SWD.de/Top of the Shop

CTI-BLG020-07 221,20 �

Wed, 15 Dec 2021 07:42:24 +0100

BLG020-07 BlueStorm/LP PCI 4-port RS-232, surge suppression, with standard height bracket, addit. Low profile, DB25f cable, RoHS compliant as customer special design

CFR-TTL33-232-1 28,00 �

Tue, 26 Jan 2021 11:26:27 +0100

Industrial Port-Powered RS232 to TTL 3.3V Converter

Model: TL33-232-1

The TTL33-232-1 is a compact, industrial-grade, port-powered RS-232 to TTL 3.3V converter, which can be used to convert RS-232 to 3.3V TTL / CMOS compatible levels and vice versa. The unit is efficiently powered from the RS-232 data line, and it comes with the auto-sensing and self-adjusting features, which automatically adjust baud rate, parity, stop bit and other COM port parameters to the devices that they are connected to. Therefore, it requires no external power or software drivers, making the unit a highly reliable and truly plug-and-play device.

TTL 3.3V | 300 to 115.2K Baud

CFR-CVT-232A-3 30,55 �

Thu, 03 Jun 2021 23:20:59 +0200

CVT-232A-3, 3-Wire Industrial Port-Powered RS232 Isolator

The CVT-232A-3 is a compact, rugged, industrial-grade, port-powered, 3-wire RS232 isolator. This 3-wire RS232 opto-isolator features 5000V opto-isolation circuitry and optically isolates three (3) RS-232 lines (TX, RX and GND), which effectively protects your RS-232 devices from ground loops, noise problems, transient surges, remote lightning and spikes. The unit operates within a temperature range of -40ºF to 185ºF (-40ºC to 85ºC), and features 600W surge protection and 15kV ESD static protection. This 3-wire RS232 isolator is efficiently powered from the RS232 data line, and it comes with the auto-sensing and self-adjusting features, which automatically adjust baud rate, parity, stop bit and other COM port parameters to the devices that it is connected to. Therefore, it requires no external power, manual settings or software drivers, making the unit a highly reliable and truly plug-and-play device.

See also: A custom-made product of CVT-232A-3 with reversed bolts and nuts (Part Number: CVT-232A(C)-3).

CFR-USB-232A-1 33,95 �

Thu, 09 Dec 2021 12:39:24 +0100

Port-powered USB TO dual RS232 ADAPTER / USB TO DUAL RS232 CONVERTER

INTRODUCTION (USB TO DUAL RS232 CONVERTER)

The USB-232A-1 is a port-powered, bi-directional USB to RS232 converter that can be used to convert any standard USB port (USB 2.0 - backward compatible) into two RS232C ports and vice versa.

This high-quality, high-performance USB to dual RS232 converter uses the latest FTDI chipset and is fully compatible with Windows 8 / 7 / Vista / XP / Server2008 / Server2003 / 2000 / 98 (32-bit), Windows 8 / 7 / Vista / XP / Server2008 / Server2003 (64-bit), Win CE, Mac, and Linux. The unit comes with a USB type A female connector on the USB side and two DB9 male connectors on the RS232 side.

CommFront's product quality is ensured by our strict ISO 9001:2008 quality control system, and we back our high-quality USB RS232 converter /adapter products with a 30-day risk-free money-back guarantee and a 5-year replacement warranty.

