SWD.de/+ Manufacturer +/Sealevel Systems, Inc/SEA-SeaI/O USB products

SEA-410U 209,00 �

Tue, 20 Nov 2018 15:15:05 +0100

410U SeaI/O-410U USB to 16 Isolated Inputs / 16 Reed Relay Outputs

Description

Control and monitor 16 optically isolated inputs and 16 Reed relay outputs via any USB connection with the SeaI/O-410U. Inputs can range from 5-30VDC, while the Reed relays provide long-life switch closures well suited to low current devices. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-410U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-410U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

The SeaI/O-410U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

• 16 optically isolated inputs
• 16 SPST Form A Reed relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail or table mount
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-420U 219,00 �

Fri, 21 Feb 2020 11:25:17 +0100

420U SeaI/O-420U USB to 16 Isolated Inputs / 8 Form C Relay Outputs

Description

Control and monitor 16 optically isolated inputs and 8 Form C (SPDT) relay outputs via any USB connection with the SeaI/O-420U. Inputs can range from 5-30VDC, while the Form C relays switch up to 60VDC @ 2A. Inputs and outputs are grouped in four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-420U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-420U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-420U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 16 optically isolated inputs
• 8 SPDT Form C relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail or table mount
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-430U 189,00 �

Tue, 20 Nov 2018 17:15:58 +0100

430U SeaI/O-430U USB to 32 Optically Isolated Inputs

Description

Interface 32 optically isolated inputs via any USB connection with the SeaI/O-430U. Inputs can range from 5-30VDC and provide 300V external isolation.Connection is made using convenient 3.5mm removable screw terminal connectors. To facilitate easy wiring, the inputs are grouped in 4-bit segments that each share a common. The SeaI/O-430U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-430U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-430U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 32 optically isolated inputs
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail mount or table mount
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-440U 239,00 �

Tue, 20 Nov 2018 17:22:11 +0100

440U SeaI/O-440U USB to 32 Reed Relay Outputs

Description

The SeaI/O-440U provides 32 SPST Form A dry contact Reed relays. Reed relays offer long-life performance and fast response time. Each relay can switch up to 60VDC @ 500mA, and removable 3.5MM screw terminals make wiring easy. Connection to the host device is made via your computer’s USB port. The SeaI/O-440U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-440U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-440U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 32 SPST Form A Reed relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail mount or table mount
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-450U 229,00 �

Tue, 20 Nov 2018 17:27:28 +0100

450U SeaI/O-450U USB to 16 Form C Relay Outputs

Description

The SeaI/O-450U provides 16 SPDT Form C relays that can be easily controlled from your computer’s USB port. Each relay output is rated for switching up to 60VDC @ 2A. The outputs are grouped in four-bit segments that each share a common for easy wiring. The SeaI/O-450U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-450U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-450U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 16 SPDT Form C relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail mount or table mount
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-462U 219,00 �

Thu, 22 Nov 2018 18:45:47 +0100

462U SeaI/O-462U USB to 96 Channel TTL Digital Interface

Description

Control and monitor up to 96 channels of buffered drive digital I/O via any USB connection with the SeaI/O-462U. The interface module addresses the 96 channels of I/O as 12 eight-bit ports, each programmable as input or output. Connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems.

The SeaI/O-462U makes the I/O available via dual DB-78 female connectors. For easy connection to relay racks, Sealevel offers a six-foot cable (Item# CA237) that terminates each DB-78 to two industry standard 50-pin IDC connectors. The SeaI/O-462U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-462U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-462U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 96 channels of buffered TTL I/O via two DB-78 female connectors
• Each 8-bit port individually configurable as input or output
• Easily connects to industry standard solid-state relay racks with 50-pin connectors, using optional CA237 cables
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail or table mount
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-463U 189,00 �

Thu, 22 Nov 2018 18:52:29 +0100

463U SeaI/O-463U USB to 96 Channel TTL Digital Interface

Description

Control and monitor up to 96 channels of buffered drive digital I/O via any USB connection with the SeaI/O-463U. The interface module addresses the 96 channels of I/O as 12 eight-bit ports, each programmable as input or output. Using standard 50-pin IDC ribbon cables, connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. A metal strain relief bracket is included to secure the cables after installation. The SeaI/O-463U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-463U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

To simplify ribbon cable installation, a printed copy of the Ribbon Cable Installation Instructions is included with all SeaI/O-463U orders.

The SeaI/O-463U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 96 channels of buffered TTL I/O
• Each 8-bit port individually configurable as input or output
• Four 50-pin industry standard solid-state relay rack connectors
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)

SEA-470U 339,00 �

Thu, 22 Nov 2018 18:59:27 +0100

470U SeaI/O-470U USB to 16 A/D, 2 D/A, 8 Open-Collector Outputs, 8 Isolated Inputs Multifunction Module

Description

Control and monitor analog and digital interfaces via any USB connection. Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470U provides eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, 0-10V, +/-5V, and +/-10V ranges and each channel can be configured via hardware for measuring 4-20mA current loop. The two 12-bit D/A channels are jumper selectable for 0-5V and 0-10V output ranges.

