT Ethernet Modbus TCP interface
• 32 optically isolated, dry contact inputs
• Removable 3.5 mm screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Status indicator LEDs for Communication, Fault, and Power
• DIN rail mount or table mount
• Easily daisy chain up to 247 units
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
• Includes 7′ CAT5 Ethernet cable (Item# CA246) and 7′ CAT5 Crossover cable (Item# CA251)

SEA-410E 259,00 �

Mon, 19 Nov 2018 19:02:48 +0100

410E SeaI/O-410E Ethernet Modbus TCP to 16 Isolated Inputs / 16 Reed Relay Outputs

Description

Monitor and control 16 optically isolated inputs and 16 Reed relay outputs via any Ethernet connection with the SeaI/O-410E. Inputs can range from 5-30VDC, while the Reed relays provide long-life switch closures well suited to low-current devices. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-410E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-410E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

• 10/100BaseT Ethernet Modbus TCP interface
• 16 SPST Form A Reed relays
• 16 optically isolated inputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-420E 269,00 �

Tue, 20 Nov 2018 12:17:35 +0100

420E SeaI/O-420E Ethernet Modbus TCP to 16 Isolated Inputs / 8 Form C Relay Outputs

Description

Interface 16 optically isolated inputs and 8 Form C relay outputs via any 10/100BaseT Ethernet connection with the SeaI/O-420E. Inputs can range from 5-30VDC while the Form C relay outputs can switch up to 60VDC @ 2A. The SeaI/O-420E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-420E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

• 10/100BaseT Ethernet Modbus TCP interface
• 16 optically isolated inputs
• 8 SPDT Form C Reed relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-430E 289,00 �

Tue, 20 Nov 2018 14:13:45 +0100

430E SeaI/O-430E Ethernet Modbus TCP to 32 Isolated Inputs

Description

Interface 32 optically isolated inputs via any Ethernet connection with the SeaI/O-430E. Inputs can range from 5-30VDC and provide 300V external isolation and high channel-to-channel isolation. Connection is made using convenient 3.5mm removable screw terminal connectors. The SeaI/O-430E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-430E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

• 10/100BaseT Ethernet Modbus TCP interface
• 32 optically isolated inputs
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-440E 289,00 �

Tue, 20 Nov 2018 14:19:22 +0100

440E SeaI/O-440E Ethernet Modbus TCP to 32 Reed Relay Outputs

Description

The SeaI/O-440E provides 32 SPST Form A dry contact Reed relays. Reed relays offer long-life performance and fast response time. Each relay can switch up to 60VDC @ 500mA, and removable 3.5MM screw terminals make wiring easy. Connection to the host device is made via Ethernet 10/100BaseT. The SeaI/O-440E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-440E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

• 10/100BaseT Ethernet Modbus TCP interface
• 32 SPST Form A Reed relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-450E 279,00 �

Tue, 20 Nov 2018 14:35:16 +0100

450E SeaI/O-450E Ethernet Modbus TCP to 16 Form C Relay Outputs

Description

The SeaI/O-450E provides 16 SPDT Form C relays. Connection to the host device is made via Ethernet 10/100BaseT connection. The SeaI/O-450E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-450E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

• 10/100BaseT Ethernet Modbus TCP interface
• 16 SPDT Form C relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-462E 269,00 �

Tue, 20 Nov 2018 14:43:33 +0100

462E SeaI/O-462E Ethernet Modbus TCP to 96 Channel TTL Digital Interface

Description

The SeaI/O-462E Ethernet to digital I/O interface module provides 96 channels of buffered drive digital I/O. The interface module addresses the 96 channels of I/Oas 12 eight-bit ports, each programmable as input or output. Connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems.

The SeaI/O-462E makes the I/O available via dual DB-78 female connectors. For easy connection to relay racks, Sealevel offers a six-foot cable (Item# CA237) that terminates each DB-78 connector to two industry standard 50-pin IDC connectors. The SeaI/O-462E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-462E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

• 10/100BaseT Ethernet Modbus TCP interface
• 96 channels of buffered TTL I/O via two DB-78 female connectors
• Each 8-bit port individually configurable as input or output
• Easily connects to industry standard solid-state relay racks with 50-pin connectors, using optional CA237 cables
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-463E 239,00 �

Tue, 20 Nov 2018 14:49:47 +0100

463E SeaI/O-463E Ethernet Modbus TCP to 96 Channel TTL Digital Interface

Description

The SeaI/O-463E Ethernet to digital I/O interface module provides 96 channels of buffered drive digital I/O. The interface module addresses the 96 channels of I/Oas 12 eight-bit ports, each programmable as input or output. Using standard 50-pin IDC ribbon cables, connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. A metal strain relief bracket is included to secure the cables after installation. The SeaI/O-463E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-463E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

To simplify ribbon cable installation, a printed copy of the Ribbon Cable Installation Instructions is included with all SeaI/O-463 orders.

• 10/100BaseT Ethernet Modbus TCP interface
• 96 channels of buffered TTL I/O
• Each 8-bit port individually configurable as input or output
• Four 50-pin industry standard solid-state relay rack connectors
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-470E 389,00 �

Mon, 19 Nov 2018 17:07:07 +0100

470E SeaI/O-470E Ethernet Modbus TCP to 16 A/D, 2 D/A, 8 Open-Collector Outputs, 8 Isolated Inputs Multifunction Module

Description

Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470E provides eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, 0-10V, +/-5V, and +/-10V ranges and each channel can be configured via hardware for measuring 4-20mA current loop. The two 12-bit D/A channels are jumper selectable for 0-5V and 0-10V output ranges.