INTRODUCTION:	The USB-232A-1 is a port-powered USB to dual RS-232 converter that can be used to convert any standard USB port (USB 2.0 backward compatible) into two RS-232C ports. The unit uses the latest FTDI chipset and is fully compatible with Windows 7/Vista/XP/Server2008/Server2003/2000/98 (32-bit), Windows 7/Vista/XP/Server2008/Server2003 (64-bit), Win CE, Mac, and Linux.
FEATURES:	Adds two RS-232 ports to your USB port. RS-232 data & signals: TX, RX, RTS, CTS, DTR, DSR, DCD, RI, and GND. Supports Windows 7/Vista/XP/Server2008/Server2003/2000/98 (32-bit), Windows 7/Vista/XP/ Server2008/Server2003 (64-bit), Win CE, Mac, and Linux. Supports remote wakeup and power management. No IRQs required, no IRQ conflicts. Port-powered, no external power required. Plug and play (hot-pluggable, data format auto-sensing and self-adjusting). CE/FCC certified.
SPECIFICATIONS:
Compatibility:	USB 2.0 (backward compatible) and EIA/TIA RS-232C standards
Power Source:	From USB port
Current Consumption:	Under 100mA
Output Power on Pin 3 (TX):	About -9VDC
RS-232 Data Rate:	300 to 128,000bps (auto-sensing and self-adjusting)
Distance:	USB side: 10ft (3m); RS-232 side: 16ft (5m)
Connector:	USB side: 10ft (3m); RS-232 side: 16ft (5m)
LEDs:	2x TX, 2x RX and 1x Power
Dimensions (H x W x D):	0.9 x 2.8 x 3.5 in (24 x 72 x 88 mm) (excluding cable)
Weight:	2.9 oz (83 g)
Cable Length:	2 ft (0.6 m)
Operating Temperature:	32F to 95F (0C to 35C)
Operating Humidity:	Up to 90% RH (no condensation)

CFR-RPT-485_422-4 101,95 �

Thu, 25 Nov 2021 09:20:26 +0100

Industrial Opto-Isolated RS485 RS422 Converter / RS485 to RS422 Repeater

Model: RPT-485_422-4

The RPT-485_422-4 is a rugged, industrial-grade, optically-isolated RS485 / RS422 repeater / converter, which can be used to extend the RS485 or RS422 distance to up to 4000 ft (1.2km), it can also can be used to convert a 2-wire RS485 signal into a 4-wire RS422 signal, and vice versa. This product features 2500V opto-isolation circuitry, which effectively protects your RS422 / RS485 devices from transient surges, ground loop, remote lightning and spikes. The unit supports serial data rates up to 115,200bps and features data format auto-sensing and self-adjusting, and, therefore, no DIP switch or jumpers are required. When working with RS485 signals, the CommFront’s auto-turnaround feature eliminates the need for software drivers and flow control.

2-wire RS485 or 4-wire RS422/RS485 | 300 to 115.2K Baud

CFR-HUB-485-4 127,45 �

Tue, 05 Oct 2021 16:05:43 +0200

Industrial Opto-Isolated RS485 Hub (Externally-powered)

Model: HUB-485-4

The HUB-485-4 is a rugged, industrial-grade, optically-isolated RS-485 Hub/Splitter/Repeater, which supports multi-drop 2-wire RS485 networks and can be used to expand RS485 networks by splitting one RS485 network into four (star wiring), in turn increasing the maximum number of nodes and the distance covered by an RS485 network. The product features 2500V opto-isolation circuitry and supports data direction auto-turnaround. The unit is powered from an external 9 to 30VDC power supply (included), and it can be mounted directly on a wall, panel or DIN Rail, without a need of using any unsecured DIN-Rail or wall-mount brackets.

2-wire RS485 | 300 to 115.2K Baud

CTI-BSG001 415,00 �

Thu, 14 Oct 2021 15:50:31 +0200

BSG001 BlueStorm/SP Opto, 4 ports RS-232/422/485, includes 3kV optical isolation and surge suppression - RoHS compliant

TRY-TRP-C08 85,40 �

Mon, 20 Dec 2021 08:52:31 +0100

TRP-C08 USB to RS-232/422/485 Isolated Converter (Version:2.1)

Introduction

The TRP-C08 allows you to connect your serial devices to systems by using a USB interface.

With auto configuration in data format, baud rate and RS-485 data flow direction control.

TRP-C08 is able to automatically configure RS-232,

RS-422 or RS-485 signals to baud rate without external switch setting.

TRP-C08 is equipped with 3000V DC of isolation and internal surge-protection on

each data lines to protect the host computer and converter against high voltage spikes,

as well as ground potential difference.

