SWD.de/+ Manufacturer +/Trycom Technology Co., Ltd./TRY-Serial Device Server products

TRY-DIN-RAIL-R 6,00 �

Thu, 29 Oct 2020 09:27:04 +0100

DIN-RAIL-R

Din-Rail Mounting Adaptor
•Support TRP-Series full range of modules.
•Simple and easy assembly and remove it.
•ABS fireproof material.

TRY-TRP-C34M 322,00 �

Fri, 03 Apr 2020 11:57:12 +0200

TRP-C34M 4-Port Modbus TCP to RTU/ASCII 3KV Isolated Gateway with Watchdog





Introduction
TRP-C34M is a 4-Port Modbus gateway. There are two functions below: Modbus RTU/ASCII serial master to Modbus TCP slave bi-diction. Modbus TCP master to Modbus RTU/ASCII slave bi-direction. The TRP-C34M is able to run under industrial environment stable, it provides 3KV optical isolated protection between Ethernet interface and 4-port serial interface. The TRP-C34M provides a watchdog timer function that allows the system to automatically recover from a system crash. When the TRP-C34M microprocessor stop working correctly, the watchdog timer waits for a preset period of time and performs a hardware reset.		?
Features
Wide input range DC power supply. Provide 3KV optical isolation protection. Supports Ethernet Mode like TCP Server, TCP Client, and UDP. Support Auto-MDIX twisted pair crossover detection and auto-correction. Maximum allowed bandwidth is 460 Kbps per Serial Port. Supports PPPoE , DDNS , NTP , FTP , Telnet. Runs in Stand Alone Mode. Built in Restore Factory default push button. Auto direction RS485 flow control by hardware. Power/Link and 4 pairs serial RX/TX mode LED indicator. Support screw terminal and standard external DC power adaptor. Panel mounts and Din-Rail Support.
Specifications
CPU:32 bit 580MHZ with MMU. Power Input Voltage: DC +9V to +24V. LAN: Auto-MDIX, 10/100 Mbps Auto-detecting. RS-232: TX, RX, GND. RS-422: TX+, TX-, RX+, RX-. RS-485: Data +, Data –. Data Rate: 75~230.4Kbps. Parity: none, even, odd. Data Bits: 5, 6, 7 or 8. Stop Bits: 1, 2. Configuration through Windows Admin Utility / Web Console / Telnet Console. Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet. Power supply: Screw terminal, or standard external DC adapter. Serial interface: +/-15 KV ESD. RS422/485 interface: Surge, over current, over voltage protection. Serial terminal and Ethernet with 3KV Optical Isolation. Power consumption: 12V/400 mA . Operating Temperature: -20 °C to 65 °C. Humidity: 0~90% Non-Condensing. Dimensions: 224(L)107(W)33(H) /mm. Weight: 400g (W/Packing).
Accessories
PWR-AD12V-Auto (Option)	Switching Adaptor Input:100~240VAC 50/60Hz 260mA Output: DC 12V/1A Certificate: CE, FCC, UL, PSE US Specification We also provide the EU / AUS / British specifications(MOQ:50PCS/2 Weeks)

T-snap (Option)	DIN rail mounting adapter

TRY-TRP-C34R 256,20 �

Thu, 29 Oct 2020 09:27:04 +0100

TRP-C34R 4-Port RS232/422/485 Serial Server with 3KV Optical Isolation



	?

