Did you forget your password?
No problem! Here you can set up a new password.
- Your e-mail Address:
  Specify a value for this required field. Please enter a valid e-mail address
When you click on "Request Password", you'll be sent an e-mail with instructions how to set up a new password.

If you don't get an e-mail with your access data, please make sure that you have already registered with us. As soon as you are registered, you can login with your e-mail address and your password.
- If you are sure you are already registered, please check the e-mail address you entered as user name.
In case you still have problems logging in, please turn to us by e-mail: order@swd.de
Login

Login

E-mail address

Password ?

Remember me
Register

We have moved AGAIN

Back to overview

OPT-M4SENET-100

Zoom

OPT-M4SENET-100

Item #: OPT-M4SENET-100

No ratings.

OPTO 22 M4SENET-100 M4 Ethernet Adapter for OPTO 22 M4 family of modular controllers

875,00 €

plus VAT Weight: 0.3 kg RegulÃ€r

Regular

New

Product images

Description

The M4SENET-100 provides an Ethernet interface for M4 series controllers such as the SNAP-LCM4 and the M4RTU. Connection is via a 10Base-T or 100Base-TX link, and standard TCP/IP transport is used for all transactions. NOTE: This Ethernet card is designed for use with FactoryFloor software.

ItemSpecification
Card Type	Ethernet NIC, communication coprocessor
Transports Supported	TCP/IP
Maximum Sessions	128 total; up to 128 for SNAP Ethernet I/O, up to 32 for host or peer
Communications	Ethernet 10Base-T or 100Base-TX Auxilliary: RS-232C (for maintenance and kernel downloads)
Data Rate	10 or 100 Mbps auto-detected on Ethernet 19.2 Kbps or software selectable on serial port (maximum 115.2 Kbps)
Cable Type	Solid-core unshielded twisted pair, Category 5 recommended for 10 Mbps and required for 100 Mbps
Maximum Distance	100 meters from hub tu node for single segments
Connectors	One RJ-45 Ethernet One five-position Phoenix type for serial port
Current Draw	1.00 Amps
Jumpers (Internal)	Boot to kernel/Boot to loader Normal operation/Restore factory defaults
Operating Temperature	0 to 70°C
Storage Temperature	-40°C to 85°C
Humidity	0-95% humidity,non-condensing

Rev: 02/17

Login

OPT-M4SENET-100

OPT-M4SENET-100