SWD.de/+ Manufacturer +/Soarland+HEXIN Technology, Ltd./SOA-SOA-CF / CFast Card Adapter products

SOA-SLCI4001 5,90 �

Sat, 08 Jun 2013 16:27:19 +0200

Model :	SLCI4001	Name:	Universal 40-pin Male IDE To CF Card Adapter
Description :
The IDE to CF adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4001 Universal 40-pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer . It works with an 40-Pin ATA cable and floppy driver power supply .
Specification & Features:
40-Pin standard male IDE connector. 50-Pin standard compact flash socket. +5 V floppy disk drive power connector. Two mounting holes. Master or slave mode selection. Each jumper has a cap , cap on Pin 1-2 is master , cap on Pin 2-3 or no cap is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 61mm * 44mm .

Product Dimension & Drawing :

SOA-SLCI4002 5,90 �

Sat, 08 Jun 2013 11:41:36 +0200

CF / CFast

Model :	SLCI4002	Name:	Universal 40-Pin Female IDE To CF Card Adapter
Description :
The IDE to CF adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4002 Universal 40-Pin Female IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer . It can plug into mainboard directly.
Specification & Features:
40-Pin standard Female IDE connector. 50-Pin standard compact flash socket. +5 V floppy disk drive power connector. Two mounting holes. Plug into mainboard directly. Master or slave mode selection. Each jumper has a cap , cap on Pin 1-2 is master , cap on Pin 2-3 or no cap is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 61mm * 44mm .

Product Dimension & Drawing :

SOA-SLCI4003 5,90 �

Sat, 08 Jun 2013 11:46:04 +0200

CF / CFast

Model :	SLCI4003	Name:	3-LEDs 40-Pin Female IDE To CF Card Adapter
Description :
The 3-LEDs 40-Pin Female IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The 3-LEDs 40-Pin Female IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer . The 3-LEDs 40-Pin Female IDE To CF Card Adapter can plug into mainboard directly. It has 3 LEDs , green LED indicates card detect , yellow LED indicates active , red LED indicates power .
Specification & Features:
40-Pin standard Female IDE connector. 50-Pin standard compact flash socket. +5 V floppy disk drive power connector. 3 LEDs , green LED indicates card detect , yellow LED indicates active , red LED indicates power . Master or slave mode selection. Each jumper has a cap ,jumper1 : Mode select , cap on Pin 1-2 is master , cap on Pin 2-3 or no cap is slave. jumper2 : Supply Voltage, cap on Pin 1-2 is +5V , cap on Pin 2-3 is +3.3V . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 61mm * 46mm * 9.82mm.

Product Dimension & Drawing :

SOA-SLCI4006 8,70 �

Sat, 08 Jun 2013 11:50:38 +0200

CF / CFast

Model :	SLCI4006	Name:	Bracket 40-Pin Male IDE To CF Card Adapter
Description :
The SLCI4006 Bracket 40-Pin Male IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4006 Bracket 40-Pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer . The SLCI4006 Bracket 40-Pin Male IDE To CF Card Adapter works with an 40-Pin ATA cable and floppy driver power supply , it also can fix on PCI bracket for external application .
Specification & Features:
40-Pin standard Male IDE connector. 50-Pin standard compact flash socket. +5 V floppy disk drive power connector. PCI rear bracket for external application . Left-side LED indicators for power-on . Master or slave mode selection. Each jumper has a cap , Mode select , cap on is master , cap off is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Max size: 120.2mm * 40mm * 21.5mm (bracket height).

Product Dimension & Drawing :

SOA-SLCI4021 6,60 �

Sat, 08 Jun 2013 11:54:06 +0200

CF / CFast

Model :	SLCI4021	Name:	Dual CF Card 40-pin Male IDE Adapter
Description :
The SLCI4021 Dual CF Card 40-pin Male IDE Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4021 Dual CF Card 40-pin Male IDE Adapter can used for computer peripheral device factory , industial computer , personal computer . SLCI4021 Dual CF Card 40-pin Male IDE Adapter works with an 40-Pin ATA cable, floppy driver power supply and support dual slot compact flash cf card .
Specification & Features:
40-Pin standard male IDE connector. 50-Pin standard compact flash socket. Dual compact flash slot . +5 V floppy disk drive power connector. Two mounting holes. Master or slave mode selection. Each jumper has a cap , cap on Pin 1-2 is master , cap on Pin 2-3 or no cap is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 61mm * 44mm .