Introduction
? TRP-C34R 4 RS232/422/485 Serial Server provides a transparent way of connecting Serial devices over Ethernet. It can transmit data between the Serial and Ethernet interfaces bi-directionally. To establish automatic or remote data acquisition. By specifying the IP address and the TCP Port number, a host computer can access different Serial Devices such as Serial Modems, Serial Thermometers, Magnetic Card Readers, Barcode Scanners, Data Acquisition Systems, POS Terminals, Industrial PCs etc., over the Network, you can centralize Serial Device management and distribute the management to different hosts at the same time. TRP-C34R Serial Server makes possible to access distant Serial Devices over Network as if they were directly connected to the Standard COM Port of a Personal Computer. TRP-C34R Serial Server supports different modes of operation allowing user to operate the system in different environments. Virtual COM Mode. TRP-C34R Serial Server comes equipped with COM drivers that work with Operating Systems WIN 32bit XP /Vista/2003Server/2008 Server (32-bit & 64-bit), 2000 Server OS, Win 7 (32-bit & 64-bit), WIN 8(32/64 bit),The driver establishes a transparent connection between host and serial device by mapping the IP: Port Number of the TRP-C34R’s Serial Port to a local COM Port on the host computer. The important point is that Real COM Mode allows users to continue using RS-232/422/485 serial communications software like HyperTerminal and similar applications. TCP Server Mode. In TCP Server mode, TRP-C34R Serial Server provides a unique IP: Port address on a TCP/IP network. TRP-C34R Serial Server waits passively to be contacted by the host computer, allowing the host computer to establish a connection with and get data from the serial device. This operating mode supports up to 4 simultaneous connections, so that multiple hosts can collect data from the same serial device—at the same time. TCP Client Mode. In TCP Client mode, TRP-C34R Serial Server can actively establish a TCP connection to a pre-defined host computer when serial data arrives. After the data has been transferred, TRP-C34R Serial Server can automatically disconnect from the host computer by using the TCP alive check time or Inactivity time settings. This Operating Mode supports establishing the TCP connection up to 4 Destination Hosts. UDP Mode. Compared to TCP communication, UDP is faster and more efficient. In UDP mode, you can multicast data from the serial device to multiple host computers, and the serial device can also receive data from multiple host computers, making this mode ideal for message display applications. TRP-C34R hardware support wide range power input , the 4 RS422/485 interface with surge, over current ,over voltage protection, the RS485 interface built-in hardware decoder ensure RS485 data without lost, Specify hardware can ensure on line RS485 device working fine. The TRP-C34R has four synchronous D SUB 9 pin serial port for RS232 connection and 4 screw terminal block for RS422/485 and power connection. The Ethernet port support Auto-MDIX and Auto-select 10/100MB. When TRP-C34R working at unstable voltage industrial environment, the hardware circuit detection can prevent the power fail cause of the boot fail and Re-Boot. ?			?
Features
? Wide input range DC power supply. Supports Socket operation modes like TCP Server, TCP Client, and UDP using TCP/IP and UDP protocols. Support Auto-MDIX twisted pair crossover detection and auto-correction. Each Port maximum connection 4 host PC at TCP Server and TCP Client Mode. Maximum allowed bandwidth is 230.4 Kbps per Serial Port. Supports Web Console, Telnet Console. Runs in Stand Alone Mode. Built in Restore Factory default push button. Features Accessible Imps List to add or remove “legal” remote host IP Addresses to prevent unauthorized access to Serial Server. Features Auto IP Address Report to periodically report the IP Address of Serial Server to the assigned Host on Network. Auto direction RS485 flow control by hardware. Surge protection and over current and over voltage on RS-422/485 data lines. Virtual COM drivers for WIN 32bit XP /Vista/2003Server/2008 Server (32-bit & 64-bit), 2000 Server OS, Win 7 (32-bit & 64-bit) ,Win 8/8.1 (32-bit & 64-bit). Fully compatible with Ethernet and TCP/IP protocol. Supports 10/100 Mbps Ethernet. Power/Link and 4 pair Serial RX/TX mode LED indicator. Support screw terminal and standard external DC power adaptor. Panel mounts and Din-Rail support. ?
Specifications
? CPU:32 bit 580MHZ with MMU. Power Input Voltage: DC +9V to +24V. LAN: Auto-MDIX, 10/100 Mbps Auto-detecting. RS-232: TX, RX, GND. RS-422: TX+, TX-, RX+, RX-. RS-485: Data +, Data –. Data Rate: 75~230.4Kbps. Parity: none, even, odd. Data Bits: 5, 6, 7 or 8. Stop Bits: 1, 2. Configuration through Windows Admin Utility / Web Console / Telnet Console. Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet. Power supply: Screw terminal, or standard external DC adapter. Serial interface: +/-15 KV ESD. RS422/485 interface: Surge, over current, over voltage protection. Serial terminal and Ethernet with 3KV Optical Isolation. Power consumption: 12V/400 mA . Operating Temperature: -20 °C to 65 °C. Humidity: 0~90% Non-Condensing. Dimensions: 224(L)107(W)33(H) /mm. Weight: 400g (W/Packing). ?
Accessories
PWR-AD12V-Auto (Option)		Switching Adaptor Input:100~240VAC 50/60Hz 260mA Output: DC 12V/1A Certificate: CE, FCC, UL, PSE US Specification We also provide the EU / AUS / British specifications(MOQ:50PCS/2 Weeks)

