SWD.de/+ Manufacturer +/Sealevel Systems, Inc/SEA-SeaI/O Wireless (Modbus TCP) Data Acquisition Modules products

SEA-410W 279,00 �

Sun, 25 Nov 2018 10:41:10 +0100

410W SeaI/O-410W Wi-Fi 802.11b/g Modbus TCP Interface to 16 Isolated Inputs / 16 Reed Relay Outputs

Description

The SeaI/O-410W is a wireless interface to 16 optically isolated inputs and 16 Reed relay outputs. Inputs can range from 5-30VDC, while the Reed relays provide long-life switch closures well suited to low current devices. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-410W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-410W over Wi-Fi (802.11b and 802.11g) networks using the Sealevel SeaMAX API software libraries or use any Modbus TCP compliant device. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

The Sealevel Modbus Connect app for iOS allows you to access the registers, coils and discrete I/O of your Sealevel Modbus devices and is available on the App Store. Use the app to remotely access I/O in the field or for testing and troubleshooting during application development.

Expand your I/O network with SeaI/O N-series products. SeaI/O modules are available with Reed and Form C relays, optically isolated inputs, TTL interfaces, A/D and D/A functionality. Up to 246 additional expansion modules can be added using convenient pass-through connectors.

Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 16 SPST Form A Reed relays
• 16 optically isolated inputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-420W 289,00 �

Sun, 25 Nov 2018 10:46:45 +0100

420W SeaI/O-420W Expansion Module Wi-Fi 802.11b/g Modbus TCP Interface to 16 Isolated Inputs / 8 Form C Relay Output

Description

Control and monitor 16 optically isolated inputs and 8 Form C (SPDT) relay outputs over a wireless network with the SeaI/O-420W. Inputs can range from 5-30VDC, while the Form C relays provide switch closures up to 60VDC @ 2A. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-420W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-420W over Wi-Fi (802.11b and 802.11g) networks using the Sealevel SeaMAX API software libraries or use any Modbus TCP compliant device. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 16 optically isolated inputs
• 8 SPDT Form C Reed relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-430W 259,00 �

Sun, 25 Nov 2018 10:51:48 +0100

430W SeaI/O-430W Expansion Module Wi-Fi 802.11b/g Modbus TCP to 32 Isolated Inputs

Description

Interface 32 optically isolated inputs via a wireless network with the SeaI/O-430W. Inputs can range from 5-30VDC and provide 300V external isolation and high channel-to-channel isolation. Connection is made using convenient 3.5mm removable screw terminal connectors. The SeaI/O-430W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-430W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 32 optically isolated inputs
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-440W 309,00 �

Sun, 25 Nov 2018 10:57:01 +0100

440W SeaI/O-440W Expansion Module Wi-Fi 802.11b/g Modbus TCP to 32 Reed Relay Outputs

Description

The SeaI/O-440W provides 32 SPST Form A dry contact Reed relays. Reed relays offer long-life performance and fast response time. Each relay can switch up to 60VDC @ 500mA, and removable 3.5MM screw terminals make wiring easy. Connection to the host device is made via a wireless network connection. The SeaI/O-440W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-440W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 2 SPST Form A Reed relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-450W 299,00 �

Sun, 25 Nov 2018 11:01:42 +0100

450W SeaI/O-450W Expansion Module Wi-Fi 802.11b/g Modbus TCP to 16 Form C Relay Outputs

Description

The SeaI/O-450W provides 16 SPDT Form C relays. Connection to the host device is made via a wireless network connection. The SeaI/O-450W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-450w over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 16 SPDT Form C relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-462W 289,00 �

Sun, 25 Nov 2018 11:06:43 +0100

462W SeaI/O-462W Expansion Module Wi-Fi 802.11b/g Modbus TCP to 96 Channel TTL Digital Interface

Description

The SeaI/O-462W wireless to digital I/O interface module provides 96 channels of buffered drive digital I/O. The interface module addresses the 96 channels of I/Oas 12 eight-bit ports, each programmable as input or output. Connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems.

The SeaI/O-462W makes the I/O available via dual DB-78 female connectors. For easy connection to relay racks, Sealevel offers a six-foot cable (Item# CA237) that terminates each DB-78 connector to two industry standard 50-pin IDC connectors. The SeaI/O-462W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-462W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 96 channels of buffered TTL I/O via two DB-78 female connectors
• Each 8-bit port individually configurable as input or output
• Easily connects to industry standard solid-state relay racks with 50-pin connectors, using optional CA237 cables
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-463W 259,00 �

Sun, 25 Nov 2018 12:17:29 +0100

463W SeaI/O-463W Expansion Module Wi-Fi 802.11b/g Modbus TCP to 96 Channel TTL Digital Interface

Description

The SeaI/O-463W wireless to digital I/O interface module provides 96 channels of buffered drive digital I/O. The interface module addresses the 96 channels of I/Oas 12 eight-bit ports, each programmable as input or output. Using standard 50-pin IDC ribbon cables, connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. A metal strain relief bracket is included to secure the cables after installation. The SeaI/O-463W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-463W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

To simplify ribbon cable installation, a printed copy of the Ribbon Cable Installation Instructions is included with all SeaI/O-463 orders.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 96 channels of buffered TTL I/O
• Each 8-bit port individually configurable as input or output
• Four 50-pin industry standard solid-state relay rack connectors
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-470W 409,00 �

Sun, 25 Nov 2018 12:24:21 +0100

470W SeaI/O-470W Expansion Module: SeaI/O-470W Wi-Fi 802.11b/g Modbus TCP to 16 A/D, 2 D/A, 8 Open-Collector Outputs, 8 Isolated Inputs Multifunction Module

Description

Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470W provides a wireless network connection to eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, 0-10V, +/-5V, and +/-10V ranges and each channel can be configured via hardware for measuring 4-20mA current loop. The two 12-bit D/A channels are jumper selectable for 0-5V and 0-10V output ranges.

