COR-CT-FE122

CT-FE122

CorNet 10/100TX Fast Ethernet Adapter PCI

• Supports:
  100Mbps 100base-TX Fast Ethernet (IEEE 802.3u)
  10Mbps 10base-T Ethernet (IEEE 802.3)
  
• 32 bit bus mastering
• Supports boot ROM
• Fully software configurable
• Drivers for QNX, Netware, Windows, etc.
• Diagnostic link LEDs
• Auto-negotiation for 100Mbps or 10Mbps operation on single RJ-45 network connector
• +3.3VDC, 0.378A max.
• Uses 2 pairs of unshielded twisted pair cabling (category 5 for 100base-TX Fast Ethernet or category 3 for 10base-T Ethernet)

This 100Mbit extension to the Ethernet standard allows significantly increased network throughput over 2 pairs of category 5 twisted pair wiring. The CorNet Fast Ethernet products are guaranteed to work with QNX.

DESCRIPTION

This is a 32-bit Bus Mastering Fast Ethernet Adapter for the PCI bus. It supports both 100Mbps Fast Ethernet and 10Mbps Ethernet connections to allow a gradual upgrade to a network. If appropriate cabling is present, simply attach the cable to a 100TX Hub or switch on the network. The adapter will switch automatically to the highest speed supported by the hub or switch. It supports jumperless Plug and Play configuration and Wake On LAN for ACPI compliant motherboards and operating systems.

OPERATING ENVIRONMENT

• Power: +3.3V DC @ 0.378A max
• Operating Temperature: 0 to 40ºC
• Storage Temperature: -40 to 70ºC
• Operating Humidity: 10% to 90% (non-condensing)
• Storage Humidity: 5% to 90% (non-condensing)

LAN INTERFACE

• 32-bit bus mastering PCI 2.1 bus
• 100 or 10Mbps transmission rate
• I/0 mapped (set by PCI BIOS)
• Interrupts (set by PCI BIOS)
• ROM: Optional Boot ROM
• PnP jumperless configuration by PCI bus BIOS
• Wake On LAN for ACPI compliant equipment and operating system
• Autodetect 100 or 10 Mbps network
• Drivers for most popular networking operating systems

PHYSICAL SPECIFICATIONS

• PCB mounted low profile RJ45 connector
• LED indicator for link, Yellow or green - indicates speed (10/100), 2nd Green - indicates node activity
• Standard PCI adapter: 59mmx130mm (2.32"x5.12")

WARRANTY

• 2 years

INSTALLATION CONSIDERATIONS

ETHERNET

Twisted Pair Cable Type

• Category 3 or better unshielded twisted pair
• Distances From node to hub: 100m (325 ft)
• Total network span: 500m (1320 ft)
  Based on recommended maximum of 5 links and 4 repeaters between nodes.

FAST ETHERNET

Twisted Pair Cable type

• Category 5 unshielded twisted pair
• Distances from node to hub: 100m (325 ft)
  Total network span: 205m (670 ft)

WAKE ON LAN

• 3-pin Wake On LAN connector with cable, ACPI compliant, Magic packet compatible
• Adapter to Motherboard cable included

CONFORMS TO THE FOLLOWING STANDARDS

• 100TX: IEEE 802.3u 100base-TX
  
• Ethernet: IEEE 802.3 10base-T
  
• EMC:
  • EN50081-1:1992, CISPR 22 Class A
    • EN55022/1998
    • EN61000-3-2/1995
    • EN61000-3-3/1995

     

  • EN55024:1998
  • IEC61000-4-2/1995
    • IEC 61000-4-2/1995
    • IEC 61000-4-3/1995
    • IEC 61000-4-4/1995
    • IEC 61000-4-5/1995
    • IEC 61000-4-6/1996
    • IEC 61000-4-8/1993
    • IEC 61000-4-11/1994

     

• Products are marked as certified to the CE standards

Rev: 04/13