SWD.de/+ Manufacturer +/Trycom Technology Co., Ltd./TRY-USB to serial Converter(Windows 10 support) products

TRY-DIN-RAIL-R 6,00 �

Thu, 29 Oct 2020 09:27:04 +0100

DIN-RAIL-R

Din-Rail Mounting Adaptor
•Support TRP-Series full range of modules.
•Simple and easy assembly and remove it.
•ABS fireproof material.

TRY-TRP-C08 85,40 �

Mon, 20 Dec 2021 08:52:31 +0100

TRP-C08 USB to RS-232/422/485 Isolated Converter (Version:2.1)

Introduction

The TRP-C08 allows you to connect your serial devices to systems by using a USB interface.

With auto configuration in data format, baud rate and RS-485 data flow direction control.

TRP-C08 is able to automatically configure RS-232,

RS-422 or RS-485 signals to baud rate without external switch setting.

TRP-C08 is equipped with 3000V DC of isolation and internal surge-protection on

each data lines to protect the host computer and converter against high voltage spikes,

as well as ground potential difference.

TRP-C08 also features a high-speed 256 Kb/s transmission rate, and supports various O.S.

The industry DIN rail and panel mounting design enable user a fast and professional installation.

Features

Full compliance with the USB V1.0 and 2.0 specification.

System gets 1 COM port when the converter is connected.

Auto data format detecting.

Auto direction flow control on RS-485.

Programmable baud rate from 75 bps to 6 Mbps

RS232/422/485 Support 3KV isolation

256 byte buffer for upstream and downstream data flow.

Direct power from USB port , no external power necessary.

3000V DC isolated protection.

Surge protection on RS422/485 data lines.

Power/TX/RX mode LED indicator.

DIN rail or panel mount support.

Driver support: Android/Windows 8/8.1/ 98/ME/2000/XP/CE3.0,

and Linux, and Mac OS.

Specifications

USB interface: Fully compliant with V1.0, 2.0 specification.

USB to serial bridge controller; Prolific PL2303TA (TRP-C08 Version:2.1).

RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).

RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).

RS-485 signal: Differential 2 half-duplex wires (D+, D-).

Data Format: Asynchronous data with all common combination of bits, parity, stop.

Parity type: None, odd, even mark, space.

Data bit: 5, 6, 7, 8 or 16.

Stop bits: 1, 1.5, 2.

Cable: USB type A to type B.

Communication speed: 75~128KBbps.

RS-422/485 line protection: Against surge, short circuit, and voltage peak.

Transmission distance: RS-422/485 Up to 4000ft (1200M ).

Connection type: Screw terminal accepts AWG #12~30 wires.

Signal LED: Power on, TX, RX.

Direct power from USB port.

Power consumption: 1.2W.

Isolation voltage: 3000V DC.

Operating environment: -10 to 50℃ .

Storage temperature: -20 to 70℃.

Humidity: 10-90% Non-condensing.

Dimension: 151mm X 75mm X 26mm .

Weight: 375g .

TRY-TRP-C08H 147,00 �

Thu, 09 Sep 2021 13:24:26 +0200

TRP-C08H USB 2.0 to 2 ports RS-232 and 2 ports RS-422/485 Isolated Converter

Introduction

The TRP-C08H allows you to simultaneously connect 2 RS-232 and 2 RS-422/485 serial devices

to system by using a USB interface. The RS232 interface support all common PC DTE

connection type. For RS-422/485 data lines TRP-C08H provides auto-detecting function

in data format, baud rate and data direction flow control, it may automatically configure

RS-422/485 signals and baud rate without external switch setting. TRP-C08H is equipped

with 3000V DC of isolation and internal surge protection to protect the host computer and

converter against high voltage spikes, as well as ground potential differences.

TRP-C08H features a high-speed 256KB transmission rate, and supports various O.S.

The industry standard DIN rail design enables users a fast and professional installation.

Features

USB-2.0 device controller.
Allow user custom adjust baud-rates.
Each Port can impendent set up the baud-rate and data format.
On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port.
System gets four serial port when the converter plug in.
Auto switching RS422/485 detecting.
Auto direction flow control on RS485.
Auto baud rate switching from 300bps to 256 Kbps.
Direct power from USB port , no need external power supply.
3000 VDC isolation protection on RS422/485.
Surge protection on RS422/485 data line.
Power and TXA/RXA/TXB/RXB communication LED indicator
Din-Rail (option)or panel mount Driver support:
Driver Support: Android/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0,

and Linux, and Mac OS .

Specifications

Input: USB 2.0 protocol.
RS232 output: Standard 9 pin DTE full-duplex.
RS422 output: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
RS485 output: Differential 2 half-duplex wires (D+, D-).
Data Format: Asynchronous data with all common combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Cable: USB 2.0 type A to type B cable.
Communication speed: form 300bps to 256Kbps.
RS-422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
RS-232 line protection: +/- 15KV ESD.
Distance: RS-422/485 Up to 4000ft (1250M).
Connection type: Screw terminal for maximum AWG #12~30 wire.
DIN rail and panel mount support.
Two power input: USB power or external Power.
Power consumption: 260mA by USB power.
RS422/485 Optical Isolation: 3000V DC.
Operating environment: 0 to 65℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 75mm X 26mm.
Weight: 395g.
Humidity: 10-90% non-condensing. .

TRY-TRP-C08S 105,00 �

Wed, 18 Nov 2020 10:41:24 +0100

TRP-C08S USB 2.0 to 1*RS-232 and 1*RS422/485 Isolated Converter

Introduction

The TRP-C08S is one standard USB 2.0 to Serials Bridge that has one DB-9 RS232

male connectors and 4 PIN screw terminal for RS422/485. The DB-9 pin serial port is

configured as a DTE (data terminal equipment) device which is same as all PC COM ports.

The RS422/485 with auto configuration in data format, baud rate and RS485 data flow

direction control. RS422/485 equips with 3000VDC of isolation and internal surge-protection

on each data line, it gives the host computer and module itself entirely protection from

destructive voltage spikes and danger of unregulated voltages input.

TRP-C08S also features a high-speed 921.6 K bps transmission rate,

and supports various O.S. The industry DIN rail and panel mounting design enable

user a fast and professional installation.

Features

USB-2.0 Device Controller

Allow user custom adjust baud-rates.

Each Port can impendent set up the baud-rate and data format.

OS. system get dual port UART serial (1*RS232 and 1*RS422/485).

On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port.

Fully PLC support such as Mitsubishi Q,FX and FATEK serial....

Auto direction flow control on RS-485.

Auto baud rate switching from 75bps to 921.6 Kbps.

256 byte buffer for upstream and downstream data flow.

Direct power from USB port , no external power necessary.

3000V DC isolated protection.

Surge protection on RS422/485 data lines.

Power and TXA/RXA/TXB/RXB communication LED indicator .

DIN rail or panel mount support.

Driver Support: Android/Win8.1/Vista64/32,

Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0, and Linux, and Mac OS .

Specifications

Input: USB 2.0.
Output: RS232 signal: Standard 9 pin DTE full-duplex.
RS422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
RS485 signal: Differential 2 half-duplex wires (D+, D-).
Optical Isolation:RS422/485 3KV.
Data Format: Asynchronous data with any combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Flow Control: Xon/Xoff, Hardware, None
Cable: USB 2.0 type A to type B cable.
Communication speed:75~256Kbps.
RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
RS232 line protection: +/- 15KV ESD.
Distance: RS422/485 Up to 4000ft (1250M).
Connection type: Screw terminal for maximum AWG #12~30 wire.
Din-Rail mountable: Option.
Power consumption:130mA by USB power.
RS422/485 Optical Isolation: 3000V DC.
Operating environment: -10 to 50℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 111mm X 26mm.
Weight: 375g.
Humidity: 10-90% non-condensing.

TRY-TRP-C08U 135,80 �

Sat, 19 May 2018 18:58:57 +0200

TRP-C08U USB 2.0 to 4 ports RS-232 Isolated Converter

Introduction

The TRP-C08U allows you to simultaneously connect 4 RS-232 serial devices

to system by using a USB interface. Each one can be independent setting different serial

data format and baud-rate.The user may also aim at the special BAUD-RATE demand to

set up by separately.

The RS232 interface offer TXD, RXD, GND signal connection type.

TRP-C08U is equipped with 3000V DC of isolation and +/-15KV ESD,

as well as ground potential differences. TRP-C08U features a high-speed 256KB transmission rate,

and supports various O.S. The industry standard DIN rail design enables users a fast and

professional installation.

Features

USB-2.0 device controller.
Allow user custom adjust baud-rates.
Each Port can impendent set up the baud-rate and data format.
On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port.
System gets four serial port when the converter plug in.
Direct power from USB port , no need external power supply.
3000 VDC isolation protection on RS232.
Power and TXA/RXA/TXB/RXB/TXC/RXC/TXD/RXD communication LED indicator
Din-Rail (option)or panel mount Driver support:
Driver Support: Android/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0,

and Linux, and Mac OS .

Specifications

Input: USB 2.0 protocol.
RS232 output: TXD,RXD.GND.
Data Format: Asynchronous data with all common combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Cable: USB 2.0 type A to type B cable.
Communication speed: form 300bps to 256Kbps.
RS-232 line protection: +/- 15KV ESD.
Connection type: Screw terminal for maximum AWG #12~30 wire.
DIN rail and panel mount support.
Power consumption: 70mA by USB power.
Operating environment: 0 to 65℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 75mm X 26mm.
Weight: 395g.
Humidity: 10-90% non-condensing.

TRY-TRP-C08X 173,60 �

Sat, 19 May 2018 18:59:57 +0200

TRP-C08X USB 2.0 to 4 RS-232/422/485 Converter

Introduction

The TRP-C08X is USB 2.0 to Serials converter that has four DB-9 RS232 male connectors

and Four screw terminal for RS422/485. The DB-9 pin serial port is configured as

a DTE (data terminal equipment) device which is same as all PC COM ports.

The RS422/485 with Auto configuration in data format, baud rate and RS485

data flow direction control. The RS422/485 internal surge-protection on each data line,

it gives the host computer and module itself entirely protection from destructive voltage

spikes and danger of unregulated voltages input. TRP-C08X also features

a high-speed 921.6 K bps transmission rate, and supports various O.S.

The industry DIN rail and panel mounting design enable user a fast and professional installation.

Features

USB-2.0 Device Controller.

Customer-specified Baud rates are also supported.

Each Port cans impendent set up the baud-rate and data format.

On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port.

Fully PLC support such as Mitsubishi Q,FX and FATEK serial....

Auto direction flow control on RS-485.

Auto baud rate switching from 75bps to 921.6 Kbps.

256 byte buffer for upstream and downstream data flow.

Direct power from USB port, no external power necessary.

Surge protection on RS422/485 data lines.

Power and TX/RX communication LED indicator.

DIN rail or panel mount support.

Driver Support: Android/Win8.1/Vista64/32,

Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0, and Linux, and Mac OS .

Specifications

Input: USB 2.0.
RS232 signal: 4 Pair16c450/16c550 compatible UARTS.
RS422 signal:4 Pair Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
RS485 signal: 4 Pair Differential 2 half-duplex wires (D+, D-).
Data Format: Asynchronous data with any combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Flow Control: Xon/Xoff, Hardware, None
Cable: USB 2.0 type A to type B cable.
Communication speed: 75~921Kbps.
RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
RS232 line protection: +/- 15KV ESD.
Distance: RS422/485 Up to 4000ft (1250M).
Connection type: Screw terminal for maximum AWG #12 ~ 30 wires.
Din-Rail mountable: Option.
Power consumption: 190mA by USB power.
Operating environment: -10 to 60℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 111mm X 26mm.
Weight: 691(W/Packing) .
Humidity: 10-90% non-condensing.

TRY-TRP-C08-Set 95,30 �

Thu, 16 Dec 2021 14:48:24 +0100

TRY-TRP-C08-Set (TRP-C08 + LI-USB-A/B + DIN-RAIL-R)

Introduction

The TRP-C08 allows you to connect your serial devices to systems by using a USB interface.

With auto configuration in data format, baud rate and RS-485 data flow direction control.

TRP-C08 is able to automatically configure RS-232,

RS-422 or RS-485 signals to baud rate without external switch setting.

TRP-C08 is equipped with 3000V DC of isolation and internal surge-protection on

each data lines to protect the host computer and converter against high voltage spikes,

as well as ground potential difference.

TRP-C08 also features a high-speed 256 Kb/s transmission rate, and supports various O.S.

The industry DIN rail and panel mounting design enable user a fast and professional installation.

Features

Full compliance with the USB V1.0 and 2.0 specification.

System gets 1 COM port when the converter is connected.

Auto data format detecting.

Auto direction flow control on RS-485.

Programmable baud rate from 75 bps to 6 Mbps

RS232/422/485 Support 3KV isolation

256 byte buffer for upstream and downstream data flow.

Direct power from USB port , no external power necessary.

3000V DC isolated protection.

Surge protection on RS422/485 data lines.

Power/TX/RX mode LED indicator.

DIN rail or panel mount support.

Driver support: Android/Windows 8/8.1/ 98/ME/2000/XP/CE3.0,

and Linux, and Mac OS.

Specifications

USB interface: Fully compliant with V1.0, 2.0 specification.

USB to serial bridge controller; Prolific PL2303TA (TRP-C08 Version:2.1).

RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).

RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).

RS-485 signal: Differential 2 half-duplex wires (D+, D-).

Data Format: Asynchronous data with all common combination of bits, parity, stop.

Parity type: None, odd, even mark, space.

Data bit: 5, 6, 7, 8 or 16.

Stop bits: 1, 1.5, 2.

Cable: USB type A to type B.

Communication speed: 75~128KBbps.

RS-422/485 line protection: Against surge, short circuit, and voltage peak.

Transmission distance: RS-422/485 Up to 4000ft (1200M ).

Connection type: Screw terminal accepts AWG #12~30 wires.

Signal LED: Power on, TX, RX.

Direct power from USB port.

Power consumption: 1.2W.

Isolation voltage: 3000V DC.

Operating environment: -10 to 50℃ .

Storage temperature: -20 to 70℃.

Humidity: 10-90% Non-condensing.

Dimension: 151mm X 75mm X 26mm .

Weight: 375g .

TRY-TRP-C08+LI-USB-A/B 89,30 �

Wed, 19 Feb 2020 13:49:15 +0100

TRY-TRP-C08+LI-USB-A/B

TRY-TRP-C08M 266,00 �

Thu, 09 Sep 2021 13:24:26 +0200

TRP-C08M USB to 4 RS-232/422/485 Isolated Converter

Introduction
TRP-C08M is a USB to RS232/422/485 Isolated Converter support 3KV isolation,

built-in RS422/485 interface Surge Protection to ensure the stability of the transmitted data,

suitable for applications in harsh industrial Environments.
TRP-C08M bridge using the latest USB chip that can set up a separate data format

baud-rate and other self-defined baud-rate for each COM port it has the ability to automatically

select RS232/422/485 Signal Through a simple wiring.
TRP-C08M Support two power input, USB Power or external input POWER SUPPLY,

two types are available over-voltage protection.

Features

USB-2.0 Device Controller.

Support 3KV isolation in RS232/RS422/485 interface.

Customer-specified Baud rates are also supported.

Each Port cans impendent set up the baud-rate and data format.

On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port.

Fully PLC support such as Mitsubishi Q,FX and FATEK serial....

Auto direction flow control on RS-485.

Auto baud rate switching from 75bps to 921.6 Kbps.

Auto switching RS232/422/485 interface.

256 byte buffer for upstream and downstream data flow.

Direct power from USB port or external power.

Surge protection on RS422/485 data lines.

Power and TX/RX communication LED indicator.

DIN rail or panel mount support.

Driver Support: Android/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0,

and Linux, and Mac OS .

Specifications

Input: USB 2.0.
RS232 signal: isolated 3KV 4 Pair16c450/16c550 compatible (TXD, RXD, RTS, CTS, ISO. GND)
RS422 signal: isolated 3KV 4 Pair Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
RS485 signal: isolated 3KV 4 Pair Differential 2 half-duplex wires (D+, D-).
Data Format: Asynchronous data with any combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Flow Control: Xon/Xoff, Hardware, None
Cable: USB 2.0 type A to type B cable.
Communication speed: 75~921Kbps.
RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
RS232 line protection: +/- 15KV ESD.
Distance: RS422/485 Up to 4000ft (1250M).
Connection type: Screw terminal for maximum AWG #12 ~ 30 wires.
Din-Rail mountable: Option.
Two power input: USB power or external Power.
Power consumption: 190mA by USB power.
Operating environment: -10 to 60℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 111mm X 26mm.
Weight: 691(W/Packing) .
Humidity: 10-90% non-condensing.