TRY-TRP-C36 135,80 �

Fri, 13 Dec 2019 11:16:19 +0100

TRP-C36 Ethernet to RS-232/422/485 Isolated Converter

Introduction

TRP-C36, a high speed, single-port serial device, is designed to instantly convert data from

RS-232/422/485 interfaces to an Ethernet network running at the TCP/IP, UDP protocol.

By using a standard COM port and existing network infrastructure the device allow you to link

together a distant RS-232/422/485 serial device. You can reach TRP-C36 from Windows and

Linux without the need to modify existing software.

TRP-C36 supports 10/100Mbps auto-detecting, and auto RS-485 data direction flow control,

it also provides with 3000V DC isolation and internal surge protection to protect the converter

against high input voltage spikes and ground potential differences,

and ensure a save data transmission on network.

The industry standard DIN rail and panel mounting design enable user a fast and

professional installation.

Features

Wide input range DC power supply.

Fully compatible with Ethernet TCP/IP protocol.

Support 3000V DC isolation protection.

Auto direction flow control on RS-485.

Surge protection on RS-422/485 data lines.

Support baud rate up to 230Kbps.

Power/Link/TX /RX mode LED indicator.

Support intranet and internet system setting function.

Support screw terminal and standard external DC power adaptor.

Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/

WIN2003/WIN 7/WIN8/WIN8.1.

DIN rail and panel mount.

Specifications

Power Input Voltage: DC +10V to +30V

Interface: Standard RJ45 LAN port

LAN: 10/100Base-T, 10/100Mbps auto-detecting.

RS-232: 5 full-duplex (TXD, RXD, CTS, RTS, GND)

RS-422: Differential 4 full-duplex wires ( TX+ , RX+, TX- , RX-).

RS-485: Differential 2 half-duplex wires (D+, D-)

Connection type: Screw terminal, accepts AWG#12~30 wire.

Signal LED: Power, Link, TX, RX

Power supply: Screw terminal, or external DC adapter.

Power consumption: 1.6W

Isolation voltage: 3000V DC

Operating environment: -10 to 50℃

Storage temperature: -20 to 70℃

Humidity: 10~90% Non-condensing

Dimension: 151mm X 75mm X 26mm

Weight: 375g

TRY-TRP-C37 114,80 �

Mon, 09 Aug 2021 15:14:17 +0200

TRP-C37 Ethernet to RS-232/422/485 Converter

Introduction

TRP-C37 is suitable industrial environment Ethernet serial server,

wide range power input and serial communicate protection, Built-in surge, over current,

over voltage ensure long distance serial quality,

the RS485 interface built-in hardware decoder ensure RS485 data without lost and

fast direction switching, Specify hardware can keep on line RS485 device working fine;

Increase external watchdog function will auto reset when Ethernet serial server or power fail,

if careless lost password or IP that can easy to back to factory by external switch.

