OPT-B1

Product 43 of 173
Zoom
OPT-B1

OPT-B1

Select Item #: OPT-B1
OPTOMUX I/O Systeme, I/O-Logik Platine für max 16 digitalen Kanäle
plus VAT Weight: 0.3 kg RegulÀr Regular Neu New
B1 OPTOMUX 16 CHANNEL BRAIN
Opto 22 B1 Opto 22 Logo

The B1 brain board is an intelligent processor that operates as a slave device to a host computer, via an RS 422/485
serial link, to control digital I/O modules. The B1 mounts on Opto 22 I/O racks with header connectors; racks are
available that accept Standard (G1), G4, Quad Pak, or SNAP I/O modules. The B1 uses the Optomux protocol.
Note that the E1 brain board is a drop-in replacement for the B1 and adds Ethernet capability as well as support for
multiple protocols, including Optomux, Modbus/TCP and OptoMMP.
 

B1 Power Requirements

5 .0 - 5.2 VDC @ 0.5 amps
(includes digital module requirements)

B2 Power Requirements

5 .0 - 5.2 VDC @ 0.5 amps
(excludes analog module requirements*)

Operating Temperature

0 °C to 70 °C
95% humidity, non-condensing

Interface

RS-422/485 communications
50-pin female header connector to I/O mounting rack

Data Rates

300, 600, 1200, 2400, 4800, 9600, 19200, and
38400 baud

Range:
  Multidrop

  Repeat Mode


Up to 5,000 feet total length with up to
32 Optomux stations maximum. **
Up to 5,000 feet between stations with up to 256
Optomux stations maximum.

Communications

Full duplex, two twisted pairs, a signal common
wire, and a shield

LEDs

Power, receive, and transmit


Jumper-selectable
Options

Address (0 to 255)
Baud rate
Multidrop or repeat mode
2- or 4-pass protocol

** ±15 VDC ± 0.25 V required for the analog modules. Current depends on the
number and type of modules installed. A 24 VDC power supply is required for
analog modules that need a current loop source.
* Extend line length and/or number of OPTOMUX stations with the AC30A/B
network adapter.

Rev: 04/13

* plus shipping