OPT-G4IDC5-SW

G4IDC5-SW G4 DC Input - DC voltage, self-powered, normally open

The G4IDC5-SW module provides one isolated channel of contact status input. The module supplies 15 volts of power to
an external dry contact switch. The G4IDC5-SW senses switch closure. Each user-supplied switch is connected with two
wires. Because the module includes power for the switch, this module is particularly cost-effective when labor costs for
wiring external power are high.

Opto 22’s G4 DC input modules provide up to 4000 volts (transient) of optical isolation between field inputs and the logic
output of the circuit. This module is designed with filtering on the input and a hysteresis amplifier, providing high noise
rejection and transient-free, “clean” switching.

Typical applications for the G4IDC5-SW include sensing contact closure from sources such as proximity switches, limit
switches, selector switches, push buttons, photoelectric switches, and TTL-compatible devices.

Field Side Ratings
Open Circuit Voltage (Switch Open)	11 VDC min., 13 VDC typical, 15 VDC max.
Short Circuit Current (Switch Closed)	6 milliamps nominal
Minimum Off Resistance	≥20 K ohms
Maximum Allowable On Resistance (Wire + Contact Resistance)	500 ohms
Logic Side Ratings
Logic Output Voltage for G4IDC5-SW (normally open)	<0.5 V max. (switch closed; LED on) @ 2 mA sinking 2.7 V min. (switch open; LED off) @ 0.4 mA sourcing
Logic Output Voltage for G4IDC5-SWNC (normally closed)	<0.5 V max. (switch open; LED on) @ 2 mA sinking 2.7 V min. (switch closed; LED off) @ 0.4 mA sourcing
Maximum Operating Common Mode Voltage (Field Term to Logic Connector)	250 V
Power Requirements:	5 VDC (±0.25) @ 25 mA nom.
Module Ratings
Number of Channels Per Module	1
Turn-on Time	8 msec typical
Turn-off Time	8 msec typical
Input-to-output Isolation (transient)	4000 V AC/DC
Temperature	0 °C to 70 °C, operating -30 °C to 85 °C, storage

Rev: 04/13