The TRP-C37 operates in “Direct IP Mode”, “Virtual COM Mode”, and “Paired Mode”.

It has one DB-9 serial port for RS232 connector and screw terminal block for RS422/485 and power .

The TRP-C37 support maximum connection 16 host clients to link the one serial server

that is easy to operate in Modscan32 and Modbus Poll application uses Virtual-COM mode and

Pair Mode. When TRP-C37 working at industrial environment, if the voltage is unstable ,

The TRP-C37 built-in power detection circuit can prevent the power fail cause

of the system boot fail. In network security,

In network security, the TRP-C37 is able to set up 8 sets host IP,

only these host IP can access the TRP-C37.

Features

Wide input range DC power supply.

Power Input detection circuit.

External watchdog function prevents system or power fail.

Support Auto-MDIX twisted pair crossover detection and Auto-Correction.

Maximum Connection 16 Client PC at Server Mode.

Maximum 8 sets host IP that limits network access.

Surge protection and over current and over voltage on RS-422/485 data lines.

Support baud rate from1200~921600Kbps.

Auto switching RS-232/422/485 signal interface.

Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/

WIN 7/WIN8/WIN8.1.

Virtual Com Support Server, Client, UDP mode.

Fully compatible with Ethernet and TCP/IP protocol.

Supports 10/100 Mbps Ethernet.

Power/Link/RX/TX mode LED indicator.

Heart Beat function ensures a reliable communicating connection.

Auto Pair-mode when power or Ethernet fails.

Back to factory by external switch.

Support configuration by serial console.

Update the firmware from Lan.

Dual power input select from screw terminal or DC-jack.

Specifications

Power Input Voltage: DC +10V to +30V.

LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.

RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND.

RS485 signal: differential 2 half-duplex wires (DATA+, DATA-).

RS422 signal: differential 4 full-duplex wires.(TX+,RX+,TX-,RX-)

Data Rate: 1200,2400,4800,9600,19200,38400,57600,115200,921600 K bps .

Parity: none, even, odd.

Data Bits: 5, 6, 7 or 8.

Stop Bits: 1, 1.5 or 2.

Protocol: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP

External switch 1,2:OFF/OFF :TCP and VSP mode.

ON/ OFF : Option .

OFF/ON :Option.

ON/ON :Back to Factory.

Virtual-Com mode support RS232 TXD,RXD,GND,

RS422 TX+,TX-,RX+,RX-

RS485 DATA+,DATA-.

Power supply: Screw terminal or DC jack .

Serial interface: +/-15 KV ESD.

RS422/485 interface: Surge, over current, over voltage protection.

Power consumption: 12V/140mA.

Operating Temperature:-10 to 65 °C.

Humidity: 0~90% Non-Condensing.

Dimensions: 151(L)*75(W)*26(H) mm.

Weight: 395g with packing.

TRY-TRP-C37M 203,00 �

Mon, 03 May 2021 12:07:13 +0200

TRP-C37M Modbus TCP To RTU/ASCII Gateway with watch dog

Introduction

The TRP-C37M which is able to analyzes the protocols between Modbus TCP and Modbus RTU / ASCII.

It is able to assign the UID of Modbus TCP slave from Modbus Serial Master.

The TRP-C37M which is suitable industrial environment Ethernet serial server,

wide range power input and serial communicate protection, It Built-in surge, over current,

over voltage ensure RS422 / 485 serial communication quality; if user lost password that can

fast back to default by external switch.

The TRP-C37M can as serial server that support 3 operates mode,

"Direct IP Mode", "Virtual COM Mode", and "Paired Mode",

these modes are supported Modbus RTU / ASCII protocols.

The TRP-C37M offers maximum connection 16 host clients to link the one serial server,

it is easy to operate in Modscan32 and Modbus Poll many application uses

Virtual-COM mode and Pair Mode.

The TRP-C37M provides a watchdog timer function,

The Watchdog timer allows the system to automatically recover from a system crash.

