Sie haben Ihr Passwort vergessen?
HIL-COMX-CA-RE
Hilscher comX |
|
netX based comX-Modules get their identity by loading an appropriate firmware file. The following real-time Ethernet protocols are supported: EtherCat, EtherNet/IP, Powerlink, Modbus IDA, PROFINET, SERCOS-III All stacks are implemented as slave type protocols and are executed on the comX-Module. Data exchange with the host application is carried out via a dual-port memory interface. The process data images are available directly via memory read and write functions. The comXModule features two RJ45 connectors for Ethernet. |
|
| Facts at a glance: | |
| All Real-Time Ethernet Systems can be configured by netX Network Controller | |
| Two Ethernet Ports with Switch and Hub for Line Topology | |
| System/Status/Link/Activity LEDs | |
| 8 or 16-Bit Host Application Interface | |
| USB & UART Diagnostic Interface | |
| Direct access to process Data in Dual Port memory | |
| No Development Risk | |
| SyCon.net Configuration Tool based on FDT/DTM Technology | |
| Product | comX |
| EtherCAT Slave | |
| Acyclic Data | SDO Master/Slave |
| SDO Slave/Slave | |
| Functions | 3 FMMUs and 4 SYNC-Manager |
| COE (CANopen over Ethernet) | |
| Complex Slave | |
| Emergency | |
| Cyclic Data | max. 400 Bytes |
| EtherNet/IP Adapter | |
| Cyclic Data | max. 1008 Bytes |
| Unscheduled Data | max. 1400 Bytes per Telegram |
| Funktionen | Cyclic Connection |
| DHCP, BOOTP | |
| one E/A Connection | |
| max. 8 Connections | |
| UCMM supported | |
| Server Services | Get_Attribute_All |
| Get_Attribute_Single | |
| Set_Attribute_All | |
| Set_Attribute_Single | |
| PROFINET IO Device | |
| Cyclic Data | max. 2048 Bytes (IOCR) |
| Acyclic Data | Read/Write Record, max 1024 Bytes/Telegram |
| Functions | Context Management over CLRPC |
| DCP | |
| Process- and Diagnostic Alarm | |
| 1 Submodul | |
| Diagnostic, max 200 Bytes/Telegram | |
| max. 244 modules | |
| variance comparison of the configuration | |
| VLAN- and Priority-Tagging | |
| Modbus TCP/IP Server | |
| Function code | 1,2,3,4,5,6,15,16 |
| Register (16-Bit) | max. 120 or 125 Register per Telegram |
| Coil (1-Bit) | max. 1968 or. 2000 Coils per Telegram |
| Message Modus | Server |
| In/Out-Data Image not used | |
| E/A-Modus Server | max. 11520 Byte E/A Data |
| SERCOS III Slave | |
| Realtime Data | max. 2800 Bytes |
| Acyclic Data | Service Channel Read/Write/Standard Kommands |
| Functions | Max. 8 Subdevices |
| Phase Run Up | |
| Synchronization | |
| Ring and Line Topology | |
| Version | V1.1 |
| EtherCAT Master | |
| Cyclic Data | max. 11520 Bytes |
| Acyclic Data | CoE (CANopen over EtherCAT)Up-/Download |
| Functions | Emergency |
| Get OD List | |
| Topologie: Linie | |
| EtherNet/IP Scanner/Master | |
| Cyclic Data | max. 11520 Bytes |
| Unscheduled Data | max. 504 Bytes per Telegram |
| Functions | Cyclic Connection |
| DHCP, BOOTP | |
| max. 64 Connections | |
| UCMM supported | |
| Client Services | Get_Attribute_Single/All |
| Set_Attribute_Single/All | |
| PROFINET IO Controller | |
| Cyclic Data | max. 6144 Bytes |
| acyclic data | Read/Write Record, max. 4096 Bytes/Request |
| Functions | Alarm Handling |
| Context Managment over CLRPC | |
| DCP | |
| max. 32 Devices | |
| minimum cycle time 1 ms | |
| Pro Device one Puffer available for Diagnostic Data | |
|
PowerLink Controlled Node/Slave |
|
| Cyclic Data | max. 2980 Bytes |
| Acyclic Data | SDO Up-/Download |
| Functions | SDO over ASND and UDP |
| Poll Request/Response | Response Time 1?s |
| Version | V2 |
| Diagnostic interface | UBS/UART |
| System interface | 8/16-Bit Dual-Port-Memory |
| Operating voltage | 3V / max. 600mA |
| 3,3 V / max. 750 mA | |
| Operating temperature | 0 °C ... 60 °C |
| Dimensions (L x W x H) | 70 x 30 x 21.5 mm |
Rev: 01/19
