SWD.de/+ Manufacturer +/Soarland+HEXIN Technology, Ltd./SOA-HEX-Fiber Media Converters products

SOA-HTB-GS-03-C 131,00 �

Sat, 06 Jul 2013 11:43:28 +0200

HTB-GS-03-C netLINK Gigabit Single-mode Fiber Optic Ethernet Media Convert Card

Model: HTB-GS-03-C

Name: netLINK Gigabit Single-mode Fiber Optic Ethernet Media Convert Card

Description

HTB-GS-03-C is a 10/100/1000M self-adapted single-module with transmittal distance 25KM media converter, this card type media converter can be used with our 16 slots media converter rack mount chassis and powered by it, easy installation and maintainance for network station connection. you can also order single-fiber type.

netLINK Series Gigabit Fiber Converter can convert Optical－Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and?diagnose the failure of converters.

Feature

Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover.
Supporting the max 1536 byte Ethernet packet
Supporting flow control
Adopting internal power supply

Specification

Operating standards： IEEE802.3z/AB 1000Base-T, 1000Base-SX/LX
MAC address table：4K
Data Buffer：256K
Connector:
- UTP: RJ-45, 10/100/1000Mbps
- Fiber: SC,1000Mbps
Cable:
- UTP: Cat 5e or Cat 6 (the max distance up to 100m)
- Fiber (multimode):?50/125, 62.5/125μm (the max distance up to 550/224m)
- Fiber (singlemode): 8.3/125, 8.7/125, 9/125μm (the max distance up to 100km)
Flow Control
- Full Duplex: IEEE802.3x flow control
- Half Duplex: back pressure flow control
Power:??AC110-240V to?DC5V; DC 48V to DC5V
Ambient temperature: 0 ～ 50℃
Storage temperature: -40 ～ 70℃
Humidity: 5% ～ 90%
Dimensions: 40 (high) x 110 (width) x 140 (length) mm

SOA-HTB-GM-03-C 131,00 �

Sat, 06 Jul 2013 11:39:19 +0200

HTB-GM-03-C netLINK Gigabit Multi-mode Fiber Optic Ethernet Media Convert Card

Model: HTB-GM-03-C

Name: netLINK Gigabit Multi-mode Fiber Optic Ethernet Media Convert Card

Description

HTB-GM-03-C is a 10/100/1000M self-adapted muti-module with transmittal distance 2KM media converter, this card type media converter can be used with our 16 slots media converter rack mount chassis and powered by it, easy installation and maintainance for network station connection.

netLINK Series Gigabit Fiber Converter can convert Optical－Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and?diagnose the failure of converters.

Feature

Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover.
Supporting the max 1536 byte Ethernet packet
Supporting flow control
Adopting internal power supply

Specification

Operating standards： IEEE802.3z/AB 1000Base-T, 1000Base-SX/LX
MAC address table：4K
Data Buffer：256K
Connector:
- UTP: RJ-45, 10/100/1000Mbps
- Fiber: SC,1000Mbps
Cable:
- UTP: Cat 5e or Cat 6 (the max distance up to 100m)
- Fiber (multimode):?50/125, 62.5/125μm (the max distance up to 550/224m)
- Fiber (singlemode): 8.3/125, 8.7/125, 9/125μm (the max distance up to 100km)
Flow Control
- Full Duplex: IEEE802.3x flow control
- Half Duplex: back pressure flow control
Power:??AC110-240V to?DC5V; DC 48V to DC5V
Ambient temperature: 0 ～ 50℃
Storage temperature: -40 ～ 70℃
Humidity: 5% ～ 90%
Dimensions: 40 (high) x 110 (width) x 140 (length) mm

SOA-HTB-RACK-A 175,00 �

Sat, 06 Jul 2013 11:54:43 +0200

HTB-RACK-A netLINK 14 Slots Rack for Media Converter

Model: HTB-RACK-A

Name: netLINK 14 Slots Rack for Media Converter

Description

HTB-RACK-A for Media converter adapt integration management media converter Rack in machine room. Each Rack have 14 insert slots, can insert 1-14 different media converters. Redundant Power Supply, support hot-swappable, provide credibility, high effect and economic solutions for network system.