Product Dimension & Drawing :

SOA-SLCI4022 6,60 �

Sat, 08 Jun 2013 11:58:22 +0200

CF / CFast

Model :	SLCI4022	Name:	3-LEDs Dual CF Card 40-pin Female IDE Adapter
Description :
The SLCI4022 3-LEDs Dual CF Card 40-pin Female IDE Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4022 3-LEDs Dual CF Card 40-pin Female IDE Adapter can used for computer peripheral device factory , industial computer , personal computer . SLCI4022 3-LEDs Dual CF Card 40-pin Female IDE Adapter can plug into mainboard directly. It has 3 LEDs , green LED indicates card detect , yellow LED indicates active , red LED indicates power ,it also support dual slot compact flash cf card .
Specification & Features:
40-Pin standard Female IDE connector. 50-Pin standard compact flash socket. Dual compact flash slot . +5 V floppy disk drive power connector. 3 LEDs , green LED indicates card detect , yellow LED indicates active , red LED indicates power . Master or slave mode selection. Each jumper has a cap ,jumper1 : Mode select , cap on Pin 1-2 is master , cap on Pin 2-3 or no cap is slave. jumper2 : Supply Voltage, cap on Pin 1-2 is +5V , cap on Pin 2-3 is +3.3V . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 61mm * 46mm * 12.4mm.

Product Dimension & Drawing :

SOA-SLCI4401 6,60 �

Sat, 08 Jun 2013 12:02:01 +0200

CF / CFast

Model :	SLCI4401	Name:	Pin-cover Laptop 44-Pin Male IDE To CF Card Adapter
Description :
The SLCI4401 Pin-cover Laptop 44-Pin Male IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4401 Pin-cover Laptop 44-Pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The SLCI4401 Pin-cover Laptop 44-Pin Male IDE To CF Card Adapter works with an 44-Pin IDE cable and power supply from IDE.
Specification & Features:
44-Pin standard male IDE connector. 50-Pin standard compact flash socket. Power supply from IDE Master or slave mode selection. Each jumper has a cap , Mode select , cap on is master , cap off is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Max size: 52.2mm * 44.8mm (with pin length).

Product Dimension & Drawing :

SOA-SLCI4402 6,60 �

Sat, 08 Jun 2013 16:04:29 +0200

CF / CFast

Model :	SLCI4402	Name:	Pin-bare Laptop 44-Pin Male IDE To CF Card Adapter
Description :
The SLCI4402 Pin-bare Laptop 44-Pin Male IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4402 Pin-bare Laptop 44-Pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The SLCI4402 Pin-bare Laptop 44-Pin Male IDE To CF Card Adapter works with an 44-Pin IDE cable and power supply from IDE.
Specification & Features:
44-Pin standard male IDE connector. 50-Pin standard compact flash socket. Power supply from IDE. Master or slave mode selection. Each jumper has a cap , Mode select , cap on is master , cap off is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Max size: 52.2mm * 44.8mm (with pin length).

Product Dimension & Drawing :

SOA-SLCI4403 6,60 �

Sat, 08 Jun 2013 16:09:21 +0200

CF / CFast

Model :	SLCI4403	Name:	Flat Laptop 44-Pin Female IDE To CF Card Adapter
Description :
The SLCI4403 Flat Laptop 44-Pin Female IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4403 Flat Laptop 44-Pin Female IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The SLCI4403 Flat Laptop 44-Pin Female IDE To CF Card Adapter can plug into mainboard directly, and power supply from IDE.
Specification & Features:
44-Pin standard Female IDE connector. 50-Pin standard compact flash socket. Power supply from IDE. Directly plugged into IDE connector on the motherboard without an IDE cable . Master or slave mode selection. Each jumper has a cap , Mode select , cap on is master , cap off is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 52mm * 42mm .

SOA-SLCI4404 6,60 �

Sat, 08 Jun 2013 16:12:43 +0200

CF / CFast

Model :	SLCI4404	Name:	Right-angle Laptop 44-Pin Female IDE To CF Card Adapter
Description :
The SLCI4404 Right-angle Laptop 44-Pin Female IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4404 Right-angle Laptop 44-Pin Female IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The SLCI4404 Right-angle Laptop 44-Pin Female IDE To CF Card Adapter can plug into mainboard directly right-angle, and power supply from IDE.
Specification & Features:
44-Pin standard Female IDE connector. 50-Pin standard compact flash socket. Power supply from IDE. Directly plugged into IDE connector right-angle on the motherboard without an IDE cable . Master or slave mode selection. Each jumper has a cap , Mode select , cap on is master , cap off is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 52mm * 37mm .

