DAN-AFP1150SC

32-Bit PCI 100Base-FX (Single-/Multi-Mode) Low-/Standard-Profile Network Card

DEVICE DRIVERS Microsoft Windows 95/95OSR2/98/98SE/ME/NT4/2000/XP Novell NetWare Server 3.12/4.0/4.11/4.12/5.0/5.1/6.0 Novell NetWare DOS ODI Client Linux kernel v2.2.x & 2.4.x ONLY (No technical support provided)

TECHNICAL SPECIFICATIONS

• Model:
  AFP1150SC / AFP1150ST / AFP1150MT
  AFP1150SC20 / AFP1150SC60 / AFP1150DB3.20 / AFP1150DB5.20
  AFP1150LSC / AFP1150LST / AFP1150LMT
  AFP1150LSC20 / AFP1150LSC60 / AFP1150LDB3.20 / AFP1150LDB5.20
• Standards: IEEE 802.3u 100Base-FX
• Bus Architecture: 32-Bit PCI Bus Master
• Connector:
  AFP1150SC/LSC — Multi-Mode Duplex-SC, 1310nm
  AFP1150ST/LST — Multi-Mode Duplex-ST, 1310nm
  AFP1150MT/LMT — Multi-Mode MT-RJ, 1310nm
  AFP1150SC20/LSC20 — Single-Mode Duplex-SC/20km,
  AFP1150SC60/LSC60 — Single-Mode Duplex-SC/60km,
  AFP1150DB3.20/LDB3.20 — Single-Mode Simplex-SC/20km, TX 1310nm
  AFP1150DB5.20/LDB5.20 — Single-Mode Simplex-SC/20km, TX 1550nm
• Supports PXE ROM (P/N# PXEROM1X50, which comes with MBA Utility)
• Data Transfer Rate: 100Mbps
• Duplex Mode: Full or Half
• Cable:
  50/125, 62.5/125, 100/140µm Multi-Mode fiber, up to 2km
  9/125µm Single-Mode fiber, from 20 to 60km (model dependent)
• LEDs: LNK/ACT (Link/Activity), FDX (Full-Duplex)
• Power Requirement: 1.0A@+5V
• Operating Temperature: 0° to 50° C
• Humidity: 5% to 90%
• Dimension: 120 x 56mm (H x W)
• Bracket:
  AFP1150SC/ST/MT/SC20/SC60/DB3.20/DB5.20 — Standard Profile bracket
  AFP1150LSC/LST/LMT/LSC20/LSC60/LDB3.20/LDB5.20 — Low Profile bracket
• Safety: FCC Class A, CE Mark Approval, RoHS Compliance

Rev: 04/13