DAN-MGS2824G

*** DISCONTINUED; REPLACED BY MGS2924G *** 8 GbE TP + 16 GbE SFP L2 Managed Switch (max. 24 ports)

FEATURES QoS Supports Layer 4 Classification The switch supports not only Layer 2 802.1p Priority Queue control, but also programmable higher layer classification and prioritization, which enable enhanced Quality of Service (QoS) supporting for real time applications based on information taken from Layer 2 to Layer 4, such as VoIP. Port Mirroring Helps Supervisor Monitoring Network Port Mirroring copies traffic from a specific port to a target port. This mechanism helps to track network errors or abnormal packets transmission without interrupting the flow of data. Q-in-Q VLAN For Performance & Security The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. VLAN supports enabling advanced techniques such as "802.1 Q-in-Q" to be deployed. 802.3ad LACP For Bandwidth Aggregation The Gigabit ports can be combined together to createa multi-link load-sharing trunk. Up to 12 Gigabit ports can be set up per trunk for bandwidth up to 24Gbps; all traffic is aggregated based on MAC addresses, thus balancing the traffic load. The switch supports up to 8 trunking groups. Port trunks are useful for switch-to-switch cascading, providing very high full-duplex speeds. 802.1x Access Control Improve Network Security 802.1x feature enables user authentication for each network access attempt. Port security feature allows you to limit the numbers of MAC addresses per port in order to control the numbers of stations for each ports. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the numbers of access stations. 802.1d Compatible & 802.1w Rapid Spanning Tree For mission critical environments with multiple switches supporting STP, you can configure the switch with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network. Broadcast/Multicast Storm Control To limited too many broadcast/multicast packets flooding in the network, the Broadcast/Multicast Storm Control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

TECHNICAL SPECIFICATIONS

• Model: MGS2508G
• Standards: IEEE 802.3 / 802.3ab / 802.3z / 802.3u / 802.3x
• Connectors/Slots:
  Front Panel
  — 8 10/100/1000Mbps GbE RJ-45 auto MDI/MDI-X (Ports 1 to 8)
  — 16 1000Mbps GbE SFP slots for fiber modules (Ports 9 to 24)
  Rear Panel
  — 1 RS-232 DB-9 Mail Console Port
  [ Setting: Baud 57600, Data 8, Stop 1, Parity N, Flow NONE ]
• Add-on Modules (Sold Separately):
  DX-SFP.SX — 1000Base-SX Multi-Mode SFP Duplex-LC, 850nm
  DX-SFP.L10 — 1000Base-LX SIngle-Mode SFP Duplex-LC, 1310nm
  DX-SFP.L40 — 1000Base-LX SIngle-Mode SFP Duplex-LC, 1310nm
  DX-SFP.L70 — 1000Base-LX Single-Mode SFP Duplex-LC, 1550nm
  DX-SFP.3L20 — 1000Base-LX SIngle-Mode SFP Simplex-LC, TX 1310nm
  DX-SFP.5L20 — 1000Base-LX Single-Mode SFP Simplex-LC, TX 1550nm
• Data Transfer Rate:
  10/100/1000Mbps (auto-negotiation or forced mode) for TP
  1000Mbps for fiber
• Cable / Max Distance:
  50/125, 62.5/125µm Multi-Mode fiber, 220m
  9/125µm Single-Mode fiber, 10~70km (SFP module dependent)
  Category 5 or up UTP, 100m for 100Base-TX and 1000Base-T
  Category 3 or up UTP, 100m for 10Base-T
• Duplex Mode:
  Full for 1000Base-SX/LX/T, and
  Full/Half (auto-sense or forced-mode) for 10/100Base-TX
• MAC Address: 8K MAC addresses
• Flow Control:
  IEEE 802.3x compliant for Full-duplex
  Back pressure flow control for Half-duplex
• LEDs:
  Unit — POWER, CPU
  Per Port (TP/SFP) — LINK/ACT
• Power Requirement: 100~240V AC, 50/60Hz, max 30W consumption
• Ambient Temperature: 0° to 40° C
• Humidity: 5% to 90%
• Dimension:
  44 x 442 x 209mm (H x W x D), 19" Rack-mountable with brackets
• Safety: FCC Class A, CE Mark Approval, RoHS Compliance

Rev: 04/13