DAN-CEM0100

Artikel 1847 VON 7058
Zoom
DAN-CEM0100

DAN-CEM0100

Select Art. Nr.: DAN-CEM0100
Media Converter 10Base-2 BNC<>10Base-T RJ-45
zzgl. MwSt. Gewicht: 0.5 kg RegulÀr Regulär Neu Neu

10Base-2 BNC <> 10Base-T RJ-45 Ethernet Converter

OVERVIEW

CEM0100 is a media translator that translates the signals between Ethernet 10Base-T UTP medium and thin Ethernet 10Base-2 coaxial medium. Collision data is also translated to ensure 100% collision detection in any combination of network segments or devices. CEM0100 is an ideal solution to provide the connection between 10Base-T and Thin-Net backbone where BNC port is not available on the existing 10Base-T concentrator. Instead of replacing the 10Base-T concentrator with the one equipped with BNC port, CEM0100 can provide the solution at very low cost.

With the size similar to a match box, CEM0100 can easily be installed in the limited space environment. 4 diagnostic LED indicators provide clear and quick diagnosis if any network problem is encountered. CEM0100 comes with an external AC power adapter.

CEM0100

DEVICE DRIVERS SUPPORTED

Filename: n/a
Included Drivers:n/a

TECHNICAL SPECIFICATIONS

  • Model:CEM0100
  • PC Supported:n/a
  • Standards:IEEE 802.3 Ethernet 10Base-T and 10Base-2
  • Network Connector:
    UTP RJ-45 jack (MPR/DTE Switch Selectable), 1 BNC connector
    ( Both RJ-45 jack and BNC connector are located on the SAME end. Please refer to above picture.)
  • LAN Controller:n/a
  • Data Transfer Rate: 10Mbps
  • Duplex:Half
  • Cable:Unshielded Twisted-pair Category 3/4/5, RG-58A/U coaxial cable
    Cable Limitation:
    UTP (max.) : 100m (328ft)
    Coaxial (max. per segment) : 185m (607ft)
  • LEDs: POWER, BNC ACT, TP ACT, and COL
  • Power Requirement: 1A@+5V DC
    External Power Adapter:100-240V AC, 50/60Hz, 0.5/0.25A
  • Ambient Temperature: 0° to 50° C
  • Humidity: 5% to 90%
  • Dimensions:26.2 x 70.3 x 94 mm (H x W x D)
  • EMI Rating: FCC Part 15 Class A and CE Mark

Rev: 04/13

* zzgl. Versandkosten