OPT-SNAP-PAC-SB1

SNAP-PAC-SB1 SNAP PAC Serial Brain, analog/digital, with high-speed digital functions

The SNAP-PAC-SB1 brain is an I/O and communications processor for your SNAP PAC System. Designed primarily to
work in distributed systems controlled by a SNAP PAC S-series controller, the SNAP-PAC-SB1 provides local intelligence
that frees the controller for supervisory tasks.
 
As an I/O processor, the SNAP PAC brain independently handles functions such as latching, counting, thermocouple
linearization, watchdog timers, and PID loop control. These functions continue to work on the brain even if
communication with the SNAP PAC controller is lost.
 
The SNAP-PAC-SB1 brain supports all the SNAP I/O analog and digital input and output modules available on the Opto
22 website. These modules can all be mixed on the same mounting rack and placed in any position on the rack. The
brain and modules mount on a SNAP PAC rack, which holds up to 4, 8, 12, or 16 modules.
 
In addition to I/O processing, the SNAP-PAC-SB1 brain communicates over an RS-485 serial network (2-wire or 4-wire),
and multiple SB-series brains can be installed in a multi-drop (daisy-chain) configuration.
 
The SNAP-PAC-SB1 brain offers high-speed digital functions, including high-speed counting (up to 20 KHz), quadrature
counting, pulse generation and measurement, and TPO (time-proportional output). If you do not need high-speed digital
functions, choose the SNAP-PAC-SB2 brain instead.
 

Ethernet and Serial Brains
Power Requirements	5.0–5.2 VDC at 750 mA maximum (does not include module power requirements)   -W Models: 5.0–5.2 VDC at 1.0 A maximum (not including module requirements)
Memory	16 MB RAM
Backup battery for real-time clock	Rechargeable (recharges whenever the brain has power). 5-year life when power is off. (Models manufactured before August 2007 have user-replaceable batteries. See original user guide for details or contact Product Support.)
Hold-down screw	Torque: 8 in-lb (0.9 N-m)
Operating Temperature	0 to 60 °C
Storage Temperature	-40 to 85 °C
Humidity	0–95% humidity, non-condensing
Agency certifications	(-W models only) U.S., FCC Part 15 Subpart C; Canada, IC RSS-210 (-FM models only) Factory Mutual approved   All models: CE, RoHS, DFARS
Warranty	30 months from date of manufacture
Ethernet Brains (EB) only
Wired Ethernet Network Interfaces	IEEE 802.3 network, 10Base-T and 100Base-TX. Automatic MDC/MDI-X crossover (Ethernet crossover cable not required for direct connection to PC). Two switched interfaces, allowing multi-drop (daisy-chain) or standard star network configuration.
Maximum Ethernet Segment Length	100 meters with Category 5 or superior UTP For 100 Mbps at this distance, use Category 5 or superior solid UTP.
Wireless LAN interface*   Topologies   Security     Frequency 802.11a   Frequency 802.11b/g   Transmit Power   Antenna Connector   Roaming	Separate IP address Infrastructure, Ad-Hoc 802.11i: AES - Compatible with WPA2 Personal, TKIP - Compatible with WPA Per­sonal, WEP. Note: TKIP/AES security is not supported in Ad-Hoc mode. 5.180–5.24 GHz, 5.745–5.825 GHz 2.412–2.472 GHz, 2.484GHz 15 dBm maximum Reverse polarity SMA (RP-SMA or RSMA) Supported within an SSID (Service Set Identifier) only
Serial Brains (SB) only
Network interfaces	RS-485, 2- or 4-wire, twisted pair(s), with shield
Serial data rates	300 baud to 230.4 Kbaud
Range: Serial multidrop	32 stations maximum on a segment (including PC, controller, repeaters, and I/O units); up to 3000 ft (914 m) on a segment
* Requires Wired+Wireless model (SNAP-PAC-EB1-W or SNAP-PAC-EB2-W)

Rev: 04/13