TRP-C08 also features a high-speed 256 Kb/s transmission rate, and supports various O.S.

The industry DIN rail and panel mounting design enable user a fast and professional installation.

Features

Full compliance with the USB V1.0 and 2.0 specification.

System gets 1 COM port when the converter is connected.

Auto data format detecting.

Auto direction flow control on RS-485.

Programmable baud rate from 75 bps to 6 Mbps

RS232/422/485 Support 3KV isolation

256 byte buffer for upstream and downstream data flow.

Direct power from USB port , no external power necessary.

3000V DC isolated protection.

Surge protection on RS422/485 data lines.

Power/TX/RX mode LED indicator.

DIN rail or panel mount support.

Driver support: Android/Windows 8/8.1/ 98/ME/2000/XP/CE3.0,

and Linux, and Mac OS.

Specifications

USB interface: Fully compliant with V1.0, 2.0 specification.

USB to serial bridge controller; Prolific PL2303TA (TRP-C08 Version:2.1).

RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).

RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).

RS-485 signal: Differential 2 half-duplex wires (D+, D-).

Data Format: Asynchronous data with all common combination of bits, parity, stop.

Parity type: None, odd, even mark, space.

Data bit: 5, 6, 7, 8 or 16.

Stop bits: 1, 1.5, 2.

Cable: USB type A to type B.

Communication speed: 75~128KBbps.

RS-422/485 line protection: Against surge, short circuit, and voltage peak.

Transmission distance: RS-422/485 Up to 4000ft (1200M ).

Connection type: Screw terminal accepts AWG #12~30 wires.

Signal LED: Power on, TX, RX.

Direct power from USB port.

Power consumption: 1.2W.

Isolation voltage: 3000V DC.

Operating environment: -10 to 50℃ .

Storage temperature: -20 to 70℃.

Humidity: 10-90% Non-condensing.

Dimension: 151mm X 75mm X 26mm .

Weight: 375g .

CFR-FBR(M)-Serial-2(MM / ST) 318,70 �

Thu, 16 Dec 2021 14:33:55 +0100

RS232 / RS485 / RS422 TO MULTI-DROP FIBER OPTIC CONVERTER (INDUSTRIAL / MULTIMODE / ST)

Modell: FBR (M) -Serial-2(MM / ST)

Multi-Mode (3 miles / 5 km) | ST Connectors

The FBR(M)-Serial-2 (MM / ST) is an advanced, multi-mode (MM), rugged, industrial-grade RS232 / RS422 / RS485 to fiber optic converter that supports asynchronous RS232 / RS422 / RS485 communications through multi-drop fiber optic links. The FBR(M)-Serial-2 supports up to 255 fiber nodes, and each fiber node can extend the RS232 / RS422 / RS485's distance to 3 miles (5km) for multi-mode converters and cables.

Depending on the site situation, the FBR(M)-Serial-2 can be configured as a daisy-chain or a self-healing / redundant ring fiber network. When configured as a ring fiber network, the built-in self-healing feature allows the data to be transmitted clockwise or counterclockwise; therefore, failure of any individual converter will not affect other devices located on the same fiber ring, making the entire data network more robust and reliable. The unit also features redundant power supplies and power alarm outputs for uninterrupted system performance and easy maintenance. The FBR(M)-Serial-2 runs on a light-speed fiber backbone inherently resistant to radio and electrical interference, such as EMI / RFI, lightning, transient surges and ground loops, and it overcomes the limitations of conventional point-to-point fiber network and dramatically expands the serial data network in terms of distance, flexibility, and reliability. The FBR(M)-Serial-2 (MM / ST) comes with ST connectors for fiber optic links, and it accepts a wide range of industrial DC input (from 12V to 48V DC). The product can be mounted directly on a DIN Rail, without a need of using any unsecured DIN-Rail brackets or adapters.