When the TRP-C37M MCU stop working correctly, the watchdog timer waits for a preset period of time,

and performs a hardware reset .

When The TRP-C37M working at unstable voltage industrial environment,

the power detection circuit can prevent the power fail cause of the boot fail then auto re-boot.

The TRP-C37M will be auto detects function which will be auto connect when the

LAN disconnect then re-connect or power off then power on.

In network security, the TRP-C37 is able to set up 8 sets host IP,

only these host IP can access the TRP-C37.

Features

Wide input range DC power supply.

Built-In watchdog function prevents system boot fail.

Support Auto-MDIX twisted pair crossover detection and Auto-Correction.

Modbus Type support TCP Master to Serial Slave and TCP Slave to Serial Master.

Support 1 serial master to 8 TCP slave ,each TCP slave can free set up UID from 0~256..

Compatible with Modscan32 ,Modbus Poll,CAS Modbus Scanner and SCADA .. application.

Support virtual com maximum connection 16 client.

Maximum 8 sets host IP that limits network access.

Surge protection and over current and over voltage on RS-422/485 data lines.

Support baud rate from1200~921600Kbps.

Auto switching RS-232/422/485 signal interface.

Fully compatible with Ethernet and TCP/IP protocol.

Supports 10/100 Mbps Ethernet.

Power/Link/UART RX/UART TX mode LED indicator.

Heart Beat function ensures a reliable communicating connection.

Auto reconnection when power or Ethernet fail.

Back to factory configuration by external switch.

Support configuration by serial console.

Update the firmware from LAN.

Dual power input select from screw terminal or DC-Jack.

Specifications

Power Input Voltage: DC +10V to +30V.

LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.

Modbus TCP Type: TCP Master and slave.

Virtual-com driver support Windows 98/2000/2003 and WIN7.

External touch button: Back to factory. .

Power supply: Screw terminal, or DC jack.

Configuration mode: Trycom Device Manager, WEB settings.

Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires.

Power consumption: 12V/140mA.

Operating Temperature: -10 to 65 °C.

Humidity: 0~90% Non-Condensing.

Dimensions: 151(L)*75(W)*26(H) mm.

Weight: 395g with packing.

TRY-TRP-C37MA 203,00 �

Mon, 06 Apr 2020 12:07:48 +0200

TRP-C37MA Modbus TCP to RTU/ASCII Gateway with Remote Monitoring?Introduction

In addition to Modbus TCP to RTU/ASCII function, The TRP-C37MA is able to remote monitoring serial device. There are 2 models to choose from: Automatic monitoring mode: The Serial device must be sends a single pulse to TRP-C37MA continually per 30 seconds. If serial device do not send a single pulse over 30 seconds ,the TRP-C37MA will be actives the relay. Manual mode: If the serial device need to restart, user can feel free to set the relay enable through the TRP-C37MA web configuration.

?Features

Automatic remote monitoring serial device.
Automatic restart the serial device.
Direct active the relay by web page.
Read the counter value and DI status from w web based utility.
Adjustable relay latch time from web based utility.
Wide input range DC power supply.
Power Input detection circuit.
External watchdog function prevents system or power fail.
Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
Maximum Connection 16 Client PC at Server Mode.
Compatible with Modscan32 ,Modbus Poll,CAS Modbus Scanner and SCADA .. application.
Maximum 8 sets host IP that limits network access.
Surge protection and over current and over voltage on RS-422/485 data lines.
Support baud rate from1200~921600Kbps.
Auto switching RS-232/422/485 signal interface.
Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN 8/WIN 8.1 and WIN10.
Virtual Com Support Server, Client, UDP mode.
Virtual Com Support Modscan32 or Modbus Poll utility.
Fully compatible with Ethernet and TCP/IP protocol.
Supports 10/100 Mbps Ethernet.
Power/Link/UART RX/UART TX mode LED indicator.
Heart Beat function ensures a reliable communicating connection.
Auto reconnection when power or Ethernet fail.
Back to factory configuration by external switch.
Update the firmware from LAN.
Dual power input select from screw terminal or DC-Jack.