Additionally, the SeaI/O-470W module provides eight optically isolated inputs rated for 5-30VDC and feature 300V external isolation, while eight open-collector outputs can sink up to 580mA – ideal for switching 24V devices commonly found in industrial environments. Perfect for a variety of data acquisition/control and test & measurement applications, the SeaI/O-470W includes removable screw terminals, which simplify field-wiring connections. The SeaI/O-470W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-470W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 8 differential or 16 single-ended 12-bit inputs
• Two 12-bit D/A output channels
• 8 optically isolated inputs
• 8 open-collector outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-520W 299,00 �

Sun, 25 Nov 2018 12:30:20 +0100

520W SeaI/O-520W Expansion Module Wi-Fi 802.11b/g Modbus TCP to 8 Isolated Inputs / 8 High-Current Form C Relay Outputs

Description

The Sea/O-520W provides a wireless network connection to eight optically isolated inputs and eight high-current Form C relay outputs. Inputs can range from 5-30VDC and optical isolation protects the computer and other sensitive equipment from voltage transients and ground loops that are common in industrial environments. The high-current Form C relays can switch up to 6A loads at 250VAC and up to 5A at 60VDC. Form C relays can be wired for either normally open ornormally closed operation. The SeaI/O-520W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-520W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windows and Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 8 optically isolated inputs
• 8 SPDT high-current Form C relays
• Removable screw terminals simplify field wiring
• Input power via terminal block or modular connector
• DIN rail mount or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-530W 309,00 �

Sun, 25 Nov 2018 12:36:37 +0100

530W SeaI/O-530W Expansion Module Wi-Fi 802.11b/g Modbus TCP to 16 Isolated Inputs / 16 Open-Collector Outputs

Description

Monitor and control 16 optically isolated inputs and 16 open-collector outputs via a wireless network with the SeaI/O-530W. Inputs can range from 5-30VDC, while the open-collector outputs provide high current sinking over a large operating voltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Inputs are grouped into four-bit segments. Each group shares a common for easy wiring via removable 3.5mm terminal blocks. Outputs are grouped in eight-bit ports which share high and low voltage inputs.

The SeaI/O-530W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-530W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 16 optically isolated inputs
• 16 open collector outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• Optional DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-540W 379,00 �

Sun, 25 Nov 2018 12:41:23 +0100

540W SeaI/O-540W Expansion Module: SeaI/O-520W Wi-Fi 802.11b/g Modbus TCP to 32 Open-Collector Outputs

Description

Control 32 open-collector outputs via a wireless network with the SeaI/O-540W. The open-collector outputs provide high current sinking over a large operatingvoltage. Each open-collector output circuit includes a flyback diode for protection when interfacing highly inductive loads, such as DC motors. Outputs are grouped in eight-bit ports which share high and low voltage contacts via 3.5mm terminal blocks.

The SeaI/O-540W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.

Communicate with the SeaI/O-540W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

Get a jump start on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 32 open collector outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• Optional DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems

SEA-570W 399,00 �

Sun, 25 Nov 2018 12:47:58 +0100

570M SeaI/O-570W Expansion Modul Wi-Fi 802.11b/g Modbus TCP to 8 16-bit A/D, 8 Isolated Inputs, 8 Form C Relay Outputs Multifunction Module

Description

The SeaI/O-570W, designed using the Linear Technology LTC1867 A/D chip, provides eight single-ended 16-bit analog inputs, eight optically isolated inputs and eight Form C relay outputs.

The A/D inputs are independently software selectable for +/- 5V or +/- 15V ranges and feature high input impedance, allowing easy connection to a variety ofsensors. The A/D inputs support floating/non-referenced or ground referenced selections. This makes the A/D inputs ideal for measuring floating signal sources such as outputs of transformers, thermistors, and battery-powered devices. Additionally, the A/D inputs can operate in bipolar or unipolar modes, and a dipswitch enables a bias voltage of +5 through a 10K resistor for thermistor input mode.

The SeaI/O-570W module features eight optically isolated inputs rated for 5-30VDC and provides 3500 VDC external isolation, while the Form C relays are configurable as normally-open or normally-closed and can switch DC loads up to 24W. Perfect for a variety of data acquisition/control and test & measurement applications, the SeaI/O-570W includes removable terminal blocks, which simplify field-wiring connections.

The SeaI/O-570W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options. The modules operate over a wide operating temperature range of -20C to +70C and extended temperature range is optional.

Communicate with the SeaI/O-570W over Wi-Fi (802.11b and 802.11g) networks using industry standard Modbus TCP protocol or use the Sealevel SeaMAX APIsoftware libraries from your application program. Sealevel’s SeaMAX software drivers and utilities make installation and operation easy using Microsoft Windowsand Linux operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.

• Complies with 802.11g and 802.11b (2.4GHz) networking standards
• Wireless security supports WEP, WPA-TKIP, and WPA2-AES encryption standards
• 8 single-ended 16-bit analog inputs
• 8 optically isolated inputs
• 8 Form C relay outputs
• Removable screw terminals simplify field wiring
• Status indicator LEDs for Communication, Fault, and Power
• Input power via terminal block or modular connector
• DIN rail or table mount
• Sealevel SeaMAX software supports Microsoft Windows and Linux operating systems