DAN-EN-2900ST
Ethernet Fiber Card, ST Model No.: EN-2900ST |
![]() |
EN-2900ST 32-bit PCI Bus Ethernet LAN cards, are in full compliance with PCI Revision 2.x and IEEE 802.3 Ethernet 10Base-FL standards. |
FEATURES
EN-2900ST 32-bit PCI Bus Ethernet LAN cards, are in full compliance
with PCI Revision 2.x and IEEE 802.3 Ethernet 10Base-FL standards.
Utilizing Realtek high-throughput PCI bus single-chip Ethernet controller,
EN-2900SC features PnP (Plug and Play) auto-configuration function and
driver fully compatible with Novell NE2000. With high-throughput PCI
bus and on-board 8K x 8 remote Boot ROM built-in, EN-2900ST is perfect
for both server and diskless workstation configuration.
EN-2900ST is equipped with ST connectors(Tx, Rx). Campus network can be
established via using EN-2900ST on the server or workstation for 10Mbps
data rate with multimode fiber optic cable. The node to node distance
can be up to 2Km by applying EN-2900ST. LED indicators are available
for network monitoring and diagnosis
Item | SPECIFICATIONS |
Standards | IEEE 802.3 Ethernet 10Base-FL/FOIRL |
Connector | ST(multi-mode) connectors Tx/Rx |
Cable | Fiber : 50/125, 62.5/125, 100/140µm multi-mode |
Maximum Wire Length | Node to Node : 2Km Node to Hub : 2Km |
Data Transfer Mode/Speed | PCI bus 10Mbps speed Half duplex mode |
Diagnostic LEDs | Link and Activity |
NOS Supported |
NetWare, IntraNetWare, Windows NT, Windows 95,
Windows for Workgroups, IBM LAN Server, Lantastic/AI, SCO Unix |
Power Requirement | 2.0A @ + 5V |
Ambient Temperature | 0°C to 50°C |
Humidity | 5% to 90% |
Dimensions | 123mm(L) x 61mm(H) |
Apporval | FCC Part 15 Class A & CE |
Rev: 04/13
Bus | PCI |
---|