Specifications

Power Input Voltage: DC +10V to +30V.

LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.

RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND.

RS485 signal: differential 2 half-duplex wires (DATA+, DATA-).

RS422 signal: differential 4 full-duplex wires.(TX+,RX+,TX-,RX-)

Baud Rate: 1200,2400,4800,9600,19200,38400,57600,115200,921600 K bps.

Parity: none, even, odd.

Data Bits: 5, 6, 7 or 8.

Stop Bits: 1, 1.5 or 2.

Protocol: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP.

Modbus TCP Type: TCP Master to Serial Slave, TCP Slave to Serial Master.

TCP Slave to Serial Master Mode: Maximum 8 TCP Port. UID Range:00~FF.

External switch: OFF OFF : Directly IP mode, RTU protocol.

ON OFF: Virtual-Com and Paired mode .

OFF ON: Directly IP mode, ASCII protocol

ON ON: Back to Factory.

Virtual-Com mode support RS232 TXD,RXD,GND.

RS422 TX+,TX-,RX+,RX-.

RS485 D+,D-.

Heartbeat function: TCP 5300 port send a strings per 5 seconds.

Maximum TCP connections at the same time: 16.

Digital I / O connector: D-type 9PIN female.

Digital input an effective voltage: DC +/- 4 ~ 30V.

Digital Input count : 0~65535.

Relay setting start to closing time: 1 ~ 255 (ms / unit).

Relay specifications: two independent NC, COM, NO.

Relay contact capacity: AC 125V / 0.5A, DC 30V / 2A, DC110V / 0.3A.

Power supply: Screw terminal, or DC jack.

Serial interface: +/-15 KV ESD.

RS422/485 interface: Surge, over current, over voltage protection.

RS422/485 interface: Industrial plug-in screw terminal.

Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires.

Power consumption: 12V/140mA.

Operating Temperature: -10 to 65 °C.

Humidity: 0~90% Non-Condensing.

Dimensions: 151(L)*75(W)*26(H) mm.

Weight: 395g with packing.

AccessoriesLI-232-9F9F(Option)1.8M D-SUB 9 pin female to female Null-Modem cablePWR-AD12V-Auto (Option)Switching Adaptor

Input:100~240VAC 50/60Hz 260mA

Output: DC 12V/1A

Certificate: CE, FCC, UL, PSE

US Specification

We also provide the EU / AUS / British specifications(MOQ:50PCS/2 Weeks)

T-snap (Option)DIN rail mounting adapter

TRY-TRP-C34X 154,00 �

Sat, 19 May 2018 20:08:24 +0200

TRP-C34X Ethernet to 1 RS-232 and 1 RS422/485 Optical Isolated Converter

Introduction

TRP-C34X RS232/422/485 Serial Server provides a transparent way of

connecting Serial devices over Ethernet. It can transmit data between the

Serial and Ethernet interfaces bi-directionally. To establish automatic or

remote data acquisition, TRP-C34X Serial Server also provides 3KV optical

isolation and surge protection to protect system from ground loops and destructive.

By specifying the IP address and the TCP Port number, a host computer can

access different Serial Devices such as Serial Thermometers,

Magnetic Card Readers, Barcode Scanners, Data Acquisition Systems,

POS Terminals, Industrial PCs etc., over the Network,

you can centralize Serial Device management and distribute the management to

different hosts at the same time. TRP-C34X makes possible to access distant

Serial Devices over Network as if they were directly connected to the Standard

COM Port of a Personal Computer.

TRP-C34X supports different modes of operation allowing user to operate

the system in different environments.

Real COM Mode.