Features

Industrial RS232 / RS485 / RS422 to multi-drop fiber optic converter.
Daisy-chain or self-healing / redundant ring fiber network configurations.
Extends serial data network uninterruptedly over extremely large areas.
Designed for harsh industrial environments.
Direct DIN-Rail mounting without using any unsecured brackets or adapters.
Multi-mode with ST fiber optic connectors.
Supports up to 255 fiber nodes.
Supports up to 128 nodes of RS-485 / 422 devices per fiber node.
Fiber link distance (multi-mode): 3 miles (5km) per fiber node.
Full redundant power supply and fiber network.
No software drivers required.
Power loss alarm relay output.
Built-in selectable 120-Ohm end-of-line terminator for RS485/RS422 busses.
Operating temperature: -40ºF to 185ºF (-40ºC to 85ºC).
Built-in 600W surge protection, 15kV static protection and circuit protection.
Surface Mount Technology manufactured to RoHS and ISO-9001 standards.
Safety: Strictly certified by TUV (Cert No. SG-FCC-140002; E8N140387592001).
5-year manufacturer's warranty.

Specifications

Part Number:	FBR(M)-Serial-2
Compatibility:	EIA/TIA RS-232C, RS-485, and RS-422 standards
Power Source:	12 to 48V DC
Consumption:	Less than 5W
Wavelength:	1310nm
Output Power (Fiber):	Single-Mode: -8dBm(Min); -7dBm(Typical); -5dBm(Max) Multi-Mode: -15dBm(Min); -10dBm(Typical); -8dBm(Max)
Sensitivity (Fiber):	Single-Mode: -35dBm; Multi-Mode: -34dBm
Usable Fiber Optic Cables:	Single-mode: 8.3 / 125, 8.7 / 125, 9 / 125, 10 / 125µm Multi-mode: 50 / 125, 62.5 / 125µm
Maximum Number of Nodes:	Fiber: 255 nodes; RS485 / RS422: 128 nodes
Serial Data Rates:	300 to 115,200bps (auto-sensing and self-adjusting)
Distance (Serial Port):	RS232: 16ft (5m); RS485 / RS422: 4000ft (1.2km)
Distance (Fiber Lines):	Multi-mode: 3 miles (5km) per fiber node; Single-mode: 25 miles (40km) per fiber node
Connectors (Serial Port):	7-way terminal block (1x RS-232, 1x RS-485, 1x RS-422)
Connectors (Fiber Links):	4x ST Connector; 4x SC Connector; or 4x FC Connectors
Connectors (Power):	6-way terminal block (1x V1 power, 1x V2 power, 1x Alarm)
Surge protection:	600W
Electro-Static Discharge (ESD):	Up to 15kV
Dimensions (H x W x D):	5.7 x 3.8 x 1.3 in (144 x 97 x 33 mm) - excluding connectors
Weight:	1 kb (460 g)
Operating Temperature:	-40ºF to 185ºF (-40ºC to 85ºC)
Operating Humidity:	Up to 90% RH (no condensation)

CTI-CBG117 16,90 �

Thu, 14 Oct 2021 15:50:32 +0200

RJ-45 panel mount to 10-pin MiniTek w/Latch cable. (MPG104 requires 2x CBG117 per board)

CFR-TTL-232-1 28,00 �

Wed, 10 Nov 2021 17:26:55 +0100

TTL-232-1 Industrial Port-Powered RS232 to TTL 5V Converter

Modell: TTL-232-1

The TTL-232-1 is a compact, rugged, industrial-grade, port-powered RS232 to TTL converter that can be used to convert RS232 to 5V TTL / CMOS compatible levels and vice versa. This industrial RS232 to TTL converter operates within a temperature range of -40ºF to 185ºF (-40ºC to 85ºC), and features 600W surge protection and 15kV ESD static protection. The unit is efficiently powered from the RS232 data line, and the full-duplex RS232 to full-duplex TTL conversion eliminates the need of auto-turnaround feature. This RS232 to TTL converter also comes with the auto-sensing and self-adjusting features, which automatically adjust baud rate, parity, stop bit and other COM port parameters to the devices that it is connected to. Therefore, it requires no external power, manual settings or software drivers, making the unit a highly reliable and truly plug-and-play device for both commercial and industrial applications.

