Did you forget your password?
© 2013 Uwe Wannags Hard-+ Software Distribution e.K (SWD)
HIL-NT100-RE-EN
1712.110 Hilscher NT100-RE-EN, Gateway POWERLINK Controlled Node to Open Modbus/TCP
High-End Gateway for demanding conversions
NT 100-RE-EN
- Integrates a subordinate Modbus TCP network trunk in POWERLINK
- Flexible use of Modbus TCP as Client or Server
- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
Technical Details
| Product | Product name | NT 100-RE-EN |
| Part number | 1712.110 | |
| Brief description | Gateway Real-Time-Ethernet to Ethernet | |
| Communication controller | netX | netX 100 |
| Integrated Memory | RAM | 8 MB SDRAM |
| FLASH | 4 MB serial Flash | |
| Memory card | Type and size | SD or MMC card, max. 2 GByte |
| Power supply | Supply voltage | 24 V DC ± 6 V |
| Maximum Current at 24 V (typically) | 130 mA | |
| Typical power consumption | 3,2 W | |
| Connector | Mini-COMBICON, 2-pin | |
| Reverse voltage protection | yes | |
| Requirement to the power supply | For UL conform usage: Device shall be supplied by an isolated voltage source | |
| Communication interface 1 | Communication standard | Ethernet |
| Interface type | 100BASE-TX or 10BASE-T, isolated | |
| Connector | 2 * RJ45 | |
| Communication interface 2 | Communication standard | Ethernet |
| Interface type | 100BASE-TX or 10BASE-T, isolated | |
| Connector | 1 * RJ45 | |
| Diagnostic interface | Type | USB |
| Connector | Mini-USB, 5-pin | |
| Displays | LED displays | SYS System status |
| APL Application status | ||
| COM Communication status | ||
| LINK Link, ACT Activity | ||
| Permitted ambient conditions | Ambient temperature (operation) | 0 … + 60 °C |
| Humidity | no condensation permitted | |
| Pollution degree | For UL-compliant usage: Device must be used in a pollution degree 2 environment | |
| Device | Dimensions (L x W x H) | 100 x 52 x 70 mm (without connector) |
| Weight | appr. 150 g | |
| Degree of protection | IP 20 | |
| Mounting | on DIN rail EN 60715 | |
| Conformity | RoHS | Yes |
| UL certification | UL | The device is UL 508 certified |
| UL file | UL-File No E334100 | |
| Conformance with EMC directives | CE sign | Yes |
| Emission | CISPR 11 Class A | |
| Immunity | EN 61131-2:2003 |
Rev: 05/21