OPT-SNAP-AIV

Artikel 1092 VON 1293
Zoom
OPTO 22 SNAP 2-channel -10VDC to +10VDC Analog Input Module
zzgl. MwSt. Gewicht: 0.2 kg RegulÀr Regulär Neu Neu
SNAP-AIV SNAP 2-Ch -10VDC to +10VDC Analog Input Module
Opto 22 SNAP-AIV Opto 22 Logo
The SNAP-AIV provides two channels of analog voltage input, either -10 to +10 VDC or -5 to +5 VDC. Although the two
channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules
and devices. Modules are factory calibrated.
 
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted
controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-
based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix,
MicroLogix, or CompactLogix.
 
If you need channel-to-channel isolation, see SNAP-AIV-i.
 
For a four-channel module, see SNAP-AIV-4. For a 32-channel module, see the SNAP-AIV-32 (requires a SNAP PAC brain
or R-series controller).
 
Input Range From -10 volts to +10 volts
From -5 volts to +5 volts
Over-Range Limits From -11 to +11 volts (+/-10 V range)
From -5.5 to +5.5 volts (+/-5 V range)
Resolution 0.4 mV when configured -10 to +10 volts
0.2 mV when configured -5 to +5 volts
Input Filtering -3 dB @ 64 Hz
Input Response Time
(% of span/delta V/delta t)
63.2%/6.7 V/10 ms
Data Freshness (Max) 11.5 ms (2-channel, +/- 10 VDC)
23 ms (2-channel, +/- 5 VDC
23 ms (4-channel, +/- 10 VDC)
46 ms (4-channel, +/- 5 VDC)
DC Common Mode Rejection >-120 dB
AC Common Mode Rejection >-120 dB @ 60 Hz
Maximum Survivable Input 220 VAC or 300 VDC
Maximum Operating Common Mode Voltage 250 V
Accuracy 0.05%, 5 mV @ 10 VDC
2.5 mV @ 5 VDC
Gain Temperature Coefficient 30 PPM/ °C
Offset Temperature Coefficient 15 PPM/ °C
Isolation 1500 V
Power Requirements 5 VDC (±0.15) @ 170 mA
Input Resistance 1 M ohms (each channel; both channels share the same reference point)
Ambient Temperature:
  Operating
  Storage

0 °C to 70 °C
-25 °C to 85 °C
Torque, hold-down screws 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m)
Agency Approvals UL, FM, CE, RoHS, DFARS
Warranty Lifetime

Rev: 04/13

* zzgl. Versandkosten