Additionally, the SeaI/O-470E module provides eight optically isolated inputs rated for 5-30VDC and feature 300V external isolation, while eight open-collector outputs can sink up to 580mA – ideal for switching 24V devices commonly found in industrial environments. Perfect for a variety of data acquisition/control and test & measurement applications, the SeaI/O-470E includes removable screw terminals, which simplify field-wiring connections. The SeaI/O-470E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-470E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

• 10/100BaseT Ethernet Modbus TCP interface
• 8 differential or 16 single-ended 12-bit inputs
• Two 12-bit D/A output channels
• 8 optically isolated inputs
• 8 open-collector outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-520E 279,00 �

Mon, 19 Nov 2018 17:12:35 +0100

520E SeaI/O-520E Ethernet Modbus TCP to 8 Isolated Inputs / 8 High-Current Form C Relay Outputs

SEA-530E 289,00 �

Mon, 19 Nov 2018 18:16:12 +0100

530E SeaI/O-530E Ethernet Modbus TCP to 16 Isolated Inputs / 16 Open-Collector Outputs

Description

Monitor and control 16 optically isolated inputs and 16 open-collector outputs via any Ethernet connection with the SeaI/O-530E. Inputs can range from 5-30VDC, while the open-collector outputs provide high current sinking over a large operating voltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Inputs are grouped into four-bit segments. Each group shares a common for easy wiring via removable 3.5mm terminal blocks. Outputs are grouped in eight-bit ports which share high and low voltage inputs.

The SeaI/O-530E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-530E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

SEA-540E 359,00 �

Mon, 19 Nov 2018 18:22:03 +0100

540E SeaI/O-540E Ethernet Modbus TCP to 32 Open-Collector Outputs

Description

Control 32 open-collector outputs via any Ethernet connection with the SeaI/O-540E. The open-collector outputs provide high current sinking over a large operating voltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Outputs are grouped in eight-bit ports which share high and low voltage contacts via 3.5mm terminal blocks.

The SeaI/O-540E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-540E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

• 10/100BaseT Ethernet Modbus TCP interface
• 32 open collector outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• Optional DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-570E 379,00 �

Mon, 19 Nov 2018 18:43:14 +0100

570E SeaI/O-570E Ethernet Modbus TCP to 8 16-bit A/D, 8 Isolated Inputs, 8 Form C Relay Outputs Multifunction Module

Description

The SeaI/O-570E, designed using the Linear Technology LTC1867 A/D chip, provides eight single-ended 16-bit analog inputs, eight optically isolated inputs and eight Form C relay outputs.

The A/D inputs are independently software selectable for +/- 5V or +/- 15V ranges and feature high input impedance, allowing easy connection to a variety ofsensors. The A/D inputs support floating/non-referenced or ground referenced selections. This makes the A/D inputs ideal for measuring floating signal sources such as outputs of transformers, thermistors, and battery-powered devices. Additionally, the A/D inputs can operate in bipolar or unipolar modes, and a dipswitch enables a bias voltage of +5 through a 10K resistor for thermistor input mode.

The SeaI/O-570E module features eight optically isolated inputs rated for 5-30VDC and provides 3500 VDC external isolation, while the Form C relays are configurable as normally-open or normally-closed and can switch DC loads up to 24W. Perfect for a variety of data acquisition/control and test & measurement applications, the SeaI/O-570E includes removable terminal blocks, which simplify field-wiring connections.

The SeaI/O-570E is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options. The modules operate over a wide operating temperature range of -20C to +70C and extended temperature range is optional.

Communicate with the SeaI/O-570E using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

• 10/100BaseT Ethernet Modbus TCP interface
• 8 single-ended 16-bit analog inputs
• 8 optically isolated inputs
• 8 Form C relay outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-580PoE 499,00 �

Mon, 19 Nov 2018 18:55:27 +0100

580PoE SeaI/O-580PoE Ethernet Modbus TCP to 32 Isolated Dry-Contact Inputs, with PoE (802.3af)

Description

Control and monitor 32 isolated, dry contact inputs via any 10/100BaseT Ethernet connection with the SeaI/O-580PoE. The inputs detect a contact closure between two externally wired field contact points. The dry contact (no-voltage) inputs are ideal for monitoring applications such as alarm contacts, HVAC controls, demux boards, sensing relay contacts, and other control system inputs.

I/O connections are made using convenient 3.5mm field removable screw terminal connectors. Field wiring is simplified since no external power is required to trigger the inputs.

The SeaI/O-580PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device. Power and data are transferred over a single CAT5 cable, which completely eliminates the need for externally powering the module or I/O. Power from the Ethernet link is converted to 24 VDC and made available to the RS-485 pass-through connector for powering additional SeaI/O expansion modules.

Communicate with the SeaI/O-580PoE using industry standard Modbus TCP protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Additional expansion modules can be added using convenient pass-through connectors.

• 10/100BaseT Ethernet Modbus TCP interface, with PoE (802.3af)
• 32 optically isolated, dry contact inputs
• Removable 3.5 mm screw terminals simplify field wiring
• PoE version allows power and data over a single CAT5 cable, eliminating the need for an external power supply
• Status indicator LEDs for Communication, Fault, and Power
• DIN rail mount or table mount
• Easily daisy chain multiple units
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
• Includes 7′ CAT5 Ethernet cable (Item# CA246) and 7′ CAT5 Crossover cable (Item# CA251)