BET-CT-N108-V2.8

Product 4 of 162
Zoom
BET-CT-N108-V2.8

BET-CT-N108-V2.8

Select Item #: BET-CT-N108-V2.8
B&E CT-N108 V2.8 Network Arcnet Adapter, ISA, 8-bit BNC QNX2 + QNX4, (former Corman Tech)
plus VAT Weight: 0.3 kg Empfohlen Recommended Neu New

B&E CT-N108 V2.8 Network Arcnet Adapter


 

         Hersteller / Producer: B&T former Corman Technologies, Inc.

   Produkt-Bez. / brand name: CT-N108 V2.8

    TECHNISCHE SPEZIFIKATIONEN / technical Specification

  • Rev: V2.8                                          Mbps: 2.5                     Bus: ISA                                         Bit: 08               IRQ: 03-07
  • Topology: S                               Connector: BNC          Arcnet-Chip: COM90C66           Style: QFP          Length [mm]: 130/145
  • Style Legend: DIL(Dual In-Line),     LCC(Leaded Chip Carrier),     QFP(Quad Flad Pack),     Topology: S(Star), B(Bus)

ARCNET Adapter PC Coax QNX 
Dieser Adapter ist eine angepasste ARCNET Adapter hergestellt ausschließlich für QNX Software Systems Ltd Dieses Produkt ist jetzt erhältlich. Ursprüngliche QNX Software Systems Teilenummer: 003049.


./images/Products_69.jpg

 

B&E Technologies CT-N108

CorNet Arcnet Adapter PC Coax QNX

DESCRIPTION
This is a coax ARCNET adapter. This adapter is fully compatible with both QNX 2 and QNX 4.
   
OPERATING ENVIRONMENT
Power: +5V DC +/-5% @ 1A (typicalles than 200mA)
-12V DC +/- 5% @ 21 mA
Operating Temperature: 0 to 43 ºC
Storage Temperature: -40 to 125 ºC
Humidity: 5% to 80% (non-condensing)
Signal Levels: Transmit: 15.4 Vp-p Receive sensitivity: 3.0 Vp-p
   
ARCNET LAN INTERFACE
Modified Token Passing Local Area Network
2.5 Megabaud transmission rate
Supports up to 255 nodes
Requires only 8 kbytes of Address Space
IBM PC, XT, AT and compatible
Switch selectable memory map base address (CC00,CE00,DC00,DE00,EC00,EE00)
Menu selectable node ID and interrupt level (levels 2,3,4,5,6 & 7)
2 KB dual ported RAM buffer for high speed interleaved message transfer
Software reset capability
   
PHYSICAL SPECIFICATIONS
PCB mounted low profile BNC connector to RG-62 A/U 93 Ohm ciaxial cable
green LED indicates that the network is operating normally
red LED indicates node activity
Short length 8 Bit ISA Bus Card ( 4.97" long)
   
INSTALLATION CONSIDERATIONS
Coax cable type RG62A/U93 ohm with BNC connectors
Coax distances From node to hub 2000 ft. (600m)
Total network span up to 22,000 ft (6600m) (using standard time-outs)
Maximum of 10 active hubs may be between any two nodes on the network
   
CONFORMS TO THE FOLLOWING STANDARDS
ARCNET: ANSI 878.1
EMC: EN55022:1994 (Emissions)
CISPR 22 1993-12 Class A
FCC Part 15 Class A
EN 50082-1 (Immunity)
IEC 801-2:1991
8KV Contact, 15KV Air
IEC 801-3:1984
3V/m
IEC 801-4:1988
0.5 KV Signal line,
1 KV Power line
European CE compliance
 

 

Rev: 11/21

Bus ISA
* plus shipping