TRP-C34X comes equipped with COM drivers that work with Operating Systems

WINXP /Vista/2003Server/2008 Server (32-bit & 64-bit), 2000 Server OS,

Win 7 (32-bit & 64-bit),WIN8/WIN8.1(32/64bit), The driver establishes a

transparent connection between host and serial device by mapping the IP:

Port Number of the TRP-C34X’s Serial Port to a local COM Port on the

host computer.

The important point is that Real COM Mode allows users to continue using

RS-232/422/485 serial communications software like HyperTerminal and similar applications.

TCP Server Mode.

In TCP Server mode, TRP-C34X provides a unique IP: Port address on a TCP/IP network.

TRP-C34X waits passively to be contacted by the host computer,

allowing the host computer to establish a connection with and get data from the serial device.

This operating mode supports up to 4 simultaneous connections,

so that multiple hosts can collect data from the same serial device—at the same time.

TCP Client Mode.

In TCP Client mode, TRP-C34X can actively establish a TCP connection to a

pre-defined host computer when serial data arrives. After the data has been transferred,

TRP-C34X can automatically disconnect from the host computer by using the

TCP alive check time or Inactivity time settings.

This Operating Mode supports establishing the TCP connection up to 4 Destination Hosts.

UDP Mode.

Compared to TCP communication, UDP is faster and more efficient.

In UDP mode, you can multicast data from the serial device to multiple host computers,

and the serial device can also receive data from multiple host computers,

making this mode ideal for message display applications.

When TRP-C34X working at unstable voltage industrial environment,

the hardware circuit detection can prevent the power fail cause of the boot fail and Re-Boot.

Features

Wide input range DC power supply.

RS232/422/485 Built-in 3KV Optical-Isolation.

Surge protection and over current and over voltage on RS-422/485 data lines.

Supports Socket operation modes like TCP Server, TCP Client,

and UDP using TCP/IP and UDP protocols.

Support Auto-MDIX twisted pair crossover detection and auto-correction.

Each Port maximum connection 4 host PC at TCP Server and TCP Client Mode.

Maximum allowed bandwidth is 460 Kbps per Serial Port.

Supports Web Console, Telnet Console.

Runs in Stand Alone Mode.

Built in Restore Factory default push button.

Features Accessible Imps List to add or remove “legal” remote host IP Addresses to

prevent unauthorized access to TRP-C34X.

Features Auto IP Address Report to periodically report the IP Address of TRP-C34X to

the assigned Host on Network.

Auto direction RS485 flow control by hardware.

Virtual COM drivers for WIN XP /Vista/2003Server/2008 Server (32-bit & 64-bit),

2000 Server OS, Win 7 (32-bit & 64-bit),WIN8/8.1(32 bit&64bit).

Fully compatible with Ethernet and TCP/IP protocol.

Power/Link and 2 pair Serial RX/TX mode LED indicator.

Support screw terminal and standard external DC power adaptor.

Din rail or panel mounts support.

Specifications

CPU:32 bit 170MHZ with MMU.

SDRAM:32MB.

FLASH:8MB.

Power Input Voltage: DC +10V to +30V.

LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.

RS-232: TXD, RXD, RTS, CTS, ISO GND.

RS-422: TX+, TX-, RX+, RX-, ISO GND.

RS-485: Data +, Data –, ISO GND.

Data Rate: 75~921Kbps.

Parity: none, even, odd.

Data Bits: 5, 6, 7 or 8.

Stop Bits: 1, 1.5 or 2.

Configuration through Windows Admin Utility / Web Console / Telnet Console.

Supports Real COM mode using RFC 2217 protocol.

Protocol: ICMP, TCP/IP, UDP, DHCP, Boot, Telnet, DNS, SNMP, HTTP, SMTP, SNTP.

Power supply: Screw terminal, or standard external DC adapter.

Serial interface: +/-15 KV ESD.

RS422/485 interface: Surge, over current, over voltage protection.

Power consumption: 12V/230 mA (without external device).

Operating Temperature: 0 to 65 °C.

Humidity: 0~90% Non-Condensing.