SOA-SLCI4406 8,40 �

Sat, 08 Jun 2013 09:21:59 +0200

CF / CFast

Model :	SLCI4406	Name:	Big PCB Laptop 44-Pin Male IDE To CF Card Adapter
Description :
The SLCI4406 Big PCB Laptop 44-Pin Male IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The SLCI4406 Big PCB Laptop 44-Pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The SLCI4406 Big PCB Laptop 44-Pin Female IDE To CF Card Adapter works with an 44-Pin IDE cable and power supply from IDE , replacement of 2.5 inch IDE Hard disk driver.
Specification & Features:
44-Pin standard male IDE connector. 50-Pin standard compact flash socket. Power supply from IDE. Replacement of 2.5 inch IDE Hard disk driver. Directly plugged into IDE connector right-angle on the motherboard without an IDE cable . Master or slave mode selection. Each jumper has a cap , Mode select , cap on is master , cap off is slave . Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 69mm * 103mm (with 7mm pin).

SOA-SLCI4407 10,10 �

Sat, 08 Jun 2013 09:27:56 +0200

CF / CFast

Model :	SLCI4407	Name:	Four Mounting Holes 44-Pin Male IDE To CF Card Adapter
Description :
The Four Mounting Holes 44-Pin Male IDE To CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The Four Mounting Holes 44-Pin Male IDE To CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The Four Mounting Holes 44-Pin Male IDE To CF Card Adapter works with an 44-Pin IDE cable and power supply from IDE , replacement of 2.5 inch IDE Hard disk driver.
Specification & Features:
44-Pin standard male IDE connector. 50-Pin standard compact flash socket. Four mounting holes. Power supply from IDE. Replacement of 2.5 inch IDE Hard disk driver. Directly plugged into IDE connector right-angle on the motherboard without an IDE cable . Master or slave mode selection. Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 70mm x 94mm (with 7mm pin length). Weight: 24g.

SOA-SLCI4408 13,90 �

Sat, 08 Jun 2013 09:32:55 +0200

CF / CFast

Model :	SLCI4408	Name:	2.5 Inch HDD Mounting Holes 44-Pin Male IDE To Dual CF Card Adapter
Description :
The 2.5 Inch HDD Mounting Holes 44-Pin Male IDE To Dual CF Card Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk. As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently. The 2.5 Inch HDD Mounting Holes 44-Pin Male IDE To Dual CF Card Adapter can used for computer peripheral device factory , industial computer , personal computer ,laptop computer. The 2.5 Inch HDD Mounting Holes 44-Pin Male IDE To Dual CF Card Adapter works with an 44-Pin IDE cable and power supply from IDE, replacement of 2.5 inch IDE Hard disk driver.
Specification & Features:
44-Pin standard male IDE connector Dual 50-Pin standard compact flash socket Mounting holes Power supply from IDE Replacement of 2.5 inch IDE Hard disk driver Master or slave mode selection Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux

SOA-SLCI5001 8,40 �

Sat, 08 Jun 2013 09:41:44 +0200

CF / CFast

Model :	SLCI5001	Name:	Toshiba IPod 1.8 Inch HDD To CF Card Adapter
Description :
The SLCI5001 Toshiba IPod 1.8 Inch HDD To CF Card Adapter allows convert your toshiba , ipod 1.8 inch hard disk driver to compact flash cf card. You can install the CF card into your ipod by using this adapter in a easy way .
Specification & Features:
Power supply from 1.8 inch interface. Master or slave mode selection. Each jumper has a cap , Mode select , cap on is master , cap off is slave . Support IPod , please notice the IPod Video and IPod Classic using ZIP hard disk driver, it doesnot support this adapter. Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 51mm * 47mm .