Feature

Adopt insert-draw design, Easy to load and unload, Plug-and-play, support hot-swappable
19 inch 2U, easy to install
Each Rack have 14 insert slots, can insert 1-14 different media converters, high capability, easy to upgrade
Full aluminums metal shell, high shield, high anti-jamming
Adopt auto-adapt technology. Do not adjust electrics and optics when installation
Redundant Power Supply, Low consumption, and credibility
Full working indicator light, easy to maintenance
Average no MTBF is up to 50 thousands, accord to telecom standard

Specification

Parameter
Working Temperature：0°C to 50°C
Storage Temperature：-40°C to 85°C
Relative Humidity：5%~95%
Dimension：485*245*90MM
19 Inch 2U
Power supply Require
Input: AC 100~260V,50~60HZ
Out put：DC +5V
Consumption：＜60W
Wave：≤50mv
Noise：≤50mv

SOA-HTB-1100S-C 43,50 �

Sat, 06 Jul 2013 10:46:56 +0200

HTB-1100S-C netLINK 10/100M Single-mode Fiber Optic Ethernet Media Convert Card

Model: HTB-1100S-C

Name: netLINK 10/100M Single-mode Fiber Optic Ethernet Media Convert Card

Description

HTB-1100S-C is a 10/100M self-adapted single-module with transmittal distance 25KM media converter, this card type media converter can be used with our 16 slots media converter rack mount chassis and powered by it, easy installation and maintainance for network station connection.
br />netLINK Series Fiber Media Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 120km through optical fiber link. The performance and quality of the products are excellent because of adopting latest IC. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for users to observe the network operations. The Series products with reasonable price are especially designed for network users.

Feature

Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
UTP port supports MDI/MDI-X auto crossover.
Multiple optical interface to be chosen: SC,ST or FC,singlemode/multimode
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: ST/SC/FC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber (Multimode): 50/125, 62.5/125m(the max distance up to 2km or 5km)
- Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125m(the max distance up to 20 -120km)
Flow Control
- Full Duplex: Supporting standard IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V-240V to?DC 5V; DC 48V to DC 5V.
Ambient Temperature: 0 70
Humidity: 5% 90%
Dimensions:
- Internal power: 30110140mm
- External power: 267093mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-1100	multimode	ST/SC	850/1310nm	-20~-12dBm	-30dBm	2km	10dBm
HTB-1100-5	multimode	ST/SC	850/1310nm	-12~-6dBm	-32dBm	5km	20dBm
HTB-1100S-20	singlemode	ST/SC	1310nm	-14~-8dBm	-32dBm	20km	18dBm
HTB-1100S-40	singlemode	SC	1310nm	-8~-3dBm	-33dBm	40km	25dBm
HTB-1100S-60	singlemode	SC	1310nm	-3~0dBm	-38dBm	60km	35dBm
HTB-1100S-80	singlemode	SC	1550nm	-8~-3dBm	-35dBm	80km	27dBm
HTB-1100S-100	singlemode	SC	1550nm	-5~0dBm	-36dBm	100km	31dBm
HTB-1100S-120	singlemode	SC	1550nm	-3~3dBm	-38dBm	120km	35dBm

SOA-HTB-RACK-B 180,00 �

Sat, 06 Jul 2013 11:59:46 +0200

HTB-RACK-B netLINK 16 Slots Rack for Media Convert Card

Model: HTB-RACK-B

Name: netLINK 16 Slots Rack for Media Convert Card

Description

HTB-RACK-B for Media converter adapt integration management media converter Rack in machine room. Each Rack have 16 insert slots, can insert 1-16 different media converte card. Redundant Power Supply, support hot-swappable, provide credibility, high effect and economic solutions for network system.

Feature

Adopt insert-draw design, Easy to load and unload, Plug-and-play, support hot-swappable
19 inch 2U, easy to install
Each Rack have 16 insert slots, can insert 1-16 different media converters, high capability, easy to upgrade
Full aluminums metal shell, high shield, high anti-jamming
Adopt auto-adapt technology. Do not adjust electrics and optics when installation
Redundant Power Supply, Low consumption, and credibility
Full working indicator light, easy to maintenance
Average no MTBF is up to 50 thousands, accord to telecom standard

Specification

SOA-HTB-1100 37,50 �

Tue, 23 Jun 2020 16:08:05 +0200

HTB-1100 netLINK 10/100M Multi-mode Fiber Optic Ethernet Media Converter

Model: HTB-1100

Name: netLINK 10/100M Multi-mode Fiber Optic Ethernet Media Converter

Description

netLINK Series Fiber Media Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 120km through optical fiber link. The performance and quality of the products are excellent because of adopting latest IC. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for users to observe the network operations. The Series products with reasonable price are especially designed for network users.

Feature

Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
UTP port supports MDI/MDI-X auto crossover.
Multiple optical interface to be chosen: SC,ST or FC,singlemode/multimode
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: ST/SC/FC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber (Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)
- Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
Flow Control
- Full Duplex: Supporting standard IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V-240V to DC 5V; DC 48V to DC 5V.
Ambient Temperature: 0 ～ 70℃
Humidity: 5% ～ 90%
Dimensions:
- Internal power: 30×110×140mm
- External power: 26×70×93mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-1100	multimode	ST/SC	850/1310nm	-20~-12dBm	-30dBm	2km	10dBm
HTB-1100-5	multimode	ST/SC	850/1310nm	-12~-6dBm	-32dBm	5km	20dBm
HTB-1100S-20	singlemode	ST/SC	1310nm	-14~-8dBm	-32dBm	20km	18dBm
HTB-1100S-40	singlemode	SC	1310nm	-8~-3dBm	-33dBm	40km	25dBm
HTB-1100S-60	singlemode	SC	1310nm	-3~0dBm	-38dBm	60km	35dBm
HTB-1100S-80	singlemode	SC	1550nm	-8~-3dBm	-35dBm	80km	27dBm
HTB-1100S-100	singlemode	SC	1550nm	-5~0dBm	-36dBm	100km	31dBm
HTB-1100S-120	singlemode	SC	1550nm	-3~3dBm	-38dBm	120km	35dBm

SOA-HTB-1100S 46,00 �

Fri, 17 Jul 2020 11:02:34 +0200

HTB-1100S netLINK 10/100M Single-mode Fiber Optic Ethernet Media Converter

Model: HTB-1100S

Name: netLINK 10/100M Single-mode Fiber Optic Ethernet Media Converter

Description

Feature

Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
UTP port supports MDI/MDI-X auto crossover.
Multiple optical interface to be chosen: SC,ST or FC,singlemode/multimode
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: ST/SC/FC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber (Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)
- Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
Flow Control
- Full Duplex: Supporting standard IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V-240V to DC 5V; DC 48V to DC 5V.
Ambient Temperature: 0 ～ 70℃
Humidity: 5% ～ 90%
Dimensions:
- Internal power: 30×110×140mm
- External power: 26×70×93mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-1100	multimode	ST/SC	850/1310nm	-20~-12dBm	-30dBm	2km	10dBm
HTB-1100-5	multimode	ST/SC	850/1310nm	-12~-6dBm	-32dBm	5km	20dBm
HTB-1100S-20	singlemode	ST/SC	1310nm	-14~-8dBm	-32dBm	20km	18dBm
HTB-1100S-40	singlemode	SC	1310nm	-8~-3dBm	-33dBm	40km	25dBm
HTB-1100S-60	singlemode	SC	1310nm	-3~0dBm	-38dBm	60km	35dBm
HTB-1100S-80	singlemode	SC	1550nm	-8~-3dBm	-35dBm	80km	27dBm
HTB-1100S-100	singlemode	SC	1550nm	-5~0dBm	-36dBm	100km	31dBm
HTB-1100S-120	singlemode	SC	1550nm	-3~3dBm	-38dBm	120km	35dBm

SOA-HTB-1100S-W1/2 148,00 �

Fri, 05 Jul 2013 17:45:20 +0200

HTB-1100S-W1/2 netLINK 10/100M Single-mode WDM Fiber Optic Ethernet Media Converter

Model: HTB-1100S-W1/2

Name: netLINK 10/100M Single-mode WDM Fiber Optic Ethernet Media Converter

Description

netLINK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.

Feature

The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover
Supporting flow control
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: SC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber(Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)
Flow Control
- Full Duplex: IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V - 220V to DC 5V; DC48V to DC 5V
Ambient temperature：0 ～ 50℃
Storage temperature：-20 ～ +70℃
Humidity: 5% ～ 90%
Dimensions:
- Internal power: 30×110×140mm
- External power: 26×70×93mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-1100S-W1/2-20	singlemode	SC	1310/1550nm	-14~-6dBm	-32dBm	20km	18dBm
HTB-1100S-W1/2-40	singlemode	SC	1310/1550nm	-5~0 dBm	-35dBm	40km	30dBm
HTB-1100S-W1/2-60	singlemode	SC	1310/1550nm	-8~-2 dBm	-36dBm	60km	28dBm
HTB-1100S-W1/2-80	singlemode	SC	1310/1550nm	-3~0 dBm	-37dBm	80km	34dBm
Note
10/100M Singlemode Single Fiber Converters must be used and ordered in couples. One set of W1 must be connected with another set of W2 for using. W1 transmitted optical wavelength 1310nm, receive optical wavelength 1550nm; W2 transmitted optical wavelength 1550nm, receive optical wavelength 1310nm. The distance of fiber is up to 20, 40, 60, 80km.

SOA-HTB-GS-03 131,00 �

Thu, 30 Sep 2021 15:18:17 +0200

HTB-GS-03 netLINK 10/100M/1000M Single-mode Fiber Optic Ethernet Media Converter

Model: HTB-GS-03

Name: netLINK 10/100M/1000M Single-mode Fiber Optic Ethernet Media Converter

Description

netLINK Series Gigabit Fiber Converter can convert Optical－Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and?diagnose the failure of converters.

Feature

Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover.
Supporting the max 1536 byte Ethernet packet
Supporting flow control
Adopting internal power supply

Specification

Operating standards： IEEE802.3z/AB 1000Base-T, 1000Base-SX/LX
MAC address table：4K
Data Buffer：256K
Connector:
- UTP: RJ-45, 10/100/1000Mbps
- Fiber: SC,1000Mbps
Cable:
- UTP: Cat 5e or Cat 6 (the max distance up to 100m)
- Fiber (multimode): 50/125, 62.5/125μm (the max distance up to 550/224m)
- Fiber (singlemode): 8.3/125, 8.7/125, 9/125μm (the max distance up to 100km)
Flow Control
- Full Duplex: IEEE802.3x flow control
- Half Duplex: back pressure flow control
Power: AC110-240V to DC5V; DC 48V to DC5V.
Ambient temperature: 0 ～ 50℃
Storage temperature: -40 ～ 70℃
Humidity: 5% ～ 90%
Dimensions: 40 (high) x 110 (width) x 140 (length) mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-GS-03-25KM	singlemode	SC	1310nm	-5~0 dBm	-22dBm	25km	13dBm
HTB-GS-03-40KM	singlemode	SC	1550nm	-8~0dBm	-14dBm	40km	16dBm

SOA-HTB-3100 HTB-3100A/B 148,00 �

Fri, 05 Jul 2013 17:56:55 +0200

HTB-3100 HTB-3100A/B netLINK 10/100M Single-mode Single-fiber WDM Fiber Media Converter

Model: HTB-3100 HTB-3100A/B

Name: netLINK 10/100M Single-mode Single-fiber WDM Fiber Media Converter

Description

Feature

The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover
Supporting flow control
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: SC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber(Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)
Flow Control
- Full Duplex: IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V - 220V to DC 5V; DC48V to DC 5V
Ambient temperature：0 ～ 50℃
Storage temperature：-20 ～ +70℃
Humidity: 5% ～ 90%
Dimensions:
- Internal power: 30×110×140mm
- External power: 26×70×93mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-3100A/B-25	singlemode	SC	1310/1550nm	-14~-6dBm	-32dBm	20km	18dBm
HTB-3100A/B-40	singlemode	SC	1310/1550nm	-5~0 dBm	-35dBm	40km	30dBm
HTB-3100A/B-60	singlemode	SC	1310/1550nm	-8~-2 dBm	-36dBm	60km	28dBm
HTB-3100A/B-80	singlemode	SC	1310/1550nm	-3~0 dBm	-37dBm	80km	34dBm
Note
10/100M Singlemode Single Fiber Converters must be used and ordered in couples. One set of W1 must be connected with another set of W2 for using. W1 transmitted optical wavelength 1310nm, receive optical wavelength 1550nm; W2 transmitted optical wavelength 1550nm, receive optical wavelength 1310nm. The distance of fiber is up to 20, 40, 60, 80km.