Additionally, the SeaI/O-470U module provides eight optically isolated inputs rated for 5-30VDC and feature 300V external isolation, while eight open-collector outputs can sink up to 580mA – ideal for switching 24V devices commonly found in industrial environments. Perfect for a variety of data acquisition/control and test & measurement applications, the SeaI/O-470U includes removable screw terminals, which simplify field-wiring connections. The SeaI/O-470U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-470U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-470U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 8 differential or 16 single-ended 12-bit inputs
• Two 12-bit D/A output channels
• 8 optically isolated inputs
• 8 open-collector outputs
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)

SEA-520U 229,00 �

Thu, 22 Nov 2018 19:06:08 +0100

520U SeaI/O-520U USB to 8 Isolated Inputs / 8 High-Current Form C Relay Outputs

Description

Control and monitor 8 optically isolated inputs and 8 (SPDT) high-current Form C relay outputs via any USB connection with the SeaI/O-520U. Inputs can range from 5-30VDC and optical isolation protects the computer and other sensitive equipment from voltage transients and ground loops that are common in industrial environments. The high-current Form C relays can switch up to 6A loads at 250VAC and up to 5A at 60VDC. Form C relays can be wired for either normally open ornormally closed operation. The SeaI/O-520U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-520U using industry standard Modbus RTU protocol or use the Sealevel SeaMAX API software libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-520U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• USB Modbus RTU interface
• 8 optically isolated inputs
• 8 SPDT high-current Form C relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail or table mount
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-530U 239,00 �

Thu, 22 Nov 2018 19:11:17 +0100

530U SeaI/O-530U USB to 16 Isolated Inputs / 16 Open-Collector Outputs

Description

Control and monitor 16 optically isolated inputs and 16 open-collector outputs via any USB connection with the SeaI/O-530U. Inputs can range from 5-30VDC, while the open-collector outputs provide high current sinking over a large operating voltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Inputs are grouped into four-bit segments. Each group shares a common for easy wiring via removable 3.5mm terminal blocks. Outputs are grouped in eight-bit ports which share high and low voltage inputs.

The SeaI/O-530U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-530U using Sealevel SeaMAX API software libraries or use any Modbus RTU compliant device. Sealevel’s SeaMAX software driversand utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-530U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 16 optically isolated inputs
• 16 open collector outputs
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• Optional DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)

SEA-540U 309,00 �

Thu, 22 Nov 2018 19:16:29 +0100

540U SeaI/O-540U USB to 32 Open-Collector Outputs

Description

Control 32 open-collector outputs via any USB connection with the SeaI/O-540U. The open-collector outputs provide high current sinking over a large operatingvoltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Outputs are grouped in eight-bit ports which share high and low voltage contacts via 3.5mm terminal blocks.

The SeaI/O-540U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-540U using Sealevel SeaMAX API software libraries or use any Modbus RTU compliant device. Sealevel’s SeaMAX software driversand utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-540U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 32 open collector outputs
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• Optional DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)

SEA-570U 329,00 �

Thu, 22 Nov 2018 19:21:06 +0100

570U SeaI/O-570U USB to 8 16-bit A/D, 8 Isolated Inputs, 8 Form C Relay Outputs Multifunction Module

Description

Control and monitor analog and digital interfaces via any USB connection. The SeaI/O-570U, designed using the Linear Technology LTC1867 A/D chip, provides eight single-ended 16-bit analog inputs, eight optically isolated inputs and eight Form C relay outputs.

The A/D inputs are independently software selectable for +/- 5V or +/- 15V ranges and feature high input impedance, allowing easy connection to a variety ofsensors. The A/D inputs support floating/non-referenced or ground referenced selections. This makes the A/D inputs ideal for measuring floating signal sources such as outputs of transformers, thermistors, and battery-powered devices. Additionally, the A/D inputs can operate in bipolar or unipolar modes, and a dipswitch enables a bias voltage of +5 through a 10K resistor for thermistor input mode.

The SeaI/O-570U module features eight optically isolated inputs rated for 5-30VDC and provides 3500 VDC external isolation, while the Form C relays are configurable as normally-open or normally-closed and can switch DC loads up to 24W. Perfect for a variety of data acquisition/control and test & measurement applications, the SeaI/O-570U includes removable terminal blocks, which simplify field-wiring connections.

The SeaI/O-570U is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options. The modules operate over a wide operating temperature range of -20C to +70C and extended temperature range is optional.

Communicate with the SeaI/O-570U using the Sealevel SeaMAX API software libraries or use any Modbus RTU compliant device. Sealevel’s SeaMAX softwaredrivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems.

The SeaI/O-570U integrates Sealevel’s SeaLATCH locking USB port, which is fully compatible with standard USB cables. When used with the included USB cable with a SeaLATCH USB type B connector, the metal thumbscrew provides a secure connection to the device and prevents accidental cable disconnection.

• 8 single-ended 16-bit inputs
• 8 optically isolated inputs
• 8 Form C relay outputs
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• Sealevel’s SeaLATCH locking USB port provides secure connection with SeaLATCH USB cables via metal thumbscrews
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems
• Includes 6′ USB type A to SeaLATCH USB type B device cable (Item# CA356)