Features:

Converts RS232 to 5V TTL/CMOS and vice versa.
Port-powered, no external power or RTS, DTR required.
Industrial grade enclosed in a rugged, rustless ABS housing.
300 to 115.2K Baud operation (auto-sensing & self-adjusting).
Operating temperature: -40ºF to 185ºF (-40ºC to 85ºC).
Plug and play (hot-pluggable; data format auto-sensing & self-adjusting).
No software drivers, flow control, DIP switch or jumper settings required.
Built-in 600W surge protection, 15kV static protection and circuit protection.
Surface Mount Technology manufactured to RoHS and ISO-9001 standards.
Safety: Strictly certified by TUV (Cert No. SG-CE-090012).
5-year manufacturer's warranty.

Specifications:

Part Number:	TTL-232-1
Compatibility:	EIA/TIA RS-232C standard and TTL 5V level
Power Source:	Port power from RS232 data line
Current Consumption:	Less than 10mA
Baud Rates:	300 to 115,200bps (Auto-sensing & Self-adjusting)
Distance:	RS232 side: 16ft (5m); TTL side: 10ft (3m)
Connector:	RS232 Side: DB-9 Female; TTL Side: DB-9 Male; Termination Board: DB-9 Female and a 3-Way Terminal Block
Surge protection:	600W
Static protection (ESD):	Up to 15KV
Dimensions (H x W x D):	0.63 x 1.3 x 3.5 in (16 x 32 x 88 mm) (with Termination Board)
Weight:	1.27 oz (36 g) (with Termination Board)
Operating Temperature:	-40ºF to 185ºF (-40ºC to 85ºC)
Operating Humidity:	Up to 90% RH (no condensation)

CFR-TTL-485-2noPS 34,00 �

Tue, 18 Feb 2020 14:12:27 +0100

Industrial Externally-Powered RS485 to TTL 5V Converter, no power supply

Model: TTL-485-2

The TTL-485-2 is a compact, industrial-grade RS485 to TTL converter, which can be used to convert 2-wire RS485 to 5V TTL / CMOS compatible levels and vice versa. The unit is powered from an external 5V DC regulated power supply (not included); it supports data direction auto-turnaround, which automatically enables the RS485 transceiver when data is present on the TTL side. Therefore, it requires no software drivers or flow control, making the unit a highly reliable and truly plug-and-play device. The built-in selectable 120-Ohm terminator can be turned ON or OFF through a simple jumper setting, thus making the unit an ideal solution for all types of applications.

TTL 5V | 2-wire RS485 | 300 to 115.2K Baud

TRY-TRP-C08-Set 95,30 �

Thu, 16 Dec 2021 14:48:24 +0100

TRY-TRP-C08-Set (TRP-C08 + LI-USB-A/B + DIN-RAIL-R)

Introduction

The TRP-C08 allows you to connect your serial devices to systems by using a USB interface.

With auto configuration in data format, baud rate and RS-485 data flow direction control.

TRP-C08 is able to automatically configure RS-232,

RS-422 or RS-485 signals to baud rate without external switch setting.

TRP-C08 is equipped with 3000V DC of isolation and internal surge-protection on

each data lines to protect the host computer and converter against high voltage spikes,

as well as ground potential difference.

TRP-C08 also features a high-speed 256 Kb/s transmission rate, and supports various O.S.

The industry DIN rail and panel mounting design enable user a fast and professional installation.

Features

Full compliance with the USB V1.0 and 2.0 specification.

System gets 1 COM port when the converter is connected.

Auto data format detecting.

Auto direction flow control on RS-485.

Programmable baud rate from 75 bps to 6 Mbps

RS232/422/485 Support 3KV isolation

256 byte buffer for upstream and downstream data flow.

Direct power from USB port , no external power necessary.

3000V DC isolated protection.

Surge protection on RS422/485 data lines.