SOA-HTB-GM-03 131,00 �

Fri, 05 Jul 2013 18:07:33 +0200

HTB-GM-03 netLINK 10/100M/1000M Multi-mode Fiber Optic Ethernet Media Converter

Model: HTB-GM-03

Name: netLINK 10/100M/1000M Multi-mode Fiber Optic Ethernet Media Converter

Description

Feature

Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover.
Supporting the max 1536 byte Ethernet packet
Supporting flow control
Adopting internal power supply

Specification

Operating standards： IEEE802.3z/AB 1000Base-T, 1000Base-SX/LX
MAC address table：4K
Data Buffer：256K
Connector:
- UTP: RJ-45, 10/100/1000Mbps
- Fiber: SC,1000Mbps
Cable:
- UTP: Cat 5e or Cat 6 (the max distance up to 100m)
- Fiber (multimode): 50/125, 62.5/125μm (the max distance up to 550/224m)
- Fiber (singlemode): 8.3/125, 8.7/125, 9/125μm (the max distance up to 100km)
Flow Control
- Full Duplex: IEEE802.3x flow control
- Half Duplex: back pressure flow control
Power: AC110-240V to DC5V; DC 48V to DC5V.
Ambient temperature: 0 ～ 50℃
Storage temperature: -40 ～ 70℃
Humidity: 5% ～ 90%
Dimensions: 40 (high) x 110 (width) x 140 (length) mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-GM-03-2KM	multimode	SC	850nm	-10~-3dBm	-18dBm	550m	8dBm

SOA-HTB-1100-C 37,00 �

Sat, 06 Jul 2013 10:38:51 +0200

HTB-1100-C netLINK 10/100M Multi-mode Fiber Optic Ethernet Media Convert Card

Model: HTB-1100-C

Name: netLINK 10/100M Multi-mode Fiber Optic Ethernet Media Convert Card

Description

HTB-1100-C is a 10/100M self-adapted muti-module with transmittal distance 2KM media converter, this card type media converter can be used with our 16 slots media converter rack mount chassis and powered by it, easy installation and maintainance for network station connection.

netLINK Series Fiber Media Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 120km through optical fiber link. The performance and quality of the products are excellent because of adopting latest IC. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for users to observe the network operations. The Series products with reasonable price are especially designed for network users.

Feature

Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
UTP port supports MDI/MDI-X auto crossover.
Multiple optical interface to be chosen: SC,ST or FC,singlemode/multimode
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: ST/SC/FC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber (Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)
- Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
Flow Control
- Full Duplex: Supporting standard IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V-240V to?DC 5V; DC 48V to DC 5V.
Ambient Temperature: 0 ～ 70℃
Humidity: 5% ～ 90%
Dimensions:
- Internal power: 30×110×140mm
- External power: 26×70×93mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-1100	multimode	ST/SC	850/1310nm	-20~-12dBm	-30dBm	2km	10dBm
HTB-1100-5	multimode	ST/SC	850/1310nm	-12~-6dBm	-32dBm	5km	20dBm
HTB-1100S-20	singlemode	ST/SC	1310nm	-14~-8dBm	-32dBm	20km	18dBm
HTB-1100S-40	singlemode	SC	1310nm	-8~-3dBm	-33dBm	40km	25dBm
HTB-1100S-60	singlemode	SC	1310nm	-3~0dBm	-38dBm	60km	35dBm
HTB-1100S-80	singlemode	SC	1550nm	-8~-3dBm	-35dBm	80km	27dBm
HTB-1100S-100	singlemode	SC	1550nm	-5~0dBm	-36dBm	100km	31dBm
HTB-1100S-120	singlemode	SC	1550nm	-3~3dBm	-38dBm	120km	35dBm

