COM-32065-4

• Network Interface10/100/1000BASE-TX; 100BASE-FX; 1000BASE SX/LX/LHX/XD/ZX Gigabit fiber
• Connector Type4 – RJ45 
  5 – RJ45/SFP combo
• EnclosureIP31 grade aluminum metal case
  Drop-waterproof and dustproof
• Installation MethodDIN rail
• LED IndicatorsPower 1, Power 2, system status, ring, digital input, digital output, RJ45 link/activity and link speed, SFP port link/activity and link speed
• Digital Input (DI)One DI, 4-pin screw terminal block
• Digital Output (DO)One DO (dry relay output), 4-pin screw terminal block
• Serial Console PortOne RJ45 RS-232 (TXD, RXD, signal GND), baud rate: 9600bps, data bits: 8, parity: none, stop bits: 1, flow control: none
• Thermal MonitoringEmbedded board-level thermal detector for main-chip temperature monitoring
• Dimensions5.0” x 6.3” x 3.7” 
  12.7cm x 16cm x 9.4 cm
• Product Weight2.9 lbs 
  1.32 kg

Ethernet Specification

• Number of PortsNine: 4 – RJ45 and 5 combo (RJ45/SFP)
• RJ4510/100/1000BASE-TX Auto MDI/MDIX, Auto-negotiation (speed/duplex mode)
• SFP (Optional)100BASE-FX fiber, 1000BASE-SX/LX/LHX/XD/ZX, Auto MDI/MDIX, Auto-negotiation (speed/duplex mode)
• Cable TypeCAT-3, CAT-4, CAT-5, CAT-5e, 6 (UTP or STP)
• Link DistancesRJ45: 100 Meters 
  SFP: depends on model: Single-Mode: 30KM, Multi-Mode: 2KM
• Port Alarm RelayYes
• Transfer Packet Size64 bytes to 1632 bytes (with 1522 VLAN Tag)
• StandardsIEEE 802.1AB: Link Layer Discovery Protocol (LLDP) 
  IEEE 802.1D-2004: Rapid Spanning Tree Protocol (RSTP) 
  IEEE 802.1p: Class of Service
  IEEE 802.1Q-2003: VLAN Tagging and GVRP
  IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP) 
  IEEE 802.1X: Port Based Network Access Control
  IEEE 802.3: 10BASE-T
  IEEE 802.3ab: 1000BASE-TX
  IEEE 802.3ad: Port Trunking with Link Aggregation Control Protocol (LACP) 
  IEEE 802.3u: 100BASE-TX Fast Ethernet and 100BASE-FX Fast Ethernet Fiber
  IEEE 802.3z: Gigabit Ethernet Fiber
  IEEE 802.3x: Flow Control and Back-Pressure
  IEEE 1588: Precision Time Protocol (PTP)

Management Features

• ConfigurationOut-band management: console port with command line interface (CLI) - similar to Cisco CLI, in-band management: web iInterface (HTTP/HTTPS) or a telnet/SSH console with CLI
• Embedded WatchdogEmbedded hardware watchdog time auto reset system in case of a switch system failure
• System Upgrade/BackupProvides TFTP/Web interface for firmware upgrade and configuration backup/restore
• SNMPV1, V2c, V3 with SNMP trap function, up to four trap stations
• SNMP MIBMIB-II, Bridge MIB, VLAN MIB, IGMP MIB, Ethernet-like MIB, Comtrol private MIB, and RMON
• Email WarningAutomatic warning, up to four accounts by pre-defined events
• System LogBoth local mode and server mode are supported
• DHCPDHCP client, DHCP server with IP and MAC address binding, port-based DHCP server configuraton and DHCP relay agent (option 82)

