SWD.de/+ Manufacturer +/Soarland+HEXIN Technology, Ltd./SOA-HEX-Serial Converters products

SOA-HXSP-2108A 31,70 �

Sat, 23 Mar 2019 11:59:20 +0100

HXSP-2108A Optical Isolation RS-232 to RS-485 Converter

Model: HXSP-2108A

Name: Optical Isolation RS-232 to RS-485 Converter

Description :

HXSP-2108A converter is the communication converter which change RS-232 signal to RS-485 signal completely isolate. It has the strong drive capability which can drive max to 64 devices on the bus. The communication distance max up to 1000 meters. It is designed elegantly, easy to connect wire, convenient to use. It is widely used in industrial monitoring, civilian PTZ monitoring, and industrial control equipment, and other fields

Specification & Features:

Standard: Accord EIA RS-232, RS-485 standard.
Connector: DB9 female on RS-232 side, 3 terminal block on RS-485 side.
Optical isolation voltage: 2.5kv pulse/500v continuous
Work methods: asynchronous, point to point or multi-point, 2 wire half-duplex.
Transmission medium: Ordinary Line , twisted pair cable or Shielded Wire
Baud rate: 300~115000bps.
Transmission distance:1km (9600bps)
Power Supply: 12VDC/mA.
Dimension : 53mm x 80mm x 20mm

SOA-HXSP-2108B 33,50 �

Sat, 29 Jun 2013 19:49:01 +0200

HXSP-2108B Commercial Level RS-232 to RS-485/RS-422 Converter

Model: HXSP-2108B

Name: Commercial Level RS-232 to RS-485/RS-422 Converter

Description :

HXSP-2108B is a multifunctional converter with external power supply, it compatible with RS-232/RS-485/RS-422 standard. It can change the single-ended RS-232 signal to balanced RS-485/RS-422 signal, RS-232 interface use the DB9 female connector connect with the serial of computer ,on the other side RS-485/RS-422 use the DB9 male connect with 6 terminal board, Or you can choose the RJ-45 port connect with the device which has the RJ-45 connector . Since the RS-485 support two wire half duplex, which means the RS-485 only have two lines to receive data and send data. Handshaking signal usually control the direction of data sending, the inner circuit of HXSP-2108B converter is able to auto sensing the direction of data flow, and switch to ENABLE CONTROLS automatic. A RS-485 network can be built convenient without any handshaking signal; the RS-485 ENABLE CONTROLS is full transparent, no need to modify any software for the old working method based on RS-232. HXSP-2108B converter comes with external power supply, the characteristic have small in design, long transmission distance, performance stable, etc. it is mainly used for the field of electricity, industrial automatic control, IC card billing system and time attendance, one card solution, access control system, parking system, and so on.

Specification & Features:

Standard: Accord EIA RS-232, RS-485, RS-422 standard.
Connector: DB9 female on RS-232 side, DB9 male with 6 terminal block on RS-485/RS-422 side or RJ-45 connector.
Work methods: asynchronous, point to point or multi-point, 2 wire half-duplex.
Transmission medium: twisted pair cable or shielded Wire
Baud rate: 300~115000bps.
Signal indication: three signal indication LEDs(TXD,RXD,POWER).
Surge Protection: 1500W.
Transmission distance: 5 meters (RS-232 side) and 1800 meters (RS-485/RS-422 side).
Dimension: 93mm x 23mm x 62mm.
Environment: -10 to 85 centigrade working temperature, 5% to 95% relative humidity.
Loading Capacity: 32~128 units device.

SOA-HXSP-2108C 53,80 �

Tue, 21 Jun 2016 12:14:02 +0200

HXSP-2108C Industrial Level RS-232 to RS-485/RS-422 Converter

Model: HXSP-2108C

Name: Industrial Level RS-232 to RS-485/RS-422 Converter

Description :

HXSP-2108C is an industrial-grade optical isolation multifunctional converter with external power supply, it compatible with RS-232/RS-485/RS-422 standard. It can change the single-ended RS-232 signal to balanced RS-485/RS-422 signal, The internal optoelectronic isolator and DC Voltage stabilizer can effective lightning suppression , and the ESD offer 600W Surge Protection for each line, it can avoid the lightning strike and prevent interference effectively. RS-232 interface use the DB9 female connector connect with the serial of computer ,on the other side RS-485/RS-422 use the DB9 male connect with 6 terminal board. Since the RS-485 support two wire half duplex, which means the RS-485 only have two lines to receive data and send data. Handshaking signal(RTS Request To Send) usually control the direction of data sending, the inner circuit of HXSP-2108C converter is able to auto sensing the direction of data flow, and switch to ENABLE CONTROLS automatic. A RS-485 network can be built convenient without any handshaking signal; the RS-485 ENABLE CONTROLS is full transparent, no need to modify any software for the old working method based on RS-232. HXSP-2108C converter comes with external power supply, the characteristic have small in design, long transmission distance, performance stable, etc. it is mainly used for the field of electricity, industrial automatic control, IC card billing system and time attendance, one card solution, access control system, parking system, and so on.

