Sie haben Ihr Passwort vergessen?
COR-CT-E101
CT-E050T/CT-E050C
CorNet Ethernet Multimode Media Converter
DESCRIPTION
The CT-E050T and the CT-E050C media converters change an Ethernet 10base-T copper wire based signal to a 10base-FL multimode fiber optic based signal. When used in a point-to-point full duplex connection, the converter extends the distance of Ethernet network links to a maximum of 2km using multimode fiber cable. Users can select from either ST or SC connectors.
OPERATING ENVIRONMENT
| Power: | +12VDC @ 800mA min |
| Operating Temperature: | 0ºC to 40ºC |
| Storage Temperature: | -40ºC to 70ºC |
| Operating Humidity: | 10% to 90% (non-condensing) |
| Storage Humidity: | 5% to 90% (non-condensing) |
LAN INTERFACE
| 10Mbps transmission rate |
| 10base-T: RJ-45 connector |
| 10base-FL: ST or SC multimode connector |
PHYSICAL SPECIFICATIONS
| PCB mounted fiber optic ST or SC module | |
| LED indicator for power | |
| LED indicators for link | |
| UTP: | indicates 10base-T link is established and activity on port |
| FX: | indicates 10base-FL link is established and activity on port |
| Dimensions: |
101mm x 96mm x 25mm (WxDxH)
3.98” x 3.78” x 0.98” |
WARRANTY
2 years
INSTALLATION CONSIDERATIONS
10 base-FL ETHERNET
Fiber Optic Cable
- 62.5/125µm 850nm multimode fiber optic cable is recommended
- Dual ST or SC connectors
- Distance from port to port: 2km (1.25 miles)
10 base-T ETHERNET
Twisted Pair Cable Type
- Category 5 unshielded twisted pair
- Distances From node to hub: 100m (325 ft)
- RJ-45 connector
CONFORMS TO THE FOLLOWING STANDARDS
| 10base-T: |
IEEE 802.3 10base-FL IEEE 802.3 10base-T |
|
| EMC: | EN 50081-1:1992 | |
|
EN55022:1998 EN61000-3-2:1995 EN61000-3-3:1995 |
CISPR 22:1997 IEC1000-3-2:1995 IEC1000-3-3:1994 |
|
| EN 50082-1:1997 | ||
|
EN61000-4-2:1995 EN61000-4-3:1996 EN61000-4-4:1995 |
IEC 61000-4-2:1995 IEC 61000-4-3:1995 IEC 61000-4-4:1995 |
|
| Products are marked as certified to the CE standards | ||
Rev: 04/13
| Bus | ISA |
|---|