Network Performance

• Back-PressureIEEE 802.3x 1000Mbps half-duplex only
• Class of Service (CoS)IEEE 802.1p priority queues/port
• Flow Control Pause FrameIEEE 802.3x 10/100/1000Mbps full-duplex
• GMRPCARP multicast registration protocol
• IGMP SnoopingV1/V2 /V3 for multicast filtering and IGMP query V1/V2; supports unknown multicasting, processes forwarding policies: drop, flooding and forward to router port
• IP SecurityAssign authorized IP addresses to specific port, 10 max/port
• Loop ProtectionProvides Layer 2 loop prevention through the STP, RSTP, and MSTP. Loop protection increases the efficiency of STP, RSTP, and MSTP by preventing ports from moving into a forwarding state that would result in a loop in the network
• Modbus TCP/IPCLI support for Modbus TCP/IP communications with Function Code 4 (factory automation). Operates as slave/server device, while a typical master/client device is a host computer running appropriate through Ethernet, The Modbus TCP/IP master can read or write to the Modbus registers provided by the Modbus TCP/IP. application software (SCADA / HMI System)
• Packet Buffer Memory1MBits
• Port-Based Network Access ControlIEEE 802.1X: Supports User Authentication by the RADIUS Account, Password and Key for the RADIUS Servers (Primary and Secondary)
• Port ConfigurationPort link speed, link mode, port status, enable/disable
• Port MirroringOnline traffic monitoring on multiple selected ports
• Port SecurityAssign authorized MAC addresses to specific port, 10 max/port
• Port TrunkIEEE 802.3ad LACP with timer and static port trunk; trunk member up to 8 ports and maximum 4 trunk groups including gigabit Ethernet ports
• Private VLANDirect client ports in isolated/community VLAN to promiscuous port in primary VLAN
• Rate ControlIngress filtering for broadcast, multicast, unknown DA or all packets. Egress filtering for all packet types
• Switch Technology32Gbps switch fabric, store/forward switch technology, 8K MAC address
• System Throughput26 mega packets/second, 64 byte packet 
  Size, 14,880pps - 10Mbps; 148,800pps - 100Mbps; 1,488,100pps – 1000Mbps, max packet size 1632
• Traffic Prioritization (QoS)Supports 4 physical queues, weighted round robin queuing (WRR 8:4:2:1) and strict priority scheme, which follows 802.1p COS tag and IPv4 ToS/ diffserv information to prioritize industrial network traffic
• VLANIEEE 802.1Q tag VLAN with 256 (max) VLAN entries and 2K GVRP entries; 3 VLAN link modes: trunk, hybrid, and link access 
  IEEE802.1 QinQ supports double VLAN tag function for implementing metro network topologies

Network Redundancy

• Rapid Spanning Tree Protocol (RSTP)IEEE 802.1D-2004 rapid spanning tree protocol (RSTP)
  compatible with legacy STP and IEEE 802.1w
• Multiple Spanning TreeIEEE 802.1s MSTP, each MSTP instance can include one or more VLANs
• Redundant Ring TechnologyFailure recovery within 5ms
  Rapid dual homing: multiple uplink paths to upper switches
  Ring trunking: integrates port aggregate function in ring path to get higher throughput ring architecture
  Redundant ring: couple or multiples of up to 16 rapid super rings, supports up to 4 Gigabit ring in one switch

Electrical Specifications

• Device
  • DC Input Voltage
    (Positive or Negative)10.5 to 60VDC
  • Current Consumption+24VDC @ 1A
  • Power Consumption (Max.)24W
• Number of Power Connectors1
• Power Connector Type4-Pin screw terminal block
• Power Input RedundancyDual redundant inputs
• Reverse Polarity ProtectionYes
• Digital Input1 with photo optical isolation
  • Logic Low (0)0 to 10VDC
  • Logic High (1)11 to 30VDC
• Digital Output (Relay Output)1
  • Current Consumption (30VDC)1A maximum
  • Multi-Event Relay FeaturePower, Port Link, DI/Ring Status Change, Ping Reset, or Perform Routing Relay On/Off Function

Environmental Specifications

• Air Temperature
  • System On-40° to 75° C
  • System Off-40° to 85° C
• Operating Humidity (Non-Condensing)5% to 95%
• MTBF (Mean Time Between Failures)28.53 Years

Export Information

• Packaged Shipping Weight3.9 lbs 
  1.77 kg
• Package Dimensions11.3” x 5.5” x 9.1” 
  28.7cm x 13.97cm x 23.11cm
• UPC Code7-56727-32065-4
• ECCN5A992
• Schedule B Number8517.62.0050

Regulatory Approvals

•  
• EmissionsCanadian EMC Requirements
  ICES-003
  European Standard EN55022
  CISPR 22
  FCC Part 15 Subpart B
  Class A limit
• ImmunityEuropean Standard EN55024:
  IEC 1000-4-2/EN61000-4-2: ESD 
  IEC 1000-4-3/EN61000-4-3: RF
  IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
  IEC 1000-4-5/EN61000-4-5: Surge 
  IEC 1000-4-6/EN61000-4-6: Conducted Distrubance
  IEC 1000-4-8/EN61000-4-8: Magnetic Field 
  IEC 1000-4-11/EN61000-4-11: DIPS and voltage Variations
• SafetyIEC 60950/EN60950 (LISTED)
  CSA C22.2 No. 60950/UL60950 Third edition
• OtherEuropean Standard: 2002/95/EC Directive (RoHS)
  NEMA TS2 Certified
•