OPT-SNAP-IDC-32-FM

SNAP-IDC-32-FM SNAP 32-channel Digital Input Module, 10-32 VDC, Factory Mutual Approved

The SNAP-IDC-32-FM 32-channel digital input module provides 32 digital input channels in one compact SNAP module. The SNAP-IDC-32-FM is ideal for OEMs and others who have applications with high point counts, or for those requiring large numbers of digital input channels on one SNAP I/O rack. The high-density configuration reduces per-point costs of digital I/O systems by providing up to eight times as many I/O channels in the same space.
 
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley MicroLogix or other RSLogix-based PLC system,
such as ControlLogix or CompactLogix.
 
For easy field wiring, use the SNAP-IDC-HDB breakout rack and the SNAP-HD-BF6 header cable. A wiring harness with
flying leads (SNAP-HD-CBF6) is also available.
 
The SNAP-IDC-32-FM is Factory Mutual approved. If you do not need FM approval, see the SNAP-IDC-32 instead.
 

	SNAP-IDC-32 SNAP-IDC-32-FM	SNAP-IDC-32N
Input Range	10 to 32 VDC	-10 to -32 VDC
Nominal Voltage Range	24 VDC	24 VDC
Input Resistance	20 K ohms	20 K ohms
Logic Voltage and Current	5 VDC ± 0.1 @ 150 mA	5 VDC ± 0.1 @ 150 mA
Input Arrangement	32 input channels; 4 groups of 8 inputs each (Points in each group share a common negative connection.)	32 input channels; 4 groups of 8 inputs each (Points in each group share a common positive connection.)
Channel-to-Channel Isolation	No channel-to-channel isolation; 100 V group-to-group isolation	No channel-to-channel isolation; 100 V group-to-group isolation
Hold-down screws Connector screws	Torque: 4 in-lb (0.45 N-m) Torque: 5.26 in-lb (0.6 N-m)	Torque: 4 in-lb (0.45 N-m) Torque: 5.26 in-lb (0.6 N-m)
Maximum Number of HDD Modules on One Mounting Rack	16	16
Indicators	None; use optional OptoTer­minal-G20 diagnostic display or breakout rack.	None; use optional OptoTer­minal-G20 diagnostic display or breakout rack.
ON Voltage	10 VDC @ 0.5 mA	10 VDC @ 0.5 mA
OFF Voltage	3 VDC @ 0.1 mA	3 VDC @ 0.1 mA
Polling time from I/O processor to module1	2–30 ms typical2	2–30 ms typical2
Input Turn-On/Off Time	6 ms	6 ms
Counting Frequency (DC input)	0–50 Hz @ 50% duty cycle	0–50 Hz @ 50% duty cycle
Agency Approvals	UL, CE, RoHS, DFARS FM (-FM model only)	CE, RoHS, DFARS
Warranty	Lifetime	Lifetime
1 Affects turn-on and turn-off determination 2 Time varies based on the SNAP PAC I/O processor (brain or on-the-rack controller), processor configuration, and Ethernet host communication activity.

Rev: 04/13