Specification & Features:

Standard: Accord EIA RS-232, RS-485, RS-422 standard.
Connector: DB9 female on RS-232 side, DB9 male with 6 terminal block on RS-485/RS-422 side.
Work methods: asynchronous, point to point or multi-point, 2 wire half-duplex.
Transmission medium: twisted pair cable or shielded Wire
Baud rate: 300~115000bps.
Signal indication: three signal indication LEDs(TXD,RXD,POWER).
Surge Protection: 600W.
ESD Protection: 15 KV.
Isolation Voltage: 3.5KV Instantaneous, 500V DC continuous
Transmission distance: 0~5KM.
Dimension: 90mm x 65mm x 25.5mm.

SOA-HXSP-422A 17,60 �

Sat, 29 Jun 2013 19:18:25 +0200

HXSP-422A RS-232 To RS-422 Converter

Model: HXSP-422A

Name: RS-232 To RS-422 Converter

Description :

HXSP-422 series converter is bi-directional connector converter between RS-232 and RS-422; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.
HXSP-422 series converters change the TXD and RXD signals of RS-232 serial port to 4 wire full duplex RS-422 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-422. The automatically process control make you need not reset and make a easy application of the hardware and software installation.

Specification & Features:

Standard: Accord EIA RS-232, RS-422 standard.
Connector: DB9 female on RS-232 side, DB9 male with 6 terminal block on RS-422 side.
Work methods: asynchronous, point to point or multi-point, 4 wire full-duplex.
Transmission medium: Ordinary Line , twisted pair cable or Shielded Wire
Baud rate: 300~115000bps.
Transmission distance: 5 meters (RS-232 side) and 1200 meters (RS-422 side).
Communication protocol: Transparent.
Environment: -10 to 85 centigrade working temperature, 5% to 95% relative humidity.
Signals: RS-232(TXD, RXD,GND); RS-422(TX+,TX-,RX+,RX-,GND).

SOA-HXSP-485A 16,50 �

Fri, 02 Jan 2015 17:00:09 +0100

HXSP-485A RS-232 To RS-485 Converter

Model: HXSP-485A

Name: RS-232 To RS-485 Converter

Description :

HXSP-485 series converter is bi-directional connector converter between RS-232 and RS-485; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.
HXSP-485 series converters change the TXD and RXD signals of RS-232 serial port to 2 wire half duplex RS-485 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-485. The automatically process control make you need not reset and make a easy application of the hardware and software installation.

Specification & Features:

Standard: Accord EIA RS-232, RS-485 standard.
Connector: DB9 female on RS-232 side, DB9 male with 4 or 6 terminal block on RS-485 side.
Work methods: asynchronous, point to point or multi-point, 2 wire half-duplex.
Transmission medium: Ordinary Line , twisted pair cable or Shielded Wire
Baud rate: 300~115000bps.
Transmission distance: 5 meters (RS-232 side) and 1200 meters (RS-485 side).
Communication protocol: Transparent.
Environment: -10 to 85 centigrade working temperature, 5% to 95% relative humidity.
Signals: RS-232 TXD, RXD,GND ; RS-485 Date+, Date-,GND .

SOA-HXSP-485B 11,80 �

Tue, 13 Apr 2021 11:06:44 +0200

HXSP-485B RS-232 To RS-485 Converter

Model: HXSP-485B

Name: RS-232 To RS-485 Converter

Description :

Specification & Features:

SOA-HXSP-485C 23,00 �

Sat, 29 Jun 2013 19:13:40 +0200

HXSP-485C RS-232 To RS-485 Converter

Model: HXSP-485C

Name: RS-232 To RS-485 Converter

Description :

Specification & Features:

SOA-HXSP-TTL-R1 25,60 �

Fri, 06 Nov 2015 16:27:04 +0100

HXSP-TTL-R1 RS232 to TTL Converter

Model: HXSP-TTL-R1

Name: RS232 to TTL Converter

Description

The HXSP-TTL-R1 Plug-n-play RS232 to TTL converter supporting bi-directional communication and east to connect DB9 connectors.
This HXSP-TTL-R1 RS232 to TTL converter provides 5.0V UART levels and converts any standard RS232 port to TTL signals, supporting TX, RX and GND. It is port powered by the RS232 port so no additional power supply is needed.
Also supported is auto flow control, so no external flow control hardware or software drivers are needed. Build-in data flow control automatically enables the interface when data is present on the RS232 side of the converter.
The RS232 side of the converter is a female DB9 connector and the TTL side is a male DB9 connector with an optional screw terminal block for easy connection of both wires and DB9 connetors.

Specification & Feature

UART Signals TXD, RXD,GND
Power level 5.0V
TTL connector DB9 Male + terminal header
RS232 connector DB9 Female
Baud rate 2400 - 115200bps
Processor chip HEF4093BT
Dimensions: 42mm x 31mm x 12mm