SOA-HTB-3100A-C 148,00 �

Sat, 06 Jul 2013 11:27:50 +0200

HTB-3100A-C netLINK 10/100M Single-mode Single-fiber WDM Fiber Media Convert Card

Model: HTB-3100A-C

Name: netLINK 10/100M Single-mode Single-fiber WDM Fiber Media Convert Card

Description

HTB-3100A-C is a 10/100M self-adapted single-fiber single-module with transmittal distance 25KM media converter, this card type media converter can be used with our 16 slots media converter rack mount chassis and powered by it, easy installation and maintainance for network station connection. it should be work with HTB-3100B-C.

netLINK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.

Feature

The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover
Supporting flow control
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: SC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber(Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)
Flow Control
- Full Duplex: IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V - 220V to DC 5V; DC48V to DC 5V
Ambient temperature：0 ～ 50℃
Storage temperature：-20 ～ +70℃
Humidity: 5% ～ 90%
Dimensions:
- Internal power: 30×110×140mm
- External power: 26×70×93mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-3100A/B-25	singlemode	SC	1310/1550nm	-14~-6dBm	-32dBm	20km	18dBm
HTB-3100A/B-40	singlemode	SC	1310/1550nm	-5~0 dBm	-35dBm	40km	30dBm
HTB-3100A/B-60	singlemode	SC	1310/1550nm	-8~-2 dBm	-36dBm	60km	28dBm
HTB-3100A/B-80	singlemode	SC	1310/1550nm	-3~0 dBm	-37dBm	80km	34dBm
Note
10/100M Singlemode Single Fiber Converters must be used and ordered in couples. One set of W1 must be connected with another set of W2 for using. W1 transmitted optical wavelength 1310nm, receive optical wavelength 1550nm; W2 transmitted optical wavelength 1550nm, receive optical wavelength 1310nm. The distance of fiber is up to 20, 40, 60, 80km.

SOA-HTB-3100B-C 148,00 �

Sat, 06 Jul 2013 11:33:09 +0200

HTB-3100B-C netLINK 10/100M Single-mode Single-fiber WDM Fiber Media Convert Card

Model: HTB-3100B-C

Name: netLINK 10/100M Single-mode Single-fiber WDM Fiber Media Convert Card

Description

HTB-3100B-C is a 10/100M self-adapted single-fiber single-module with transmittal distance 25KM media converter, this card type media converter can be used with our 16 slots media converter rack mount chassis and powered by it, easy installation and maintainance for network station connection. it should be work with HTB-3100A-C.

netLINK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.

Feature

The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex.
UTP port supports MDI / MDI-X auto crossover
Supporting flow control
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: SC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber(Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)
Flow Control
- Full Duplex: IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V - 220V to DC 5V; DC48V to DC 5V
Ambient temperature：0 ～ 50℃
Storage temperature：-20 ～ +70℃
Humidity: 5% ～ 90%
Dimensions:
- Internal power: 30×110×140mm
- External power: 26×70×93mm

Order Information
Type	Fiber type	Connector	Wavelength	TX power	Sensitivity	Max.distance	Link Budget
HTB-3100A/B-25	singlemode	SC	1310/1550nm	-14~-6dBm	-32dBm	20km	18dBm
HTB-3100A/B-40	singlemode	SC	1310/1550nm	-5~0 dBm	-35dBm	40km	30dBm
HTB-3100A/B-60	singlemode	SC	1310/1550nm	-8~-2 dBm	-36dBm	60km	28dBm
HTB-3100A/B-80	singlemode	SC	1310/1550nm	-3~0 dBm	-37dBm	80km	34dBm
Note
10/100M Singlemode Single Fiber Converters must be used and ordered in couples. One set of W1 must be connected with another set of W2 for using. W1 transmitted optical wavelength 1310nm, receive optical wavelength 1550nm; W2 transmitted optical wavelength 1550nm, receive optical wavelength 1310nm. The distance of fiber is up to 20, 40, 60, 80km.