TRY-TRP-C08H

TRP-C08H  USB 2.0 to 2 ports RS-232 and 2 ports RS-422/485 Isolated Converter

Introduction

The TRP-C08H allows you to simultaneously connect 2 RS-232 and 2 RS-422/485 serial devices

to system by using a USB interface. The RS232 interface support all common PC DTE

connection type. For RS-422/485 data lines TRP-C08H provides auto-detecting function

in data format, baud rate and data direction flow control, it may automatically configure

RS-422/485 signals and baud rate without external switch setting. TRP-C08H is equipped

with 3000V DC of isolation and internal surge protection to protect the host computer and

converter against high voltage spikes, as well as ground potential differences.

TRP-C08H features a high-speed 256KB transmission rate, and supports various O.S.

The industry standard DIN rail design enables users a fast and professional installation.

Features

USB-2.0 device controller.
Allow user custom adjust baud-rates.
Each Port can impendent set up the baud-rate and data format.
On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port.
System gets four serial port when the converter plug in.
Auto switching RS422/485 detecting.
Auto direction flow control on RS485.
Auto baud rate switching from 300bps to 256 Kbps.
Direct power from USB port , no need external power supply.
3000 VDC isolation protection on RS422/485.
Surge protection on RS422/485 data line.
Power and TXA/RXA/TXB/RXB communication LED indicator
Din-Rail (option)or panel mount Driver support:
Driver Support: Android/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0,

and Linux, and Mac OS .

Specifications

Input: USB 2.0 protocol.
RS232 output: Standard 9 pin DTE full-duplex.
RS422 output: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
RS485 output: Differential 2 half-duplex wires (D+, D-).
Data Format: Asynchronous data with all common combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Cable: USB 2.0 type A to type B cable.
Communication speed: form 300bps to 256Kbps.
RS-422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
RS-232 line protection: +/- 15KV ESD.
Distance: RS-422/485 Up to 4000ft (1250M).
Connection type: Screw terminal for maximum AWG #12~30 wire.
DIN rail and panel mount support.
Two power input: USB power or external Power.
Power consumption: 260mA by USB power.
RS422/485 Optical Isolation: 3000V DC.
Operating environment: 0 to 65℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 75mm X 26mm.
Weight: 395g.
Humidity: 10-90% non-condensing. . 

Rev: 09/21