Product Dimension & Drawing :

SOA-SLCI6001 11,80 �

Wed, 12 Jun 2013 19:49:17 +0200

CF / CFast

Model :	SLCI6001	Name:	CF To IDE 2.5 Inch/Hitachi 1.8 Inch Multifunctional Adapter
Description :
The CF To IDE 2.5 Inch/Hitachi 1.8 Inch Multifunctional Adapter is transparent to the operating system and does not require any drivers. With this adapter, the host PC will identify the inserted CF card as a standard IDE hard disk.As such, you can install any operating systems and the CF card will be bootable , CF card offer the benefit of low power consumption, no acoustic noise, cost efficient and fast read access time , avoid damaging mechanical HDD cause of by turnning on/off power freqently.It enable cf storage card to use true IDE mode , replace HITACHI 1.8 inch or 2.5 inch ide IDE hard disk driver .The board size is the same as Hitachi 1.8 inch hard disk , perfect for mounting and mounting .The board, 1.8 HDD holes for the screws and a regular 2.5 inch HDD for the mounting hole, so as, 2.5 inch HDD mounting space can also be mounted.
Specification & Features:
44-Pin standard male IDE connector. 50-Pin standard compact flash socket. Power supply from IDE. Jumper for Hitachi 1.8 inch/IDE 2.5 inch . Master or slave mode selection,each jumper has a cap , cap on is master , cap off is slave. Plugs directly into IDE port for HITACHI 1.8 inch HDD. Also compatible with IDE port for 2.5" harddisk drive. Activity indicator LED. Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Size: 70.8mm x 60.5mm x 6.5mm. Weight: 17g.

SOA-SLMA1001 11,30 �

Sat, 08 Jun 2013 09:49:43 +0200

Mini-PCI Mini-PCIe

Model :	SLMA1001	Name:	CF Card to MiniPCI-E Adapter
Description :
The CF Card to MiniPCI-E Adapter is transparent to the operating system and does not require any drivers. With this adapter, the computer will identify the CF card as laptop hard disk. As such, you can install any operating systems and CF card will be bootable.
Specification & Features:
No driver is needed Compatible with ASUS EEEPC 901 and 900A 50-Pin standard compact flash socket. Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux . Dimensions: 70mm x 32mm Weight: 7g

SOA-SLSA1001 23,40 �

Sat, 08 Jun 2013 10:17:54 +0200

CF / CFast

Model :	SLSA1001	Name:	SATA to CF adapter
Description :
SATA-CF Adapter is designed to enable Compact Flash (CFI/II) media to be used as a direct replacement for a 2.5 inch SATA hard drive. As a result, any equipment, such as Notebook computer, that uses a 2.5 inch SATA hard drive can be easily converted to use the low power and shock resistant CF media. Once installed, the CF appears as an ordinary hard drive to any OS and can be configured as a boot device. 2.5 INCH CASE: http://www.soarland.com/2.5_INCH_HDD_Frame-product-370.html
Specification & Features:
Enable Compact Flash (CF) to be used like ordinary 2.5 inch SATA hard drive . Compatible with CFI/II . SATA interface . Mounts directly onto notebook 2.5 inch SATA connector . CF Card can be the primary bootable device containing the OS and applications. Transparent to the operating system and does not require any drivers . Supports DMA and Ultra DMA modes (only on flash media card with such features). Compatible with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux . Size:73mm51mm6mm

Product Dimension & Drawing :

SOA-SLSA1002 25,30 �

Wed, 15 Jul 2015 17:26:14 +0200

CF / CFast

Modell:

SLSA1002

Name:

Bracket SATA zu CF-Karten-Adapter

Beschreibung

Das Bracket SATA zu CF Card Adapter ist so konzipiert, dass Compact Flash (CFI / II) Medien als direkter Ersatz für einen 2.5/3.5 Zoll SATA-Festplatte verwendet werden. Dadurch können alle Geräte, wie z. B. Desktop-Computer, die eine 2,5-Zoll-SATA-Festplatte verwendet leicht umgewandelt werden, um die Low-Power-und stoßfest CF Medien nutzen.Einmal installiert, wird die CF als eine gewöhnliche Festplatte auf jedem Betriebssystem und kann als Boot-Gerät konfiguriert werden.

Specification & Eigenschaft

Kompatibel mit CFI / II.
SATA-Schnittstelle.
CF-Karte kann die primäre Boot-Gerät mit dem OS und Anwendungen.
Transparent, um das Betriebssystem und benötigt keine Treiber.
Unterstützt DMA und Ultra DMA-Modi (nur auf Flash-Speicherkarte mit solchen Features).
Kompatibel mit DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux.