SWD.de/+ Manufacturer +/+ + + diverse Lieferanten + + + /### # more manufacturers + supplier without names ### products

DIV-Bartec-07-5803-245A-100 5.495,00 �

Tue, 03 Nov 2015 11:44:00 +0100

Self-limiting parallel heating tape HSB AC 254 V

DIV-GE-P485-C 885,00 �

Tue, 02 Feb 2016 17:26:19 +0100

P485 Modbus to Profibus Converter

The P485 Modbus to Profibus Converter acts as a gateway between a Modbus RTU network and a Profibus-DP network. Integration of Modbus devices into Profibus networks is enabled without loss of functionality, control, and reliability, both when retrofitting to existing equipment as well as when setting up new installations. The P485 Modbus to Profibus Converter is an external DIN-rail mounted device which provides Profibus network connectivity to Modbus devices via a serial RS232/RS422/RS485 interface. The P485 is configured using the P485/D485 configuration cable and the EnerVista P485/D485 Setup Software.

Integrate GE relays, meters or any Modbus-compliant devices into Profibus networks
Maintain monitoring and control functionality of integrated Modbus devices
Easy-to-use, PC-based EnerVista Setup Software for simple configuration
Integrate your protection and automation systems into one network

Connects up to 10 Modbus devices to a Profibus network
Contains preconfigured memory maps for specific GE Multilin devices
Complete Profibus-DP slave functionality as per IEC 61158
Supports standard Profibus functions including:
- Synchronous commands
- Freeze last Data
- Communications Watchdog
Supports Profibus baud rate of 9.6Kbps to 12 Mbps
Profibus interface supported: RS485
Acts as a master to Modbus RTU devices
Supports Modbus baud rate of 1200bps to 57600bps
Modbus interfaces supported: RS232, RS422, RS485
Supports up to 50 Modbus Transactions
416 bytes of total data exchange
- Up to 244 bytes of data to Modbus devices
- Up to 244 bytes of data to Profibus master
Configured using the EnerVista P485/D485 Setup Software
Upload common configuration files onto multiple P485 devices
DIN-rail mountable
24 VDC input power
CE, UL and cUL certified
P/485/D485 Configuration Cable

DIV-P+F-NBB20-U1-Z2 95,00 �

Tue, 09 Feb 2016 11:35:53 +0100

Induktiver Sensor NBB20-U1-Z2

Datasheet excerpt: Technical data of NBB20-U1-Z2

General specifications
Switching element function		DC NO/NC
Rated operating distance		20 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 16.2 mm
Actual operating distance		18 ... 22 mm typ. 20 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.7
Nominal ratings
Operating voltage		5 ... 60 V DC
Switching frequency		0 ... 250 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		yes
Voltage drop		≤ 5 V
Voltage drop at I_L
	Voltage drop I_L = 100mA, switching element on	... 5 V
Operating current		2 ... 200 mA
Off-state current		0 ... 0.5 mA
Switching state indicator		2 LED, yellow
Functional safety related parameters
MTTF_d		1162 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Core cross-section		max. 2.5 mm²
Housing material		PA/metal with epoxy powder coating
Sensing face		PA
Degree of protection		IP68 / IP69K
Mass		225 g
Note		Tightening torque: 1.8 Nm (housing) Tightening torque: 1.0 Nm (Screw terminal)

DIV-GE-P/485/D485 135,00 �

Tue, 02 Feb 2016 12:32:43 +0100

P/485/D485 Configuration Cable for GE P485

DIV-GE-P485 750,00 �

Tue, 02 Feb 2016 12:00:35 +0100

P485 Modbus to Profibus Converter

Integrate GE relays, meters or any Modbus-compliant devices into Profibus networks
Maintain monitoring and control functionality of integrated Modbus devices
Easy-to-use, PC-based EnerVista Setup Software for simple configuration
Integrate your protection and automation systems into one network

Connects up to 10 Modbus devices to a Profibus network
Contains preconfigured memory maps for specific GE Multilin devices
Complete Profibus-DP slave functionality as per IEC 61158
Supports standard Profibus functions including:
- Synchronous commands
- Freeze last Data
- Communications Watchdog
Supports Profibus baud rate of 9.6Kbps to 12 Mbps
Profibus interface supported: RS485
Acts as a master to Modbus RTU devices
Supports Modbus baud rate of 1200bps to 57600bps
Modbus interfaces supported: RS232, RS422, RS485
Supports up to 50 Modbus Transactions
416 bytes of total data exchange
- Up to 244 bytes of data to Modbus devices
- Up to 244 bytes of data to Profibus master
Configured using the EnerVista P485/D485 Setup Software
Upload common configuration files onto multiple P485 devices
DIN-rail mountable
24 VDC input power
CE, UL and cUL certified
*NOTE*
*A P/485/D485 Configuration Cable is required for programming the P485 and D485 converters.Only one cable is needed for all of your converter devices.

DIV-Bartec-07-5803-145A-100 6.430,00 �

Thu, 03 Dec 2015 15:52:07 +0100

Self-limiting parallel heating tape HSB AC 120 V