Power/TX/RX mode LED indicator.

DIN rail or panel mount support.

Driver support: Android/Windows 8/8.1/ 98/ME/2000/XP/CE3.0,

and Linux, and Mac OS.

Specifications

USB interface: Fully compliant with V1.0, 2.0 specification.

USB to serial bridge controller; Prolific PL2303TA (TRP-C08 Version:2.1).

RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).

RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).

RS-485 signal: Differential 2 half-duplex wires (D+, D-).

Data Format: Asynchronous data with all common combination of bits, parity, stop.

Parity type: None, odd, even mark, space.

Data bit: 5, 6, 7, 8 or 16.

Stop bits: 1, 1.5, 2.

Cable: USB type A to type B.

Communication speed: 75~128KBbps.

RS-422/485 line protection: Against surge, short circuit, and voltage peak.

Transmission distance: RS-422/485 Up to 4000ft (1200M ).

Connection type: Screw terminal accepts AWG #12~30 wires.

Signal LED: Power on, TX, RX.

Direct power from USB port.

Power consumption: 1.2W.

Isolation voltage: 3000V DC.

Operating environment: -10 to 50℃ .

Storage temperature: -20 to 70℃.

Humidity: 10-90% Non-condensing.

Dimension: 151mm X 75mm X 26mm .

Weight: 375g .

DIV-ENC-0101TB-LevelOne-RTL8029AS_ref 29,50 �

Tue, 14 Jul 2020 15:03:13 +0200

DIV-ENC-0101TB-LevelOne-RTL8029AS_ref LevelOne Ethernet PCI Adapter 10Mbps BNC/STP

DIV-DE-528CT-D-Link-RTL8029AS_ref 29,50 �

Thu, 29 Jul 2021 11:16:44 +0200

DE-528CT_ref D-Link Ethernet 10Base-2, Ethernet 10Base-T PCI 10Mbps

D-Link DE 528CT - network adapter Series Specs

OVERVIEW
SPECS

 
 
D-Link DE-528CT - network adapterPart Number: DE-528CT/50 
3 Related Models

GENERAL

Packaged Quantity (for specs)
50
Interface (Bus) Type
PCI
Manufacturer
D-Link


POWER DEVICE

Type
none


NETWORKING

Cabling Type
Ethernet 10Base-2, Ethernet 10Base-T
Interface (Bus) Type
PCI
Type
network adapter
Connectivity Technology
wired
Data Link Protocol
Ethernet
Features
full duplex capability
Compliant Standards
IEEE 802.3
Data Transfer Rate
10 Mbps
Status Indicators
Link OK


INTERFACE PROVIDED

Gender
female
Connector Qty
1
Type
network
Interface
Ethernet 10Base-2, Ethernet 10Base-T
Qty
1
Connector Type
BNC, RJ-45


MISCELLANEOUS

Mounting Kit
not available


SYSTEM REQUIREMENTS

OS Required
Artisoft LANtastic, Banyan VINES, Microsoft Windows 3.11, Microsoft Windows 95, Microsoft Windows NT 3.1, Microsoft Windows NT 4.0, Novell NetWare 3.11


ENVIRONMENTAL PARAMETERS

Min Operating Temperature
32 °F
Max Operating Temperature
131 °F
Humidity Range Operating
10 - 90%


HEADER

Brand
D-Link
Product Line
D-Link
Model
DE-528CT
Packaged Quantity
50
Compatibility
PC


DIMENSIONS & WEIGHT

Depth
4.7 in
Height
3.1 in
Weight
0.22 lbs


CABLE DETAILS

Type
none


SOFTWARE

Type
Drivers & Utilities


SLOT REQUIRED

Type
PCI
Form Factor
half-length
Total Qty
1


SERVICE & SUPPORT

Type
limited lifetime warranty


SERVICE & SUPPORT DETAILS

Type
limited warranty
Service Included
replacement
Location
carry-in
Full Contract Period
lifetime