Dimensions: 141(L)*78(W)*26.5(H) /mm.

Weight: 450g (W/Packing).

TRY-TRP-C37A 128,80 �

Wed, 16 Sep 2020 15:45:00 +0200

TRP-C37A RS232/422/485 Serial Device Server with Remote Monitoring?Introduction

In addition to serial server function, The TRP-C37A is able to remote monitoring serial device.

There are 2 models to choose from:

Automatic monitoring mode:

The Serial device must be sends a single pulse to TRP-C37A continually per 30 seconds.

If serial device do not send a single pulse over 30 seconds ,the TRP-C37A will be actives the relay.

Manual mode:

If the serial device need to restart, user can feel free to set the relay enable through the TRP-C37 A web configuration.

?Features

Automatic remote monitoring serial device.
Automatic restart the serial device.
Direct active the relay by web based utility.
Read the counter value and DI status from web based utility.
Adjustable relay latch time from web page.
Wide input range DC power supply.
Power Input detection circuit.
External watchdog function prevents system or power fail.
Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
Maximum Connection 16 Client PC at Server Mode.
Maximum 8 sets host IP that limits network access.
Surge protection and over current and over voltage on RS-422/485 data lines.
Support baud rate form1200~921600Kbps.
Auto switching RS-232/422/485 signal interface.
Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN 8/WIN 8.1 and WIN10.
Virtual Com Support Server, Client, UDP mode.
Fully compatible with Ethernet and TCP/IP protocol.
Supports 10/100 Mbps Ethernet.
Power/Link/RX/TX mode LED indicator.
Heart Beat function ensures a reliable communicating connection.
Auto Pair-mode when power or Ethernet fails.
Back to factory by external switch.
Support configuration by serial console.
Update the firmware from LAN.
Dual power input select from screw terminal or DC-jack

Specifications

Power Input Voltage: DC +10V to +30V.
LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND.
RS485 signal: differential 2 half-duplex wires (DATA+, DATA-).
RS422 signal: differential 4 full-duplex wires(TX+,RX+,TX-,RX-).
Data Rate: 1200,2400,4800,9600,19200,38400,57600,115200,921600 K bps .
Parity: none, even, odd.
Data Bits: 5, 6, 7 or 8.
Stop Bits: 1, 1.5 or 2.
Protocol: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP
External switch 1,2:OFF/OFF :TCP and VSP mode.

ON/ OFF : Option .

OFF/ON :Option.

ON/ON :Back to Factory.

Virtual-Com RS232 TXD,RXD,GND.

RS422 TX+,TX-,RX+,RX-.

RS485 DATA+,DATA-.

Heartbeat function: TCP 5300 port send a strings per 5 seconds.
Maximum TCP connections at the same time: 16.
Digital I / O connector: D-type 9PIN female.
Digital input an effective voltage: DC +/- 4 ~ 30V.
Digital Input count : 0~65535.
Relay setting start to closing time: 1 ~ 255 (ms / unit).
Relay specifications: two independent NC, COM, NO.
Relay contact capacity: AC 125V / 0.5A, DC 30V / 2A, DC110V / 0.3A.
Power supply: Screw terminal or DC jack .
Serial interface: +/-15 KV ESD.
RS422/485 interface: Surge, over current, over voltage protection.
Power consumption: 12V/150mA.
Operating Temperature:-10 to 65 °C.
Humidity: 0~90% Non-Condensing.
Dimensions: 151(L)*75(W)*26(H) mm.
Weight: 410g with packing.

AccessoriesLI-232-9F9F(Option)1.8M D-SUB 9 pin female to female Null-Modem cablePWR-AD12V-Auto (Option)Switching Adaptor

Input:100~240VAC 50/60Hz 260mA

Output: DC 12V/1A

Certificate: CE, FCC, UL, PSE

US Specification

We also provide the EU / AUS / British specifications(MOQ:50PCS/2 Weeks)

T-snap (Option)DIN rail mounting adapter