SEA-M200

Artikel 1 VON 10
SEA-M200

SEA-M200

Select Art. Nr.: SEA-M200
eI/O Baseboard module interface to eI/O series I/O boards Digital I/O Interface Adapter
zzgl. MwSt. Gewicht: 0.6 kg RegulÀr Regulär Neu Neu

SEALEVEL M200
eI/O Digital Baseboard

 SEALEVEL Logo

The M200 baseboard module connects eI/O family interface modules to digital control boards (e.g. Sealevel’s PIO series of boards and USB adapters) via a 50-pin ribbon cable. This cabling is backward compatible with PB-24/32 connections. System power can be input from the ribbon cable, an external 5VDC input or external 9VDC to 30VDC input using the on-board regulator. On-board LEDs indicate input power status and connection of up to four eI/O modules. Get a jumpstart on your digital I/O development with The Digital I/O Handbook that will provide helpful information that you will use again and again. Check out Chapter 1 for an overview of logic principles. Baseboard module interfaces to eI/O M-Series I/O boards
Technical Specifications
Power Requirements 5V @ 75mA Selectable:
5VDC through ribbon cable
5VDC via terminal block
9 - 30VDC using on-board regulator (1A max.)
Connector 50-Pin Header
Dimensions 2.5" (L) x 4.2" (W)
Operating Temperature 0 - +70°C
Storage Temperature -50° - +105°C
Humidity Range 10 - 90% R.H.

Features:

  • Easily connects to Sealevel PIO boards using 50-pin header connector
  • Convenient edge connector can daisy-chain up to four eI/O modules
  • Green LED indicates power to the board
  • Four red LEDs indicate connection of up to four eI/O modules
  • Supports multiple power options

Rev: 04/13

* zzgl. Versandkosten