GENERAL

Manufacturer
D-Link

DIV-ND4300-E-PCI-COMBO-RTL8029AS_ref 29,50 �

Fri, 27 Apr 2018 18:12:03 +0200

DIV-ND4300-E-PCI-COMBO-RTL8029AS_ref Network Card NE-2000 compatible Ethernet 10-BaseT (RJ45 UTP) and 10-Base2 (coaxial BNC connector) with speed up to 10Mbps. PnP PCI slot available. Call for Availability, refurbished

The ND4300-E is a high performance Ethernet Adapter. Designed to be simple and easy to use, it comes with drivers for all popular Network Operating Systems. Featuring the industry standard high-performance, Plug-and-Play (PnP), PCI Local Bus Specifications, Rev 2.0, it is auto-configurable.
 
An RJ-45 port and a BNC port are provided for connecting to either a 10Base-T or a 10Base-2 network. Media auto-sensing senses the network type connected and configures the adapter accordingly. LED indicators are provided for convenient monitoring and analysis of network and adapter functions. Full-duplex doubles data transmission speed to 20 Mbps by permitting simultaneous data transmission and reception. A ROM socket is provided on the card to allow a diskless workstation to boot up from the network system.

DIV-KI-PCI-KTI Networks-RTL8029AS_ref 29,50 �

Mon, 30 Apr 2018 15:50:16 +0200

KI-PCI KTI NETWORKS KE-PCI LOW PROFILE ETHERNET CARD PCI 10BASE-T AND 10BASE-2 COAX THINNET

DIV-EN5200PXA-EDIMAX-RTL8029AS_ref 29,50 �

Tue, 01 May 2018 15:57:17 +0200

EN5200PXA EDIMAX ETHERNET CARD PCI 10BASE-T AND 10BASE-2 COAX THINNET

Edimax EN 5200PXA - network adapter Series Specs

Edimax EN 5200PXA - network adapter

Part Number: EN-5200PXA

POWER DEVICE

Type

None

INTERFACE PROVIDED

Gender

Female, Female
Connector Qty

1, 1
Type

Network, Network
Interface

Ethernet 10Base-T, Ethernet 10Base-T
Qty

1, 1
Connector Type

RJ-45, BNC
Connector Location

External, External

NETWORKING

Cabling Type

Ethernet 10Base-2, Ethernet 10Base-T
Data Transfer Rate

10 Mbps
Status Indicators

Link activity, Port transmission speed
Network / Transport Protocol

IPX/SPX, TCP/IP
Features

Full duplex capability
Data Link Protocol

Ethernet
Compliant Standards

IEEE 802.3
Connectivity Technology

Wired

RAM

Installed Size

32 KB

SYSTEM REQUIREMENTS

OS Required

Microsoft Windows NT, UNIX, Microsoft Windows 95/98

ENVIRONMENTAL PARAMETERS

Min Operating Temperature

32 °F
Max Operating Temperature

131 °F
Humidity Range Operating

10 - 90%

HEADER

Product Line

Edimax EN
Model

5200PXA
Packaged Quantity

1
Compatibility

PC, Unix

INTERFACE REQUIRED

Type

None

EXPANSION SLOTS

Total Qty

1
Free Qty

1

DIMENSIONS & WEIGHT

Depth

6.5 in
Height

4.8 in

SOFTWARE

Type

Drivers & Utilities

SLOT REQUIRED

Type

PCI
Total Qty

1

SERVICE & SUPPORT

Type

Limited lifetime warranty

SERVICE & SUPPORT DETAILS

Service Included

Parts and labor
Type

Limited warranty
Full Contract Period

Lifetime
Location

Carry-in

GENERAL

Manufacturer

Edimax Technology

LW40WSR300-Magitronic I-32_ref 29,50 �

Tue, 01 May 2018 11:10:13 +0200

LW40WSR300-Magitronic I-32_ref Ethernet 10Base-2, Ethernet 10Base-T PCI 10Mbps

LW40WSR300 Magitronic I-32 Network Adaper 10Mbps

OVERVIEW
SPECS

 
 

 
Interface (Bus) Type
PCI
Manufacturer
Magitronic


POWER DEVICE

Type
none


NETWORKING

Cabling Type
Ethernet 10Base-2, Ethernet 10Base-T
Interface (Bus) Type
PCI
Type
network adapter
Connectivity Technology
wired
Data Link Protocol
Ethernet
Features
full duplex capability
Compliant Standards
IEEE 802.3
Data Transfer Rate
10 Mbps
Status Indicators
Link OK


INTERFACE PROVIDED

Gender
female
Connector Qty
1
Type
network
Interface
Ethernet 10Base-2, Ethernet 10Base-T
Qty
1
Connector Type
BNC, RJ-45


MISCELLANEOUS

Mounting Kit
not available


SYSTEM REQUIREMENTS

OS Required
Artisoft LANtastic, Banyan VINES, Microsoft Windows 3.11, Microsoft Windows 95, Microsoft Windows NT 3.1, Microsoft Windows NT 4.0, Novell NetWare 3.11


ENVIRONMENTAL PARAMETERS

Min Operating Temperature
32 °F
Max Operating Temperature
131 °F
Humidity Range Operating
10 - 90%


HEADER

Brand
Magitronic
Product Line
Magitronic
Model
L40WSR300 I-32
Packaged Quantity
 
Compatibility
PC


DIMENSIONS & WEIGHT

Depth
4.7 in
Height
3.1 in
Weight
0.22 lbs


CABLE DETAILS

Type
none


SOFTWARE

Type
Drivers & Utilities


SLOT REQUIRED

Type
PCI
Form Factor
half-length
Total Qty
1


SERVICE & SUPPORT

Type
limited lifetime warranty


SERVICE & SUPPORT DETAILS

Type
limited warranty
Service Included
replacement
Location
carry-in
Full Contract Period
lifetime


GENERAL

Manufacturer
Magitronic

DIV-RTL8029AS-RJ45-div_ref 19,50 �

Tue, 01 May 2018 17:54:51 +0200

RTL8029AS-RJ45_ref div/etc Ethernet, Ethernet 10Base-T PCI 10Mbps

OVERVIEW
SPECS

 
 
div/etc - network adapter 

Packaged Quantity (for specs)
Interface (Bus) Type
PCI
Manufacturer
div/etc


POWER DEVICE

Type
none


NETWORKING

Cabling Type
Ethernet 10Base-T
Interface (Bus) Type
PCI
Type
network adapter
Connectivity Technology
wired
Data Link Protocol
Ethernet
Features
full duplex capability
Compliant Standards
IEEE 802.3
Data Transfer Rate
10 Mbps
Status Indicators
Link OK


INTERFACE PROVIDED

Gender
female
Connector Qty
1
Type
network
Interface
Ethernet 10Base-T
Qty
1
Connector Type
RJ-45


MISCELLANEOUS

Mounting Kit
not available


SYSTEM REQUIREMENTS

OS Required
Artisoft LANtastic, Banyan VINES, Microsoft Windows 3.11, Microsoft Windows 95, Microsoft Windows NT 3.1, Microsoft Windows NT 4.0, Novell NetWare 3.11


ENVIRONMENTAL PARAMETERS

Min Operating Temperature
32 °F
Max Operating Temperature
131 °F
Humidity Range Operating
10 - 90%


HEADER

Brand
div/etc
Product Line
div/etc
Model
div/etc
Packaged Quantity
 
Compatibility
PC


DIMENSIONS & WEIGHT

Depth
4.7 in
Height
3.1 in
Weight
0.22 lbs


CABLE DETAILS

Type
none


SOFTWARE

Type
Drivers & Utilities


SLOT REQUIRED

Type
PCI
Form Factor
half-length
Total Qty
1


SERVICE & SUPPORT

Type
limited lifetime warranty


SERVICE & SUPPORT DETAILS

Type
limited warranty
Service Included
replacement
Location
carry-in
Full Contract Period
lifetime


GENERAL

Manufacturer
  div/etc